[PATCH v1 1/2] dt-binding: spi: add NPCM FIU controller

From: Tomer Maimon
Date: Thu Aug 01 2019 - 10:05:17 EST


Added device tree binding documentation for Nuvoton BMC
NPCM Flash Interface Unit(FIU) SPI master controller
using SPI-MEM interface.

Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
---
.../bindings/spi/nuvoton,npcm-fiu.txt | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt

diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
new file mode 100644
index 000000000000..ab37aae91d19
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
@@ -0,0 +1,47 @@
+* Nuvoton FLASH Interface Unit (FIU) SPI Controller
+
+NPCM FIU supports single, dual and quad communication interface.
+
+The NPCM7XX supports three FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU3 support four chip select.
+
+Required properties:
+ - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC
+ - #address-cells : should be 1.
+ - #size-cells : should be 0.
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "control" and "memory"
+ - clocks : phandle of FIU reference clock.
+
+Required properties in case the pins can be muxed:
+ - pinctrl-names : a pinctrl state named "default" must be defined.
+ - pinctrl-0 : phandle referencing pin configuration of the device.
+
+Optional property:
+ - spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD.
+
+Aliases:
+- All the FIU controller nodes should be represented in the aliases node using
+ the following format 'fiu{n}' where n is a unique number for the alias.
+ In the NPCM7XX BMC:
+ fiu0 represent fiu 0 controller
+ fiu1 represent fiu 3 controller
+ fiu2 represent fiu x controller
+
+Example:
+fiu3: fiu@c00000000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_AHB>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+ spi-nor@0 {
+ ...
+ };
+};
+
--
2.18.0