[PATCH RESEND tty/serial 1/1] tty: serial: fsl_lpuart: add imx8qxp support

From: fugang . duan
Date: Thu Jul 04 2019 - 09:49:20 EST


From: Fugang Duan <fugang.duan@xxxxxxx>

The lpuart of imx8ulp is basically the same as imx7ulp, but it
has new feature support based on imx7ulp, like it can assert a
DMA request on EOP(end-of-packet). imx8ulp lpuart use two clocks,
one is ipg bus clock that is used to access registers, the other
is baud clock that is used to transmit-receive data.

Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
---
drivers/tty/serial/fsl_lpuart.c | 106 ++++++++++++++++++++++++++++++++--------
1 file changed, 86 insertions(+), 20 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 2f24d97..92dad2b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -234,9 +234,18 @@

static DEFINE_IDA(fsl_lpuart_ida);

+enum lpuart_type {
+ VF610_LPUART,
+ LS1021A_LPUART,
+ IMX7ULP_LPUART,
+ IMX8QXP_LPUART,
+};
+
struct lpuart_port {
struct uart_port port;
- struct clk *clk;
+ enum lpuart_type devtype;
+ struct clk *ipg_clk;
+ struct clk *baud_clk;
unsigned int txfifo_size;
unsigned int rxfifo_size;

@@ -261,19 +270,29 @@ struct lpuart_port {
};

struct lpuart_soc_data {
- char iotype;
- u8 reg_off;
+ enum lpuart_type devtype;
+ char iotype;
+ u8 reg_off;
};

static const struct lpuart_soc_data vf_data = {
+ .devtype = VF610_LPUART,
.iotype = UPIO_MEM,
};

static const struct lpuart_soc_data ls_data = {
+ .devtype = LS1021A_LPUART,
.iotype = UPIO_MEM32BE,
};

-static struct lpuart_soc_data imx_data = {
+static struct lpuart_soc_data imx7ulp_data = {
+ .devtype = IMX7ULP_LPUART,
+ .iotype = UPIO_MEM32,
+ .reg_off = IMX_REG_OFF,
+};
+
+static struct lpuart_soc_data imx8qxp_data = {
+ .devtype = IMX8QXP_LPUART,
.iotype = UPIO_MEM32,
.reg_off = IMX_REG_OFF,
};
@@ -281,7 +300,8 @@ static struct lpuart_soc_data imx_data = {
static const struct of_device_id lpuart_dt_ids[] = {
{ .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
{ .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
- { .compatible = "fsl,imx7ulp-lpuart", .data = &imx_data, },
+ { .compatible = "fsl,imx7ulp-lpuart", .data = &imx7ulp_data, },
+ { .compatible = "fsl,imx8qxp-lpuart", .data = &imx8qxp_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
@@ -289,6 +309,11 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);

+static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
+{
+ return sport->devtype == IMX8QXP_LPUART;
+}
+
static inline u32 lpuart32_read(struct uart_port *port, u32 off)
{
switch (port->iotype) {
@@ -314,6 +339,39 @@ static inline void lpuart32_write(struct uart_port *port, u32 val,
}
}

+static int __lpuart_enable_clks(struct lpuart_port *sport, bool is_en)
+{
+ int ret = 0;
+
+ if (is_en) {
+ ret = clk_prepare_enable(sport->ipg_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(sport->baud_clk);
+ if (ret) {
+ clk_disable_unprepare(sport->ipg_clk);
+ return ret;
+ }
+ } else {
+ clk_disable_unprepare(sport->baud_clk);
+ clk_disable_unprepare(sport->ipg_clk);
+ }
+
+ return 0;
+}
+
+static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport)
+{
+ if (is_imx8qxp_lpuart(sport))
+ return clk_get_rate(sport->baud_clk);
+
+ return clk_get_rate(sport->ipg_clk);
+}
+
+#define lpuart_enable_clks(x) __lpuart_enable_clks(x, true)
+#define lpuart_disable_clks(x) __lpuart_enable_clks(x, false)
+
static void lpuart_stop_tx(struct uart_port *port)
{
unsigned char temp;
@@ -2069,7 +2127,7 @@ lpuart_console_get_options(struct lpuart_port *sport, int *baud,
brfa = readb(sport->port.membase + UARTCR4);
brfa &= UARTCR4_BRFA_MASK;

