Re: [PATCH V13 12/12] PCI: tegra: Add Tegra194 PCIe support

From: Lorenzo Pieralisi
Date: Mon Aug 05 2019 - 10:01:35 EST

Next message: Gerd Hoffmann: "[PATCH v6 06/17] drm/nouveau: use embedded gem object"
Previous message: Gerd Hoffmann: "[PATCH v6 17/17] drm/ttm: drop ttm_buffer_object->resv"
In reply to: Vidya Sagar: "Re: [PATCH V13 12/12] PCI: tegra: Add Tegra194 PCIe support"
Next in thread: Vidya Sagar: "Re: [PATCH V13 12/12] PCI: tegra: Add Tegra194 PCIe support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Aug 02, 2019 at 05:36:43PM +0530, Vidya Sagar wrote:
> On 7/30/2019 9:19 PM, Lorenzo Pieralisi wrote:
> > On Tue, Jul 23, 2019 at 08:14:08PM +0530, Vidya Sagar wrote:
> > > On 7/16/2019 4:52 PM, Lorenzo Pieralisi wrote:
> > > > On Sat, Jul 13, 2019 at 12:34:34PM +0530, Vidya Sagar wrote:
> > > >
> > > > [...]
> > > >
> > > > > > > > > +static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
> > > > > > > > > + bool enable)
> > > > > > > > > +{
> > > > > > > > > + struct mrq_uphy_response resp;
> > > > > > > > > + struct tegra_bpmp_message msg;
> > > > > > > > > + struct mrq_uphy_request req;
> > > > > > > > > + int err;
> > > > > > > > > +
> > > > > > > > > + if (pcie->cid == 5)
> > > > > > > > > + return 0;
> > > > > > > >
> > > > > > > > What's wrong with cid == 5 ? Explain please.
> > > > > > > Controller with ID=5 doesn't need any programming to enable it which is
> > > > > > > done here through calling firmware API.
> > > > > > >
> > > > > > > >
> > > > > > > > > + memset(&req, 0, sizeof(req));
> > > > > > > > > + memset(&resp, 0, sizeof(resp));
> > > > > > > > > +
> > > > > > > > > + req.cmd = CMD_UPHY_PCIE_CONTROLLER_STATE;
> > > > > > > > > + req.controller_state.pcie_controller = pcie->cid;
> > > > > > > > > + req.controller_state.enable = enable;
> > > > > > > > > +
> > > > > > > > > + memset(&msg, 0, sizeof(msg));
> > > > > > > > > + msg.mrq = MRQ_UPHY;
> > > > > > > > > + msg.tx.data = &req;
> > > > > > > > > + msg.tx.size = sizeof(req);
> > > > > > > > > + msg.rx.data = &resp;
> > > > > > > > > + msg.rx.size = sizeof(resp);
> > > > > > > > > +
> > > > > > > > > + if (irqs_disabled())
> > > > > > > >
> > > > > > > > Can you explain to me what this check is meant to achieve please ?
> > > > > > > Firmware interface provides different APIs to be called when there are
> > > > > > > no interrupts enabled in the system (noirq context) and otherwise
> > > > > > > hence checking that situation here and calling appropriate API.
> > > > > >
> > > > > > That's what I am questioning. Being called from {suspend/resume}_noirq()
> > > > > > callbacks (if that's the code path this check caters for) does not mean
> > > > > > irqs_disabled() == true.
> > > > > Agree.
> > > > > Actually, I got a hint of having this check from the following.
> > > > > Both tegra_bpmp_transfer_atomic() and tegra_bpmp_transfer() are indirectly
> > > > > called by APIs registered with .master_xfer() and .master_xfer_atomic() hooks of
> > > > > struct i2c_algorithm and the decision to call which one of these is made using the
> > > > > following check in i2c-core.h file.
> > > > > static inline bool i2c_in_atomic_xfer_mode(void)
> > > > > {
> > > > > return system_state > SYSTEM_RUNNING && irqs_disabled();
> > > > > }
> > > > > I think I should use this condition as is IIUC.
> > > > > Please let me know if there are any concerns with this.
> > > >
> > > > It is not a concern, it is just that I don't understand how this code
> > > > can be called with IRQs disabled, if you can give me an execution path I
> > > > am happy to leave the check there. On top of that, when called from
> > > > suspend NOIRQ context, it is likely to use the blocking API (because
> > > > IRQs aren't disabled at CPU level) behind which there is most certainly
> > > > an IRQ required to wake the thread up and if the IRQ in question was
> > > > disabled in the suspend NOIRQ phase this code is likely to deadlock.
> > > >
> > > > I want to make sure we can justify adding this check, I do not
> > > > want to add it because we think it can be needed when it may not
> > > > be needed at all (and it gets copy and pasted over and over again
> > > > in other drivers).
> > > I had a discussion internally about this and the prescribed usage of these APIs
> > > seem to be that
> > > use tegra_bpmp_transfer() in .probe() and other paths where interrupts are
> > > enabled as this API needs interrupts to be enabled for its working.
> > > Use tegra_bpmp_transfer_atomic() surrounded by local_irq_save()/local_irq_restore()
> > > in other paths where interrupt servicing is disabled.
> >
> > Why tegra_bpmp_transfer_atomic() needs IRQs to be disabled ? And why
> > is it needed in this piece of code where IRQs are _never_ disabled
> > at CPU level ?
> >
> > IRQs are enabled when you call a suspend_noirq() callback, so the
> > blocking API can be used as long as the IRQ descriptor backing
> > the IRQ that will wake-up the blocked call is marked as
> > IRQF_NO_SUSPEND.
> >
> > The problem is not IRQs enabled/disabled at CPU level, the problem is
> > the IRQ descriptor of the IRQ required to handle the blocking BPMP call,
> > mark it as IRQF_NO_SUSPEND and remove the tegra_bpmp_transfer_atomic()
> > call from this code (or please give me a concrete example pinpointing
> > why it is needed).
> Ideally, using tegra_bpmp_transfer() alone in all paths (.probe() as
> well as .resume_noirq()) should have worked as the corresponding IRQ
> is already flagged as IRQF_NO_SUSPEND, but, because of the way BPMP-FW
> driver in kernel making its interface available through
> .resume_early(), tegra_bpmp_transfer() wasn't working as expected and
> I pushed a patch (CC'ing you) at
> http://patchwork.ozlabs.org/patch/1140973/ to make it .resume_noirq()
> from .resume_early(). With that in place, we can just use
> tegra_bpmp_trasnfer(). I'll push a new patch with this change once my
> BPMP-FW driver patch is approved.

