[PATCH 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc

From: Chris Packham
Date: Thu Oct 03 2019 - 21:26:01 EST


This GPIO controller is present on a number of Broadcom switch ASICs
with integrated SoCs. It is similar to the nsp-gpio and iproc-gpio
blocks but different enough to require a separate driver.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
.../bindings/gpio/brcm,xgs-iproc.txt | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt

diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt
new file mode 100644
index 000000000000..328b844c82dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt
@@ -0,0 +1,41 @@
+Broadcom XGS iProc GPIO controller
+
+This controller is the Chip Common A GPIO present on a number of Broadcom
+switch ASICs with integrated SoCs.
+
+Required properties:
+- compatible:
+ Must be "brcm,iproc-gpio-cca"
+
+- reg:
+ The first region defines the base I/O address containing
+ the GPIO controller registers. The second region defines
+ the I/O address containing the Chip Common A interrupt
+ registers.
+
+Optional properties:
+
+- interrupts:
+ The interrupt shared by all GPIO lines for this controller.
+
+- #interrupt-cells:
+ Should be <2>. The first cell is the GPIO number, the second should specify
+ flags.
+
+ See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+- interrupt-controller:
+ Marks the device node as an interrupt controller
+
+Example:
+ gpioa: gpio@18000060 {
+ compatible = "brcm,iproc-gpio-cca";
+ #gpio-cells = <2>;
+ reg = <0x18000060 0x50>,
+ <0x18000000 0x50>;
+ ngpios = <12>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ };
--
2.23.0