[PATCH v5 0/4] net: phy: Add support for DT configuration of PHY LEDs and use it for RTL8211E

From: Matthias Kaehlcke
Date: Wed Aug 07 2019 - 13:05:15 EST


This series adds a generic binding to configure PHY LEDs through
the device tree, and phylib support for reading the information
from the DT. PHY drivers that support the generic binding should
implement the new hook .config_led.

Enable DT configuration of the RTL8211E LEDs by implementing the
.config_led hook of the driver. Certain registers of the RTL8211E
can only be accessed through a vendor specific extended page
mechanism. Extended pages need to be accessed for the LED
configuration. This series adds helpers to facilitate accessing
extended pages.

(subject updated, was "net: phy: realtek: Enable configuration
of RTL8211E LEDs")

Matthias Kaehlcke (4):
dt-bindings: net: phy: Add subnode for LED configuration
net: phy: Add support for generic LED configuration through the DT
net: phy: realtek: Add helpers for accessing RTL8211x extension pages
net: phy: realtek: Add LED configuration support for RTL8211E

.../devicetree/bindings/net/ethernet-phy.yaml | 59 +++++++
drivers/net/phy/phy_device.c | 72 +++++++++
drivers/net/phy/realtek.c | 148 ++++++++++++++++--
include/linux/phy.h | 22 +++
4 files changed, 286 insertions(+), 15 deletions(-)

--
2.22.0.770.g0f2c4a37fd-goog