Does this leave you with a resume_noirq() callbacks ordering issue to
sort out ?

a.k.a How will you guarantee that the BPMP will resume before the host
bridge ?

Thanks,
Lorenzo

> Thanks,
> Vidya Sagar
> >
> > Thanks,
> > Lorenzo
> >
> > > I'll go ahead and make next patch series with this if this looks fine to you.
> > >
> > > >
> > > > > > Actually, if tegra_bpmp_transfer() requires IRQs to be enabled you may
> > > > > > even end up in a situation where that blocking call does not wake up
> > > > > > because the IRQ in question was disabled in the NOIRQ suspend/resume
> > > > > > phase.
> > > > > >
> > > > > > [...]
> > > > > >
> > > > > > > > > +static int tegra_pcie_dw_probe(struct platform_device *pdev)
> > > > > > > > > +{
> > > > > > > > > + const struct tegra_pcie_soc *data;
> > > > > > > > > + struct device *dev = &pdev->dev;
> > > > > > > > > + struct resource *atu_dma_res;
> > > > > > > > > + struct tegra_pcie_dw *pcie;
> > > > > > > > > + struct resource *dbi_res;
> > > > > > > > > + struct pcie_port *pp;
> > > > > > > > > + struct dw_pcie *pci;
> > > > > > > > > + struct phy **phys;
> > > > > > > > > + char *name;
> > > > > > > > > + int ret;
> > > > > > > > > + u32 i;
> > > > > > > > > +
> > > > > > > > > + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > > > > > > > > + if (!pcie)
> > > > > > > > > + return -ENOMEM;
> > > > > > > > > +
> > > > > > > > > + pci = &pcie->pci;
> > > > > > > > > + pci->dev = &pdev->dev;
> > > > > > > > > + pci->ops = &tegra_dw_pcie_ops;
> > > > > > > > > + pp = &pci->pp;
> > > > > > > > > + pcie->dev = &pdev->dev;
> > > > > > > > > +
> > > > > > > > > + data = (struct tegra_pcie_soc *)of_device_get_match_data(dev);
> > > > > > > > > + if (!data)
> > > > > > > > > + return -EINVAL;
> > > > > > > > > + pcie->mode = (enum dw_pcie_device_mode)data->mode;
> > > > > > > > > +
> > > > > > > > > + ret = tegra_pcie_dw_parse_dt(pcie);
> > > > > > > > > + if (ret < 0) {
> > > > > > > > > + dev_err(dev, "Failed to parse device tree: %d\n", ret);
> > > > > > > > > + return ret;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl");
> > > > > > > > > + if (IS_ERR(pcie->pex_ctl_supply)) {
> > > > > > > > > + dev_err(dev, "Failed to get regulator: %ld\n",
> > > > > > > > > + PTR_ERR(pcie->pex_ctl_supply));
> > > > > > > > > + return PTR_ERR(pcie->pex_ctl_supply);
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + pcie->core_clk = devm_clk_get(dev, "core");
> > > > > > > > > + if (IS_ERR(pcie->core_clk)) {
> > > > > > > > > + dev_err(dev, "Failed to get core clock: %ld\n",
> > > > > > > > > + PTR_ERR(pcie->core_clk));
> > > > > > > > > + return PTR_ERR(pcie->core_clk);
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + pcie->appl_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > > > > > > > + "appl");
> > > > > > > > > + if (!pcie->appl_res) {
> > > > > > > > > + dev_err(dev, "Failed to find \"appl\" region\n");
> > > > > > > > > + return PTR_ERR(pcie->appl_res);
> > > > > > > > > + }
> > > > > > > > > + pcie->appl_base = devm_ioremap_resource(dev, pcie->appl_res);
> > > > > > > > > + if (IS_ERR(pcie->appl_base))
