Re: [PATCH v3 1/2] usbip: Skip DMA mapping and unmapping for urb at vhci

[Suwan Kim]

On Fri, Aug 02, 2019 at 04:22:27PM -0600, shuah wrote:
> On 8/2/19 11:36 AM, Suwan Kim wrote:
> > vhci doesnât do DMA for remote device. Actually, the real DMA
> > operation is done by network card driver. vhci just passes virtual
> > address of the buffer to the network stack, so vhci doesnât use and
> > need dma address of the buffer of the URB.
> > 
> > But HCD provides DMA mapping and unmapping function by default.
> > Moreover, it causes unnecessary DMA mapping and unmapping which
> > will be done again at the NIC driver and it wastes CPU cycles.
> > So, implement map_urb_for_dma and unmap_urb_for_dma function for
> > vhci in order to skip the DMA mapping and unmapping procedure.
> > 
> > When it comes to supporting SG for vhci, it is useful to use native
> > SG list (urb->num_sgs) instead of mapped SG list because DMA mapping
> > fnuction can adjust the number of SG list (urb->num_mapped_sgs).
> > And vhci_map_urb_for_dma() prevents isoc pipe from using SG as
> > hcd_map_urb_for_dma() does.
> > 
> > Signed-off-by: Suwan Kim <suwan.kim027@xxxxxxxxx>
> > ---
> >   drivers/usb/usbip/vhci_hcd.c | 19 +++++++++++++++++++
> >   1 file changed, 19 insertions(+)
> > 
> > diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
> > index 000ab7225717..c62f7fa8118c 100644
> > --- a/drivers/usb/usbip/vhci_hcd.c
> > +++ b/drivers/usb/usbip/vhci_hcd.c
> > @@ -1288,6 +1288,22 @@ static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
> >   	return 0;
> >   }
> > +static int vhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
> > +		gfp_t mem_flags)
> > +{
> > +	if (usb_endpoint_xfer_isoc(&urb->ep->desc) && urb->num_sgs) {
> > +		WARN_ON(1);
> 
> Don't add WARN_ON. I cleaned them all up recently and don't want new
> ones added.

Ok. I will remove it and resend v4.

Regards
Suwan Kim