Re: New sysfs interface for privacy screens

From: Sean Paul
Date: Mon Oct 07 2019 - 15:53:19 EST


On Mon, Oct 07, 2019 at 12:31:08PM -0700, Rajat Jain wrote:
> On Mon, Oct 7, 2019 at 9:19 AM Mat King <mathewk@xxxxxxxxxx> wrote:
> >
> > On Mon, Oct 7, 2019 at 7:09 AM Sean Paul <seanpaul@xxxxxxxxxxxx> wrote:
> > >
> > > On Thu, Oct 3, 2019 at 3:57 PM Mat King <mathewk@xxxxxxxxxx> wrote:
> > > >
> > > > On Thu, Oct 3, 2019 at 2:59 AM Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
> > > > >
> > > > > On Wed, 02 Oct 2019, Mat King <mathewk@xxxxxxxxxx> wrote:
> > > > > > On Wed, Oct 2, 2019 at 4:46 AM Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
> > > > > >>
> > > > > >> On Wed, 02 Oct 2019, Daniel Thompson <daniel.thompson@xxxxxxxxxx> wrote:
> > > > > >> > On Wed, Oct 02, 2019 at 12:30:05PM +0300, Jani Nikula wrote:
> > > > > >> >> On Tue, 01 Oct 2019, Mat King <mathewk@xxxxxxxxxx> wrote:
> > > > > >> >> > Resending in plain text mode
> > >
> > > /snip
> > >
> > > >
> > > > So my proposal would now be to add a new standard property to
> > > > drm_connector called "privacy_screen" this property would be an enum
> > > > which can take one of three values.
> > > >
> > > > PRIVACY_UNSUPPORTED - Privacy is not available for this connector
> > > > PRIVACY_DISABLED - Privacy is available but turned off
> > > > PRIVACY_ENABLED - Privacy is available and turned on
> > >
> > > Agree with Jani, use the property presence to determine if it's supported
> >
> > That makes sense; just to confirm can a property be added or removed
> > after the connector is registered?
> >
> > >
> > > >
> > > > When the connector is initized the privacy screen property is set to
> > > > PRIVACY_UNSUPPORTED and cannot be changed unless a drm_privacy_screen
> > > > is registered to the connector. drm_privacy_screen will look something
> > > > like
> > > >
> > > > struct drm_privacy_screen_ops {
> > > > int (*get_privacy_state)(struct drm_privacy_screen *);
> > > > int (*set_privacy_state)(struct drm_privacy_screen *, int);
> > > > }
> > > >
> > > > struct drm_privacy_screen {
> > > > /* The privacy screen device */
> > > > struct device *dev;
> > > >
> > > > /* The connector that the privacy screen is attached */
> > > > struct drm_connector *connector;
> > > >
> > > > /* Ops to get and set the privacy screen state */
> > > > struct drm_privacy_screen_ops *ops;
> > > >
> > > > /* The current state of the privacy screen */
> > > > int state;
> > > > }
> > > >
> > > > Privacy screen device drivers will call a function to register the
> > > > privacy screen with the connector.
> > >
> > > Do we actually need dedicated drivers for privacy screen? It seems
> > > like something that is panel-specific hardware, so I'd suggest just
> > > using the panel driver.
> >
> > The privacy screen is physically part of the display but the control
> > interface, at least in all current use cases, is ACPI. Is there a way
> > to control an ACPI device with the panel driver?
>
> I feel that doing it in a dedicated driver has the advantage that if
> we can standardise the control interface, it can be used across
> different panels. So a new panel can be supported using the existing
> driver by merely instantiating the right ACPI HID "privacy screen"
> device as a child device of the parent display / panel device. This
> parent-child relation would also give the kernel the connection needed
> about "which display does this privacy screen attach to". In future,if
> non-x86 platforms need the feature using a different control interface
> (say via a GPIO driver), the privacy screen driver can be updated to
> support that also.


I might be misunderstanding the scope of this, but if everything is controlled
via drm properties, you could just use a helper function to toggle it on/off? We
have helper libraries for a plethora of optional hardware features already.

Sean

>
> Thanks,
>
> Rajat
>
> >
> > >
> > > Sean
> > >
> > > >
> > > > int drm_privacy_screen_register(struct drm_privacy_screen_ops *ops,
> > > > struct device *dev, struct drm_connector *);
> > > >
> > > > Calling this will set a new field on the connector "struct
> > > > drm_privacy_screen *privacy_screen" and change the value of the
> > > > property to ops->get_privacy_state(). When
> > > > drm_mode_connector_set_obj_prop() is called with the
> > > > privacy_screen_proptery if a privacy_screen is registered to the
> > > > connector the ops->set_privacy_state() will be called with the new
> > > > value.
> > > >
> > > > Setting of this property (and all drm properties) is done in user
> > > > space using ioctrl.
> > > >
> > > > Registering the privacy screen with a connector may be tricky because
> > > > the driver for the privacy screen will need to be able to identify
> > > > which connector it belongs to and we will have to deal with connectors
> > > > being added both before and after the privacy screen device is added
> > > > by it's driver.
> > > >
> > > > How does that sound? I will work on a patch if that all sounds about right.
> > > >
> > > > One question I still have is there a way to not accept a value that is
> > > > passed to drm_mode_connector_set_obj_prop()? In this case if a privacy
> > > > screen is not registered the property must stay PRIVACY_UNSUPPORTED
> > > > and if a privacy screen is registered then PRIVACY_UNSUPPORTED must
> > > > never be set.

--
Sean Paul, Software Engineer, Google / Chromium OS