Re: [RFCv1 3/5] arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator to FLASH_VDD

[Anand Moon]

Hi Neil,

On Mon, 7 Oct 2019 at 19:51, Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>
> On 07/10/2019 15:16, Anand Moon wrote:
> > As per schematics add missing VDDAO_3V3 power supply to FLASH_VDD
> > regulator. Also add TFLASH_VDD_EN signal name to gpio pin.
> >
> > Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
> > Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> > Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> > Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > index 66262a6ab3fe..6bd23a1e7e1d 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > @@ -51,9 +51,12 @@
> >               regulator-min-microvolt = <3300000>;
> >               regulator-max-microvolt = <3300000>;
> >
> > +             /* TFLASH_VDD_EN */
> >               gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
> >               enable-active-high;
> >               regulator-always-on;
> > +             /* U18 FC8731-09VF05NRR */
> > +             vin-supply = <&vddao_3v3>;
> >       };
> >
> >       tf_io: gpio-regulator-tf_io {
> >
>
> Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>

Thanks,

Best Regards
-Anand