[PATCH v2 01/10] net: hisilicon: Add support for HI13X1 to hip04_eth

From: Jiangfeng Xiao
Date: Mon Jul 08 2019 - 23:32:27 EST


Extend the hip04_eth driver to support HI13X1_GMAC.
Enable it with CONFIG_HI13X1_GMAC option.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@xxxxxxxxxx>
---
drivers/net/ethernet/hisilicon/Kconfig | 10 ++++++++
drivers/net/ethernet/hisilicon/hip04_eth.c | 37 ++++++++++++++++++++++++------
2 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index a0d780c..3892a20 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -46,6 +46,16 @@ config HIP04_ETH
If you wish to compile a kernel for a hardware with hisilicon p04 SoC and
want to use the internal ethernet then you should answer Y to this.

+config HI13X1_GMAC
+ bool "Hisilicon HI13X1 Network Device Support"
+ depends on HIP04_ETH
+ help
+ If you wish to compile a kernel for a hardware with hisilicon hi13x1_gamc
+ then you should answer Y to this. This makes this driver suitable for use
+ on certain boards such as the HI13X1.
+
+ If you are unsure, say N.
+
config HNS_MDIO
tristate
select PHYLIB
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index e1f2978..2b5112b 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -33,10 +33,23 @@
#define GE_MODE_CHANGE_REG 0x1b4
#define GE_RECV_CONTROL_REG 0x1e0
#define GE_STATION_MAC_ADDRESS 0x210
-#define PPE_CFG_CPU_ADD_ADDR 0x580
-#define PPE_CFG_MAX_FRAME_LEN_REG 0x408
+
#define PPE_CFG_BUS_CTRL_REG 0x424
#define PPE_CFG_RX_CTRL_REG 0x428
+
+#if defined(CONFIG_HI13X1_GMAC)
+#define PPE_CFG_CPU_ADD_ADDR 0x6D0
+#define PPE_CFG_MAX_FRAME_LEN_REG 0x500
+#define PPE_CFG_RX_PKT_MODE_REG 0x504
+#define PPE_CFG_QOS_VMID_GEN 0x520
+#define PPE_CFG_RX_PKT_INT 0x740
+#define PPE_INTEN 0x700
+#define PPE_INTSTS 0x708
+#define PPE_RINT 0x704
+#define PPE_CFG_STS_MODE 0x880
+#else
+#define PPE_CFG_CPU_ADD_ADDR 0x580
+#define PPE_CFG_MAX_FRAME_LEN_REG 0x408
#define PPE_CFG_RX_PKT_MODE_REG 0x438
#define PPE_CFG_QOS_VMID_GEN 0x500
#define PPE_CFG_RX_PKT_INT 0x538
@@ -44,6 +57,8 @@
#define PPE_INTSTS 0x608
#define PPE_RINT 0x604
#define PPE_CFG_STS_MODE 0x700
+#endif /* CONFIG_HI13X1_GMAC */
+
#define PPE_HIS_RX_PKT_CNT 0x804

/* REG_INTERRUPT */
@@ -93,18 +108,26 @@
#define GE_RX_PORT_EN BIT(1)
#define GE_TX_PORT_EN BIT(2)

-#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(12)
-
#define PPE_CFG_RX_PKT_ALIGN BIT(18)
-#define PPE_CFG_QOS_VMID_MODE BIT(14)
+
+#if defined(CONFIG_HI13X1_GMAC)
+#define PPE_CFG_QOS_VMID_GRP_SHIFT 4
+#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 7
+#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(0)
+#define PPE_CFG_QOS_VMID_MODE BIT(15)
+#define PPE_CFG_BUS_LOCAL_REL (BIT(9) | BIT(15) | BIT(19) | BIT(23))
+#else
#define PPE_CFG_QOS_VMID_GRP_SHIFT 8
+#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11
+#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(12)
+#define PPE_CFG_QOS_VMID_MODE BIT(14)
+#define PPE_CFG_BUS_LOCAL_REL BIT(14)
+#endif /* CONFIG_HI13X1_GMAC */

#define PPE_CFG_RX_FIFO_FSFU BIT(11)
#define PPE_CFG_RX_DEPTH_SHIFT 16
#define PPE_CFG_RX_START_SHIFT 0
-#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11

-#define PPE_CFG_BUS_LOCAL_REL BIT(14)
#define PPE_CFG_BUS_BIG_ENDIEN BIT(0)

#define RX_DESC_NUM 128
--
1.8.5.6