Re: [PATCH v6 2/2] dt-bindings: mtd: Document Macronix raw NAND controller bindings

[Miquel Raynal]

Hi Mason,

Mason Yang <masonccyang@xxxxxxxxxxx> wrote on Thu,  1 Aug 2019 11:55:10
+0800:

> Document the bindings used by the Macronix raw NAND controller.
> 
> Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mtd/mxic-nand.txt | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
> new file mode 100644
> index 0000000..de37d60
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
> @@ -0,0 +1,19 @@
> +Macronix Raw NAND Controller Device Tree Bindings
> +-------------------------------------------------
> +
> +Required properties:
> +- compatible: should be "mxicy,multi-itfc-v009-nand-morph"
> +- reg: should contain 1 entry for the registers
> +- interrupts: interrupt line connected to this raw NAND controller
> +- clock-names: should contain "ps", "send" and "send_dly"
> +- clocks: should contain 3 phandles for the "ps", "send" and
> +	 "send_dly" clocks
> +
> +Example:
> +
> +	nand: nand-controller@43c30000 {
> +		compatible = "mxicy,multi-itfc-v009-nand-morph";

"mxicy" looks strange to me, I know it has been used in the past and
cannot be removed, but I don't think it is wise to continue using it
while your use "mxic" in all your other contributions. I would update
the prefix to mxic here and fill-in the relevant doc.

Also, what is nand-morph? I thought we were okay for
the "-nand-controller" suffix.


Thanks,
MiquÃl