early console in extract_kernel
input_data: 0x00000000021c92e9
input_len: 0x0000000000564173
output: 0x0000000001000000
output_len: 0x00000000017058c0
kernel_total_size: 0x0000000001426000
trampoline_32bit: 0x000000000009b000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
Linux version 4.19.56-test-rt23+ (rostedt@mammoth) (gcc version 8.1.0 (GCC)) #17 SMP PREEMPT RT Mon Jul 1 15:34:05 EDT 2019
Command line: ro root=/dev/mapper/VG01-F13x64 rd_LVM_LV=VG01/F13x64 rd_NO_LUKS rd_NO_MD rd_NO_DM console=ttyS0,115200 ignore_loglevel selinux=0 earlyprintk=ttyS0,115200 ftrace_dump_on_oops crashkernel=128M@256M threadirqs nohz_full=3 nohz_extended=3
Disabled fast string operations
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007d6affff] usable
BIOS-e820: [mem 0x000000007d6b0000-0x000000007d6bdfff] ACPI data
BIOS-e820: [mem 0x000000007d6be000-0x000000007d6effff] ACPI NVS
BIOS-e820: [mem 0x000000007d6f0000-0x000000007d6fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa6f000-0x00000000ffa6ffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
debug: ignoring loglevel setting.
bootconsole [earlyser0] enabled
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
tsc: Fast TSC calibration using PIT
tsc: Detected 2660.192 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7d6b0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07D700000 mask FFFF00000 uncachable
  2 base 07D800000 mask FFF800000 uncachable
  3 base 07E000000 mask FFE000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
found SMP MP-table at [mem 0x000ff780-0x000ff78f]
BRK [0x02401000, 0x02401fff] PGTABLE
BRK [0x02402000, 0x02402fff] PGTABLE
BRK [0x02403000, 0x02403fff] PGTABLE
BRK [0x02404000, 0x02404fff] PGTABLE
BRK [0x02405000, 0x02405fff] PGTABLE
RAMDISK: [mem 0x375e2000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9990 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000007D6B0000 000040 (v01 A M I  OEMRSDT  05000708 MSFT 00000097)
ACPI: FACP 0x000000007D6B0200 000084 (v02 A M I  OEMFACP  05000708 MSFT 00000097)
ACPI: DSDT 0x000000007D6B0490 006643 (v01 SDBLI9 SDBLI944 00000044 INTL 20051117)
ACPI: FACS 0x000000007D6BE000 000040
ACPI: APIC 0x000000007D6B0390 00006C (v01 A M I  OEMAPIC  05000708 MSFT 00000097)
ACPI: MCFG 0x000000007D6B0450 00003C (v01 A M I  OEMMCFG  05000708 MSFT 00000097)
ACPI: OEMB 0x000000007D6BE040 000079 (v01 A M I  AMI_OEM  05000708 MSFT 00000097)
ACPI: ASF! 0x000000007D6B6AE0 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
ACPI: GSCI 0x000000007D6BE0C0 002024 (v01 A M I  GMCHSCI  05000708 MSFT 00000097)
ACPI: iEIT 0x000000007D6C00F0 0000B0 (v01 A M I  EITTABLE 05000708 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007d6affff]
NODE_DATA(0) allocated [mem 0x7d69e000-0x7d6affff]
Reserving 128MB of memory at 256MB for crashkernel (System RAM: 2006MB)
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007d6affff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x000000007d6affff]
Reserved but unavailable: 100 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000007d6affff]
On node 0 totalpages: 513612
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 7963 pages used for memmap
  DMA32 zone: 509616 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7d800000-0x7dffffff]
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[mem 0x7e000000-0xfedfffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 44 pages/cpu s139712 r8192 d32320 u524288
pcpu-alloc: s139712 r8192 d32320 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 505564
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/VG01-F13x64 rd_LVM_LV=VG01/F13x64 rd_NO_LUKS rd_NO_MD rd_NO_DM console=ttyS0,115200 ignore_loglevel selinux=0 earlyprintk=ttyS0,115200 ftrace_dump_on_oops crashkernel=128M@256M threadirqs nohz_full=3 nohz_extended=3
Housekeeping: nohz unsupported. Build with CONFIG_NO_HZ_FULL
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1857456K/2054448K available (10248K kernel code, 1325K rwdata, 2496K rodata, 1672K init, 1004K bss, 196992K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 34220 entries in 134 pages
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
rcu: 	RCU priority boosting: priority 1 delay 500 ms.
	No expedited grace period (rcu_normal_after_boot).
	Tasks RCU enabled.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
bootconsole [earlyser0] disabled
ACPI: Core revision 20180810
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26585944dce, max_idle_ns: 440795285609 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.38 BogoMIPS (lpj=2660192)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Disabled at boot.
