Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Shenhar, Talel]

Marc, should I publish those fixes as new patch that updates the 
dt-bindings or new patchset to this list?

On 7/9/2019 5:23 AM, Rob Herring wrote:
> On Mon, Jun 10, 2019 at 11:34:42AM +0300, Talel Shenhar wrote:
> > +- #interrupt-cells: must be 2.
> > +  First cell defines the index of the interrupt within the controller.
> > +  Second cell is used to specify the trigger type and must be one of the
> > +  following:
> > +    - bits[3:0] trigger type and level flags
> > +	1 = low-to-high edge triggered
> > +	4 = active high level-sensitive
> No need to define this here. Reference the standard definition.

This device only support those two modes.

This definition tries to capture the supported modes.

Should I just state that those two modes are supported and then avoid 
the actual bits and values?

> > +- interrupt-parent: specifies the parent interrupt controller.
> Drop this. It is implied and could be in the parent.
ack
> > +- interrupts: describes which input line in the interrupt parent, this
> > +  fic's output is connected to. This field property depends on the parent's
> > +  binding
> > +
> > +Example:
> > +
> > +amazon_fic: interrupt-controller@0xfd8a8500 {
> Drop the '0x'
ack