Re: [PATCH 04/19] dt-bindings: phy-mmp3-usb: Add bindings

[Rob Herring]

On Fri, Aug 09, 2019 at 11:31:43AM +0200, Lubomir Rintel wrote:
> This is the PHY chip for USB OTG on MMP3 platform.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> ---
>  .../devicetree/bindings/phy/phy-mmp3-usb.txt     | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
> new file mode 100644
> index 0000000000000..b9623b98151bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
> @@ -0,0 +1,16 @@
> +Marvell MMP3 USB PHY
> +--------------------
> +
> +Required properties:
> +- compatible: must be "marvell,mmp3-usb-phy"
> +- #phy-cells: must be 0
> +
> +Example:
> +	usb-phy: usbphy@d4207000 {

usb-phy@...

> +		compatible = "marvell,mmp3-usb-phy";
> +		reg = <0xd4207000 0x40>;
> +		#phy-cells = <0>;
> +	};
> +
> +This document explains the device tree binding. For general information
> +about PHY subsystem refer to Documentation/phy.txt

Drop this statement.


> -- 
> 2.21.0
>