[PATCH 4.19 196/211] md/raid6: Set R5_ReadError when there is read failure on parity disk

From: Greg Kroah-Hartman
Date: Thu Oct 03 2019 - 12:24:29 EST


From: Xiao Ni <xni@xxxxxxxxxx>

commit 143f6e733b73051cd22dcb80951c6c929da413ce upstream.

7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.

Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)

V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.

This is Reported-by: kbuild test robot <lkp@xxxxxxxxx>

Fixes: 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <stable@xxxxxxxxxxxxxxx> #4.4+
Signed-off-by: Xiao Ni <xni@xxxxxxxxxx>
Signed-off-by: Song Liu <songliubraving@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/md/raid5.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2573,7 +2573,9 @@ static void raid5_end_read_request(struc
&& !test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
retry = 1;
if (retry)
- if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
+ if (sh->qd_idx >= 0 && sh->pd_idx == i)
+ set_bit(R5_ReadError, &sh->dev[i].flags);
+ else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
set_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
} else