[PATCH v3 7/8] dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller

From: Manish Narani
Date: Thu Oct 17 2019 - 02:22:48 EST


dd documentation for 'xlnx,zynqmp-8.9a' SDHCI controller and optional
properties followed by example.

Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/mmc/arasan,sdhci.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index e0369dd7fb18..c3ee86b819f3 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -15,6 +15,9 @@ Required Properties:
- "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
- "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY
For this device it is strongly suggested to include arasan,soc-ctl-syscon.
+ - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY
+ For this device it is strongly suggested to include clock-output-names and
+ #clock-cells.
- "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
Note: This binding has been deprecated and moved to [5].
- "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY
@@ -62,6 +65,10 @@ Optional Properties:
controller while switching to particular speed mode. If not specified, driver
will configure the default value defined for particular mode in it.

+ - xlnx,mio-bank: When specified, this will indicate the MIO bank number in
+ which the command and data lines are configured. If not specified, driver
+ will assume this as 0.
+
Example:
sdhci@e0100000 {
compatible = "arasan,sdhci-8.9a";
@@ -98,6 +105,18 @@ Example:
#clock-cells = <0>;
};

+ sdhci: mmc@ff160000 {
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 4>;
+ reg = <0x0 0xff160000 0x0 0x1000>;
+ clocks = <&clk200>, <&clk200>;
+ clock-names = "clk_xin", "clk_ahb";
+ clock-output-names = "clk_out_sd0", "clk_in_sd0";
+ #clock-cells = <1>;
+ clk-phase-sd-hs = <63>, <72>;
+ };
+
emmc: sdhci@ec700000 {
compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
reg = <0xec700000 0x300>;
--
2.17.1