Re: [PATCH v10 03/12] dt-binding: gce: add binding for gce client reg property

From: Bibby Hsieh
Date: Wed Jul 10 2019 - 02:39:26 EST


Hi, Rob,

Sorry to bother you, could you please review this patch when you are
available? Thanks.


On Mon, 2019-07-01 at 15:48 +0800, Bibby Hsieh wrote:
> cmdq driver provide a function that get the relationship
> of sub system number from device node for client.
> add specification for #subsys-cells, mediatek,gce-client-reg.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/mailbox/mtk-gce.txt | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 1f7f8f2a3f49..d48282d6b02d 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -21,12 +21,21 @@ Required properties:
> priority: Priority of GCE thread.
> atomic_exec: GCE processing continuous packets of commands in atomic
> way.
> +- #subsys-cells: Should be 3.
> + <&phandle subsys_number start_offset size>
> + phandle: Label name of a gce node.
> + subsys_number: specify the sub-system id which is corresponding
> + to the register address.
> + start_offset: the start offset of register address that GCE can access.
> + size: the total size of register address that GCE can access.
>
> Required properties for a client device:
> - mboxes: Client use mailbox to communicate with GCE, it should have this
> property and list of phandle, mailbox specifiers.
> -- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
> - to the register address.
> +Optional properties for a client device:
> +- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
> + to the register address, it should have this property and list of phandle,
> + sub-system specifiers.
>
> Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
> or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
> @@ -40,6 +49,7 @@ Example:
> clocks = <&infracfg CLK_INFRA_GCE>;
> clock-names = "gce";
> #mbox-cells = <3>;
> + #subsys-cells = <3>;
> };
>
> Example for a client device:
> @@ -48,9 +58,9 @@ Example for a client device:
> compatible = "mediatek,mt8173-mmsys";
> mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
> <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
> - mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
> CMDQ_EVENT_MUTEX1_STREAM_EOF>;
> -
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
> + <&gce SUBSYS_1401XXXX 0x2000 0x100>;
> ...
> };

--
Bibby