Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8

From: Tony Lindgren
Date: Wed Jul 24 2019 - 02:48:06 EST


* Suman Anna <s-anna@xxxxxx> [190723 21:02]:
> Hi Tony,
>
> On 7/23/19 6:28 AM, Tony Lindgren wrote:
> > The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7.
> > Otherwise we get the following warning on beagle-x15:
...
> > @@ -2962,9 +2958,8 @@
> > <SYSC_IDLE_SMART>;
> > /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
> > clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
> > - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
> > - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
> > - clock-names = "fck", "ahclkx", "ahclkr";
> > + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
> > + clock-names = "fck", "ahclkx";
>
> The equivalent change to MCASP8 is missing.

Thanks for spotting it, probably should be set up the same way as
MCASP4 too looking at the TRM.

Tero, care to check the dra7 mcasp clocks we have defined?

$ grep MCASP drivers/clk/ti/clk-7xx.c
{ DRA7_IPU_MCASP1_CLKCTRL, dra7_mcasp1_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0000:22" },
{ DRA7_L4PER2_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0154:22" },
{ DRA7_L4PER2_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:015c:22" },
{ DRA7_L4PER2_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:016c:22" },
{ DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:24" },
{ DRA7_L4PER2_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:018c:22" },
{ DRA7_L4PER2_MCASP6_CLKCTRL, dra7_mcasp6_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01f8:22" },
{ DRA7_L4PER2_MCASP7_CLKCTRL, dra7_mcasp7_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01fc:22" },

Is bit 24 above correct for MCASP8 or should it too be 22 like
adjacent MCASP4 in the TRM?

Regards,

Tony