- uartclk = clk_get_rate(sport->clk);
+ uartclk = lpuart_get_baud_clk_rate(sport);
/*
* baud = mod_clk/(16*(sbr[13]+(brfa)/32)
*/
@@ -2112,7 +2170,7 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
bd = lpuart32_read(&sport->port, UARTBAUD);
bd &= UARTBAUD_SBR_MASK;
sbr = bd;
- uartclk = clk_get_rate(sport->clk);
+ uartclk = lpuart_get_baud_clk_rate(sport);
/*
* baud = mod_clk/(16*(sbr[13]+(brfa)/32)
*/
@@ -2286,6 +2344,7 @@ static int lpuart_probe(struct platform_device *pdev)
sport->port.mapbase = res->start;
sport->port.dev = &pdev->dev;
sport->port.type = PORT_LPUART;
+ sport->devtype = sdata->devtype;
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "cannot obtain irq\n");
@@ -2301,20 +2360,27 @@ static int lpuart_probe(struct platform_device *pdev)

sport->port.rs485_config = lpuart_config_rs485;

- sport->clk = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(sport->clk)) {
- ret = PTR_ERR(sport->clk);
- dev_err(&pdev->dev, "failed to get uart clk: %d\n", ret);
+ sport->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(sport->ipg_clk)) {
+ ret = PTR_ERR(sport->ipg_clk);
+ dev_err(&pdev->dev, "failed to get uart ipg clk: %d\n", ret);
return ret;
}

- ret = clk_prepare_enable(sport->clk);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable uart clk: %d\n", ret);
- return ret;
+ sport->baud_clk = NULL;
+ if (is_imx8qxp_lpuart(sport)) {
+ sport->baud_clk = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(sport->baud_clk)) {
+ ret = PTR_ERR(sport->baud_clk);
+ dev_err(&pdev->dev, "failed to get uart baud clk: %d\n", ret);
+ return ret;
+ }
}

- sport->port.uartclk = clk_get_rate(sport->clk);
+ ret = lpuart_enable_clks(sport);
+ if (ret)
+ return ret;
+ sport->port.uartclk = lpuart_get_baud_clk_rate(sport);

lpuart_ports[sport->port.line] = sport;

@@ -2362,7 +2428,7 @@ static int lpuart_probe(struct platform_device *pdev)

failed_attach_port:
failed_irq_request:
- clk_disable_unprepare(sport->clk);
+ lpuart_disable_clks(sport);
return ret;
}

@@ -2374,7 +2440,7 @@ static int lpuart_remove(struct platform_device *pdev)

ida_simple_remove(&fsl_lpuart_ida, sport->port.line);

- clk_disable_unprepare(sport->clk);
+ lpuart_disable_clks(sport);

if (sport->dma_tx_chan)
dma_release_channel(sport->dma_tx_chan);
@@ -2439,7 +2505,7 @@ static int lpuart_suspend(struct device *dev)
}

if (sport->port.suspended && !irq_wake)
- clk_disable_unprepare(sport->clk);
+ lpuart_disable_clks(sport);

return 0;
}
@@ -2451,7 +2517,7 @@ static int lpuart_resume(struct device *dev)
unsigned long temp;

if (sport->port.suspended && !irq_wake)
- clk_prepare_enable(sport->clk);
+ lpuart_enable_clks(sport);

if (lpuart_is_32(sport)) {
lpuart32_setup_watermark(sport);
--
2.7.4