[PATCH AUTOSEL 4.19 026/167] ARM: davinci: dm365: define gpio interrupts as separate resources

From: Sasha Levin
Date: Tue Sep 03 2019 - 12:38:50 EST


From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

[ Upstream commit 193c04374e281a56c7d4f96e66d329671945bebe ]

Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.

Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/mach-davinci/dm365.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index abcf2a5ed89b5..42665914166a3 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -267,6 +267,41 @@ static struct resource dm365_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_DM365_GPIO0,
+ .end = IRQ_DM365_GPIO0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO1,
+ .end = IRQ_DM365_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO2,
+ .end = IRQ_DM365_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO3,
+ .end = IRQ_DM365_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO4,
+ .end = IRQ_DM365_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO5,
+ .end = IRQ_DM365_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO6,
+ .end = IRQ_DM365_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO7,
.end = IRQ_DM365_GPIO7,
.flags = IORESOURCE_IRQ,
},
--
2.20.1