> > > > > > > > > + return PTR_ERR(pcie->appl_base);
> > > > > > > > > +
> > > > > > > > > + pcie->core_apb_rst = devm_reset_control_get(dev, "apb");
> > > > > > > > > + if (IS_ERR(pcie->core_apb_rst)) {
> > > > > > > > > + dev_err(dev, "Failed to get APB reset: %ld\n",
> > > > > > > > > + PTR_ERR(pcie->core_apb_rst));
> > > > > > > > > + return PTR_ERR(pcie->core_apb_rst);
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + phys = devm_kcalloc(dev, pcie->phy_count, sizeof(*phys), GFP_KERNEL);
> > > > > > > > > + if (!phys)
> > > > > > > > > + return PTR_ERR(phys);
> > > > > > > > > +
> > > > > > > > > + for (i = 0; i < pcie->phy_count; i++) {
> > > > > > > > > + name = kasprintf(GFP_KERNEL, "p2u-%u", i);
> > > > > > > > > + if (!name) {
> > > > > > > > > + dev_err(dev, "Failed to create P2U string\n");
> > > > > > > > > + return -ENOMEM;
> > > > > > > > > + }
> > > > > > > > > + phys[i] = devm_phy_get(dev, name);
> > > > > > > > > + kfree(name);
> > > > > > > > > + if (IS_ERR(phys[i])) {
> > > > > > > > > + ret = PTR_ERR(phys[i]);
> > > > > > > > > + dev_err(dev, "Failed to get PHY: %d\n", ret);
> > > > > > > > > + return ret;
> > > > > > > > > + }
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + pcie->phys = phys;
> > > > > > > > > +
> > > > > > > > > + dbi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
> > > > > > > > > + if (!dbi_res) {
> > > > > > > > > + dev_err(dev, "Failed to find \"dbi\" region\n");
> > > > > > > > > + return PTR_ERR(dbi_res);
> > > > > > > > > + }
> > > > > > > > > + pcie->dbi_res = dbi_res;
> > > > > > > > > +
> > > > > > > > > + pci->dbi_base = devm_ioremap_resource(dev, dbi_res);
> > > > > > > > > + if (IS_ERR(pci->dbi_base))
> > > > > > > > > + return PTR_ERR(pci->dbi_base);
> > > > > > > > > +
> > > > > > > > > + /* Tegra HW locates DBI2 at a fixed offset from DBI */
> > > > > > > > > + pci->dbi_base2 = pci->dbi_base + 0x1000;
> > > > > > > > > +
> > > > > > > > > + atu_dma_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > > > > > > > + "atu_dma");
> > > > > > > > > + if (!atu_dma_res) {
> > > > > > > > > + dev_err(dev, "Failed to find \"atu_dma\" region\n");
> > > > > > > > > + return PTR_ERR(atu_dma_res);
> > > > > > > > > + }
> > > > > > > > > + pcie->atu_dma_res = atu_dma_res;
> > > > > > > > > + pci->atu_base = devm_ioremap_resource(dev, atu_dma_res);
> > > > > > > > > + if (IS_ERR(pci->atu_base))
> > > > > > > > > + return PTR_ERR(pci->atu_base);
> > > > > > > > > +
> > > > > > > > > + pcie->core_rst = devm_reset_control_get(dev, "core");
> > > > > > > > > + if (IS_ERR(pcie->core_rst)) {
> > > > > > > > > + dev_err(dev, "Failed to get core reset: %ld\n",
> > > > > > > > > + PTR_ERR(pcie->core_rst));
> > > > > > > > > + return PTR_ERR(pcie->core_rst);
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + pp->irq = platform_get_irq_byname(pdev, "intr");
> > > > > > > > > + if (!pp->irq) {
> > > > > > > > > + dev_err(dev, "Failed to get \"intr\" interrupt\n");
> > > > > > > > > + return -ENODEV;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + ret = devm_request_irq(dev, pp->irq, tegra_pcie_irq_handler,
