Re: [PATCH 1/6] arm64: dts: rockchip: Fix rk3399-roc-pc pwm2 pin

From: Markus Reichl
Date: Thu Oct 17 2019 - 10:03:45 EST


Hi Jagan,

your patch fixes booting my rk3399-roc-pc with 5.4.0-rc3-next-20191017.
Without your patch roc-pc hangs here:
[ 9.703526] pwm-regulator: supplied by regulator-dummy

Am 16.10.19 um 19:09 schrieb Jagan Teki:
> Hi Levin,
>
> On Tue, Oct 8, 2019 at 8:42 AM <djw@xxxxxxxxxxxxx> wrote:
>>
>> Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> writes:
>>
>> > Hi Heiko,
>> >
>> > On Mon, Sep 30, 2019 at 2:51 AM Heiko Stuebner <heiko@xxxxxxxxx> wrote:
>> >>
>> >> Hi Jagan,
>> >>
>> >> Am Donnerstag, 19. September 2019, 07:28:17 CEST schrieb Jagan Teki:
>> >> > ROC-PC is not able to boot linux console if PWM2_d is
>> >> > unattached to any pinctrl logic.
>> >> >
>> >> > To be precise the linux boot hang with last logs as,
>> >> > ...
>> >> > .....
>> >> > [ 0.003367] Console: colour dummy device 80x25
>> >> > [ 0.003788] printk: console [tty0] enabled
>> >> > [ 0.004178] printk: bootconsole [uart8250] disabled
>> >> >
>> >> > In ROC-PC the PWM2_d pin is connected to LOG_DVS_PWM of
>> >> > VDD_LOG. So, for normal working operations this needs to
>> >> > active and pull-down.
>> >> >
>> >> > This patch fix, by attaching pinctrl active and pull-down
>> >> > the pwm2.
>> >>
>> >> This looks highly dubious on first glance. The pwm subsystem nor
>> >> the Rockchip pwm driver do not do any pinctrl handling.
>> >>
>> >> So I don't really see where that "active" pinctrl state is supposed
>> >> to come from.
>> >>
>> >> Comparing with the pwm driver in the vendor tree I see that there
>> >> is such a state defined there. But that code there also looks strange
>> >> as that driver never again leaves this active state after entering it.
>> >>
>> >> Also for example all the Gru devices run with quite a number of pwm-
>> >> regulators without needing additional fiddling with the pwm itself, so
>> >> I don't really see why that should be different here.
>> >
>> > I deed, I was supposed to think the same. but the vendor kernel dts
>> > from firefly do follow the pwm2 pinctrl [1]. I wouldn't find any
>> > information other than this vensor information, ie one of the reason I
>> > have marked "Levin Du" who initially supported this board.
>> >
>> > One, think I have seen was this pinctrl active fixed the boot hang.
>> > any inputs from would be very helpful.
>> >
>> > Levin Du, any inputs?
>> >
>> > [1] https://github.com/FireflyTeam/kernel/blob/stable-4.4-rk3399-linux/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi#L1184
>> >
>>
>> A grep of the `pwm2` shows that there's such block in rk3399-nanopi4.dtsi:
>>
>> &pwm2 {
>> pinctrl-names = "active";
>> pinctrl-0 = <&pwm2_pin_pull_down>;
>> status = "okay";
>> };
>>
>> But last time I checked, using the mainline U-Boot (the roc-rk3399-pc is
>> in mainline now) with mainline linux v5.2-rc7, no such setting is
>> necessary, and the board boots happily.
>>
>> I cannot find the use of "active" pinctrl state in the
>> `drivers/pwm/pwm-rockchip.c`. If the pinctrl state needs to be setup as
>> default, the `pinctrl-names` needs to be "default" or "init" (see
>> `drivers/base/pinctrl.c`) .
>>
>> Jagan, what version of board do you use? I checked with
>> "ROC-RK3399-PC-V1.0-A 2018-07-12".
>
> I have ROC-RK3399-PC-V1.A 2018.09.25 and powering with TYPE-C0 port.
>
> And here the boot log
>
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> [ 0.000000] Linux version 5.4.0-rc3-next-20191016
> (jagan@jagan-XPS-13-9350) (gcc version 6.3.1 20170109 (Linaro GCC
> 6.3-2017.02)) #1 SMP PREEMPT Wed Oct 16 21:17:23 IST 2019
> [ 0.000000] Machine model: Firefly ROC-RK3399-PC Board
> [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
> [ 0.000000] printk: bootconsole [uart8250] enabled
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] cma: Reserved 32 MiB at 0x000000003e000000
> [ 0.000000] NUMA: No NUMA configuration found
> [ 0.000000] NUMA: Faking a node at [mem
> 0x0000000000200000-0x00000000f7ffffff]
> [ 0.000000] NUMA: NODE_DATA [mem 0xf77ef100-0xf77f0fff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
> [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
> [ 0.000000] psci: probing for conduit method from DT.
> [ 0.000000] psci: PSCIv1.1 detected in firmware.
> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
> [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
> [ 0.000000] psci: SMC Calling Convention v1.1
> [ 0.000000] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
> [ 0.000000] Detected VIPT I-cache on CPU0
> [ 0.000000] CPU features: detected: ARM erratum 845719
> [ 0.000000] CPU features: detected: GIC system register CPU interface
> [ 0.000000] Speculative Store Bypass Disable mitigation not required
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line:
> earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
> [ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
> 4194304 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 262144 (order: 9,
> 2097152 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] software IO TLB: mapped [mem 0x3a000000-0x3e000000] (64MB)
> [ 0.000000] Memory: 3856004K/4061184K available (12028K kernel
> code, 1870K rwdata, 6440K rodata, 5056K init, 451K bss, 172412K
> reserved, 32768K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
> [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
> [ 0.000000] Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> is 25 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
> [ 0.000000] GICv3: 256 SPIs implemented
> [ 0.000000] GICv3: 0 Extended SPIs implemented
> [ 0.000000] GICv3: Distributor has no Range Selector support
> [ 0.000000] GICv3: 16 PPIs implemented
> [ 0.000000] GICv3: no VLPI support, no direct LPI support
> [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
> [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
> [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices
> @f6880000 (flat, esz 8, psz 64K, shr 0)
> [ 0.000000] ITS: using cache flushing for cmd queue
> [ 0.000000] GICv3: using LPI property table @0x00000000f6840000
> [ 0.000000] GIC: using cache flushing for LPI property table
> [ 0.000000] GICv3: CPU0: using allocated LPI pending table
> @0x00000000f6850000
> [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] {
> /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
> [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] {
> /cpus/cpu@100[4] /cpus/cpu@101[5] }
> [ 0.000000] random: get_random_bytes called from
> start_kernel+0x2b8/0x454 with crng_init=0
> [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
> max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps
> every 4398046511097ns
> [ 0.003201] Console: colour dummy device 80x25
> [ 0.003624] printk: console [tty0] enabled
> [ 0.004020] printk: bootconsole [uart8250] disabled

I had to put "console=ttyS2,1500000" in kernel command line to get further logging beyond this point.

>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>

GruÃ,
--
Markus Reichl

Attachment: signature.asc
Description: OpenPGP digital signature