Re: [PATCH v13 09/18] ARM: dts: n900: Add reg property to the LP5523 channel node

[Tony Lindgren]

* Dan Murphy <dmurphy@xxxxxx> [191016 16:01]:
> Add the reg property to each channel node.  This update is
> to accomodate the multicolor framework.  In addition to the
> accomodation this allows the LEDs to be placed on any channel
> and allow designs to skip channels as opposed to requiring
> sequential order.
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> CC: Tony Lindgren <tony@xxxxxxxxxxx>
> CC: "BenoÃt Cousson" <bcousson@xxxxxxxxxxxx>
> 
> k# interactive rebase in progress; onto ae89cc6d4a8c

Maybe check what's up with the line above :)

Othwerwise looks good to me, best to merge this together
with the rest of the series when ready:

Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>

> ---
>  arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++---------
>  1 file changed, 20 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 84a5ade1e865..643f35619246 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -607,63 +607,74 @@
>  	};
>  
>  	lp5523: lp5523@32 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		compatible = "national,lp5523";
>  		reg = <0x32>;
>  		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
>  		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
>  
> -		chan0 {
> +		chan@0 {
>  			chan-name = "lp5523:kb1";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <0>;
>  		};
>  
> -		chan1 {
> +		chan@1 {
>  			chan-name = "lp5523:kb2";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <1>;
>  		};
>  
> -		chan2 {
> +		chan@2 {
>  			chan-name = "lp5523:kb3";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <2>;
>  		};
>  
> -		chan3 {
> +		chan@3 {
>  			chan-name = "lp5523:kb4";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <3>;
>  		};
>  
> -		chan4 {
> +		chan@4 {
>  			chan-name = "lp5523:b";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <4>;
>  		};
>  
> -		chan5 {
> +		chan@5 {
>  			chan-name = "lp5523:g";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <5>;
>  		};
>  
> -		chan6 {
> +		chan@6 {
>  			chan-name = "lp5523:r";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <6>;
>  		};
>  
> -		chan7 {
> +		chan@7 {
>  			chan-name = "lp5523:kb5";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <7>;
>  		};
>  
> -		chan8 {
> +		chan@8 {
>  			chan-name = "lp5523:kb6";
>  			led-cur = /bits/ 8 <50>;
>  			max-cur = /bits/ 8 <100>;
> +			reg = <8>;
>  		};
>  	};
>  
> -- 
> 2.22.0.214.g8dca754b1e
>