Re: [PATCH v2 2/3] net: phy: at803x: add ar9331 support

[Heiner Kallweit]

On 01.10.2019 08:08, Oleksij Rempel wrote:
> Mostly this hardware can work with generic PHY driver, but this change
> is needed to provided interrupt handling support.
> Tested with dsa ar9331-switch driver.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  drivers/net/phy/at803x.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 7895dbe600ac..42492f83c8d7 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -53,6 +53,7 @@
>  #define AT803X_DEBUG_REG_5			0x05
>  #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
>  
> +#define ATH9331_PHY_ID 0x004dd041
>  #define ATH8030_PHY_ID 0x004dd076
>  #define ATH8031_PHY_ID 0x004dd074
>  #define ATH8035_PHY_ID 0x004dd072
> @@ -403,6 +404,16 @@ static struct phy_driver at803x_driver[] = {
>  	.aneg_done		= at803x_aneg_done,
>  	.ack_interrupt		= &at803x_ack_interrupt,
>  	.config_intr		= &at803x_config_intr,
> +}, {
> +	/* ATHEROS AR9331 */
> +	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
> +	.name			= "Atheros AR9331 built-in PHY",
> +	.config_init		= at803x_config_init,
> +	.suspend		= at803x_suspend,
> +	.resume			= at803x_resume,
> +	/* PHY_BASIC_FEATURES */
> +	.ack_interrupt		= &at803x_ack_interrupt,
> +	.config_intr		= &at803x_config_intr,
>  } };
>  
>  module_phy_driver(at803x_driver);
> 

Reviewed-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>