Re: [PATCH 2/2] arm64: dts: imx8mm: Assign highest opp as suspend opp

From: Viresh Kumar
Date: Mon Jul 08 2019 - 04:50:03 EST


On 08-07-19, 08:43, Anson Huang wrote:
> Hi, Viresh
>
> > On 04-07-19, 07:49, Leonard Crestez wrote:
> > > On 7/4/2019 9:23 AM, Anson.Huang@xxxxxxx wrote:
> > > > From: Anson Huang <Anson.Huang@xxxxxxx>
> > > >
> > > > Assign highest OPP as suspend OPP to reduce suspend/resume latency
> > > > on i.MX8MM.
> > > >
> > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > > > ---
> > > > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 1 +
> > > > 1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > > index b11fc5e..3a62407 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > > > @@ -136,6 +136,7 @@
> > > > opp-microvolt = <1000000>;
> > > > opp-supported-hw = <0x8>, <0x3>;
> > > > clock-latency-ns = <150000>;
> > > > + opp-suspend;
> > > > };
> > > > };
> > >
> > > What if the highest OPP is unavailable due to speed grading?
> >
> > What does this exactly mean ? How is the OPP made unavailable in your
> > case ?
>
> That is because in i.MX8M series SoCs, the speed grading and market segment
> fuses settings could affect the OPP defined in DT, in a word, all possible OPPs
> are defined in DT, but each parts could ONLY select some of them to be working
> OPPs, so if the "opp-suspend" is added for 1 OPP in DT, if the part's speed grading or
> market segment fuse settings make that OPP as unavailable, then that "opp-suspend"
> is NOT working at all.

How is this selection done ? You using some OPP helper or something
else ?

--
viresh