Re: [RESEND, PATCH v13 06/12] soc: mediatek: cmdq: clear the event in cmdq initial flow

[Matthias Brugger]

On 20/08/2019 10:49, Bibby Hsieh wrote:
> GCE hardware stored event information in own internal sysram,
> if the initial value in those sysram is not zero value
> it will cause a situation that gce can wait the event immediately
> after client ask gce to wait event but not really trigger the
> corresponding hardware.
> 
> In order to make sure that the wait event function is
> exactly correct, we need to clear the sysram value in
> cmdq initial flow.
> 
> Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
> Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>

Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>

> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
>  include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 69daaadc3a5f..9a6ce9f5a7db 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -21,6 +21,7 @@
>  #define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
>  
>  #define CMDQ_CURR_IRQ_STATUS		0x10
> +#define CMDQ_SYNC_TOKEN_UPDATE		0x68
>  #define CMDQ_THR_SLOT_CYCLES		0x30
>  #define CMDQ_THR_BASE			0x100
>  #define CMDQ_THR_SIZE			0x80
> @@ -104,8 +105,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
>  
>  static void cmdq_init(struct cmdq *cmdq)
>  {
> +	int i;
> +
>  	WARN_ON(clk_enable(cmdq->clock) < 0);
>  	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> +	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
> +		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
>  	clk_disable(cmdq->clock);
>  }
>  
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index ccb73422c2fa..911475da7a53 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
>  #define CMDQ_WFE_UPDATE			BIT(31)
>  #define CMDQ_WFE_WAIT			BIT(15)
>  #define CMDQ_WFE_WAIT_VALUE		0x1
> +/** cmdq event maximum */
> +#define CMDQ_MAX_EVENT			0x3ff
>  
>  /*
>   * CMDQ_CODE_MASK:
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 54ade13a9b15..4e8899972db4 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -13,9 +13,6 @@
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
>  
> -/** cmdq event maximum */
> -#define CMDQ_MAX_EVENT				0x3ff
> -
>  struct cmdq_pkt;
>  
>  struct cmdq_client {
>