> > > > > > > > > + IRQF_SHARED, "tegra-pcie-intr", pcie);
> > > > > > > > > + if (ret) {
> > > > > > > > > + dev_err(dev, "Failed to request IRQ %d: %d\n", pp->irq, ret);
> > > > > > > > > + return ret;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + pcie->bpmp = tegra_bpmp_get(dev);
> > > > > > > > > + if (IS_ERR(pcie->bpmp))
> > > > > > > > > + return PTR_ERR(pcie->bpmp);
> > > > > > > > > +
> > > > > > > > > + platform_set_drvdata(pdev, pcie);
> > > > > > > > > +
> > > > > > > > > + if (pcie->mode == DW_PCIE_RC_TYPE) {
> > > > > > > > > + ret = tegra_pcie_config_rp(pcie);
> > > > > > > > > + if (ret && ret != -ENOMEDIUM)
> > > > > > > > > + goto fail;
> > > > > > > > > + else
> > > > > > > > > + return 0;
> > > > > > > >
> > > > > > > > So if the link is not up we still go ahead and make probe
> > > > > > > > succeed. What for ?
> > > > > > > We may need root port to be available to support hot-plugging of
> > > > > > > endpoint devices, so, we don't fail the probe.
> > > > > >
> > > > > > We need it or we don't. If you do support hotplugging of endpoint
> > > > > > devices point me at the code, otherwise link up failure means
> > > > > > failure to probe.
> > > > > Currently hotplugging of endpoint is not supported, but it is one of
> > > > > the use cases that we may add support for in future.
> > > >
> > > > You should elaborate on this, I do not understand what you mean,
> > > > either the root port(s) supports hotplug or it does not.
> > > >
> > > > > But, why should we fail probe if link up doesn't happen? As such,
> > > > > nothing went wrong in terms of root port initialization right? I
> > > > > checked other DWC based implementations and following are not failing
> > > > > the probe pci-dra7xx.c, pcie-armada8k.c, pcie-artpec6.c, pcie-histb.c,
> > > > > pcie-kirin.c, pcie-spear13xx.c, pci-exynos.c, pci-imx6.c,
> > > > > pci-keystone.c, pci-layerscape.c
> > > > >
> > > > > Although following do fail the probe if link is not up. pcie-qcom.c,
> > > > > pcie-uniphier.c, pci-meson.c
> > > > >
> > > > > So, to me, it looks more like a choice we can make whether to fail the
> > > > > probe or not and in this case we are choosing not to fail.
> > > >
> > > > I disagree. I had an offline chat with Bjorn and whether link-up should
> > > > fail the probe or not depends on whether the root port(s) is hotplug
> > > > capable or not and this in turn relies on the root port "Slot
> > > > implemented" bit in the PCI Express capabilities register.
> > > >
> > > > It is a choice but it should be based on evidence.
> > > >
> > > > Lorenzo
> > > With Bjorn's latest comment on top of this, I think we are good not to fail
> > > the probe here.
> > >
> > > - Vidya Sagar
> > > >
> > >
>

Next message: Gerd Hoffmann: "[PATCH v6 06/17] drm/nouveau: use embedded gem object"
Previous message: Gerd Hoffmann: "[PATCH v6 17/17] drm/ttm: drop ttm_buffer_object->resv"
In reply to: Vidya Sagar: "Re: [PATCH V13 12/12] PCI: tegra: Add Tegra194 PCIe support"
Next in thread: Vidya Sagar: "Re: [PATCH V13 12/12] PCI: tegra: Add Tegra194 PCIe support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]