[PATCH v2 0/7] add Tegra194 XUSB host and pad controller support

From: JC Kuo
Date: Fri Oct 04 2019 - 04:19:50 EST


Hi,

This series introduces support for Tegra194 XUSB host and pad
controller. Tegra194 XUSB host and pad controller are highly
similar to the controllers found on Tegra186. Therefore, it's
possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.

JC Kuo (7):
xhci: tegra: Parameterize mailbox register addresses
usb: host: xhci-tegra: Add Tegra194 XHCI support
phy: tegra: xusb: Protect Tegra186 soc with config
phy: tegra: xusb: Add Tegra194 support
dt-bindings: phy: tegra: Add Tegra194 support
arm64: tegra: Add XUSB and pad controller on Tegra194
arm64: tegra: Enable XUSB host in P2972-0000 board

.../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++
drivers/phy/tegra/Makefile | 1 +
drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++-----
drivers/phy/tegra/xusb.c | 7 +
drivers/phy/tegra/xusb.h | 6 +
drivers/usb/host/xhci-tegra.c | 88 +++++++++--
9 files changed, 448 insertions(+), 51 deletions(-)

--
2.17.1