Re: [PATCH v2 0/4] Enable Hantro G1 post-processor

[Tomasz Figa]

Hi Ezequiel,

On Fri, Oct 4, 2019 at 4:09 AM Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> wrote:
>
> Hi all,
>
> The Hantro G1 VPU post-processor block can be pipelined with
> the decoder hardware, allowing to perform operations such as
> color conversion, scaling, rotation, cropping, among others.
>
> When the post-processor is enabled, the decoder hardware
> gets its own set of NV12 buffers (the native decoder format),
> and the post-processor is the owner of the CAPTURE buffers.
>
> This allows the application get processed
> (scaled, converted, etc) buffers, completely transparently.
>
> This feature is implemented by exposing the post-processed pixel
> formats on ENUM_FMT. When the application sets a pixel format
> other than NV12, and if the post-processor is MC-linked,
> the driver will make use of it, transparently.
>
> On this v2, the media controller API is now required
> to "enable" (aka link, in topology jargon) the post-processor.
> Therefore, applications now have to explicitly request this feature.
>
> For instance, the post-processor is enabled using the media-ctl
> tool:
>
> media-ctl -l "'decoder':1 -> 'rockchip,rk3288-vpu-dec':0[0]"
> media-ctl -l "'postproc':1 -> 'rockchip,rk3288-vpu-dec':0[1]"
>
> v4l2-ctl -d 1 --list-formats
> ioctl: VIDIOC_ENUM_FMT
>         Type: Video Capture Multiplanar
>
>         [0]: 'NV12' (Y/CbCr 4:2:0)
>         [1]: 'YUYV' (YUYV 4:2:2)
>
> Patches 1 and 2 are simply cleanups needed to easier integrate the
> post-processor. Patch 2 is a bit invasive, but it's a step
> forward towards merging the implementation for RK3399 and RK3288.
>
> Patch 3 re-works the media-topology, making the decoder
> a v4l2_subdevice, instead of a bare entity. This allows
> to introduce a more accurate of the decoder+post-processor complex.
>
> Patch 4 introduces the post-processing support.
>
> This is tested on RK3288 platforms with MPEG-2, VP8 and
> H264 streams, decoding to YUY2 surfaces. For now, this series
> is only adding support for NV12-to-YUY2 conversion.
>
> The design and implementation is quite different from v1:
>
> * The decoder->post-processor topology is now exposed
>   explicitly and applications need to configure the pipeline.
>   By default, the decoder is enabled and the post-processor
>   is disabled.
>

First of all, thanks for working on this. While from Chromium point of
view there isn't any practical use case for this feature, it could
possibly be valuable for some other platforms.

I still see a problem with the current design. Mem-to-mem decoders are
commonly used in a multi-instance fashion, but media topology is
global. That means that when having two applications on the system
decoding their own videos, one might be stepping on the other by
changing the topology.

I believe that if we want this to be really usable, we would need to
make the media topology per instance, but that's a significant change
to the media subsystem. Maybe we could pursue the other options I
suggested in the previous revision instead, like ordering the formats
returned by enum_fmt by native first and adding format flags that
would tell the userspace that the format can have some performance
and/or power penalty?

Best regards,
Tomasz