Dentry cache hash table entries: 262144 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Disabled fast string operations
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 24K
random: get_random_u64 called from copy_process.part.47+0x2c7/0x1aba with crng_init=0
smpboot: CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6)
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (21281.53 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7d6be000-0x7d6effff] (204800 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 5, 131072 bytes)
xor: measuring software checksum speed
   prefetch64-sse: 10240.000 MB/sec
   generic_sse:  8784.000 MB/sec
xor: using function: prefetch64-sse (10240.000 MB/sec)
RTC time: 15:57:10, date: 07/01/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1561996629.331:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
raid6: sse2x1   gen()  3281 MB/s
raid6: sse2x1   xor()  3177 MB/s
raid6: sse2x2   gen()  4250 MB/s
raid6: sse2x2   xor()  4072 MB/s
raid6: sse2x4   gen()  5941 MB/s
raid6: sse2x4   xor()  4542 MB/s
raid6: using algorithm sse2x4 gen() 5941 MB/s
raid6: .... xor() 4542 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 15 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7d700000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xffa80000-0xffafffff]
pci 0000:00:02.0: reg 0x14: [io  0xec00-0xec07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xff900000-0xff9fffff]
pci 0000:00:03.0: [8086:29c4] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xffa7bc00-0xffa7bc0f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: [8086:29c5] type 00 class 0x078000
pci 0000:00:03.1: reg 0x10: [mem 0xffa7b800-0xffa7b80f 64bit]
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:29c6] type 00 class 0x010185
pci 0000:00:03.2: reg 0x10: [io  0xe880-0xe887]
pci 0000:00:03.2: reg 0x14: [io  0xe800-0xe803]
pci 0000:00:03.2: reg 0x18: [io  0xe480-0xe487]
pci 0000:00:03.2: reg 0x1c: [io  0xe400-0xe403]
pci 0000:00:03.2: reg 0x20: [io  0xe080-0xe08f]
pci 0000:00:03.3: [8086:29c7] type 00 class 0x070002
pci 0000:00:03.3: reg 0x10: [io  0xe000-0xe007]
pci 0000:00:03.3: reg 0x14: [mem 0xffa7a000-0xffa7afff]
pci 0000:00:19.0: [8086:10bd] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xffa40000-0xffa5ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xffa79000-0xffa79fff]
pci 0000:00:19.0: reg 0x18: [io  0xdc00-0xdc1f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xd880-0xd89f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xd800-0xd81f]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xd480-0xd49f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xffa7b400-0xffa7b7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xffa70000-0xffa73fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xd400-0xd41f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xd080-0xd09f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xd000-0xd01f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xffa7b000-0xffa7b3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2910] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io  0xff90-0xff9f]
pci 0000:00:1f.2: reg 0x24: [io  0xffa0-0xffaf]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xffa78c00-0xffa78cff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0xc880-0xc887]
pci 0000:00:1f.5: reg 0x14: [io  0xc800-0xc803]
pci 0000:00:1f.5: reg 0x18: [io  0xc480-0xc487]
pci 0000:00:1f.5: reg 0x1c: [io  0xc400-0xc403]
pci 0000:00:1f.5: reg 0x20: [io  0xc080-0xc08f]
pci 0000:00:1f.5: reg 0x24: [io  0xc000-0xc00f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [104c:8231] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 02-03]
pci 0000:00:1c.2:   bridge window [mem 0xff500000-0xff5fffff]
pci_bus 0000:03: extended config space not accessible
pci 0000:03:00.0: [104c:8235] type 00 class 0x0c0010
pci 0000:03:00.0: reg 0x10: [mem 0xff5ff800-0xff5fffff]
pci 0000:03:00.0: reg 0x14: [mem 0xff5f8000-0xff5fbfff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0:   bridge window [mem 0xff500000-0xff5fffff]
pci_bus 0000:04: extended config space not accessible
pci 0000:04:00.0: [10ec:8139] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xb800-0xb8ff]
pci 0000:04:00.0: reg 0x14: [mem 0xff6ffc00-0xff6ffcff]
pci 0000:04:00.0: reg 0x30: [mem 0xff6e0000-0xff6effff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x7d700000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12 14 15)
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7d6b0000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:05: [io  0x0a20-0x0a3f] has been reserved
system 00:05: [io  0x0a00-0x0a0f] has been reserved
system 00:05: [io  0x0a10-0x0a1f] has been reserved
system 00:05: [io  0x0a40-0x0a5f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0800-0x087f] has been reserved
system 00:06: [io  0x0480-0x04bf] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xffa6f000-0xffa6ffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0x7d6fffff] could not be reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 17 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-03] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x7e000000-0x7e1fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x7e200000-0x7e3fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x7e400000-0x7e5fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x7e000000-0x7e1fffff]
pci 0000:00:1c.0:   bridge window [mem 0x7e200000-0x7e3fffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0:   bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:1c.2: PCI bridge to [bus 02-03]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:1c.2:   bridge window [mem 0x7e400000-0x7e5fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xff600000-0xff6fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x7d700000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x7e000000-0x7e1fffff]
pci_bus 0000:01: resource 2 [mem 0x7e200000-0x7e3fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
pci_bus 0000:02: resource 2 [mem 0x7e400000-0x7e5fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xff500000-0xff5fffff]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xff600000-0xff6fffff]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:04: resource 8 [mem 0x7d700000-0xffffffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 65536 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 7, 917504 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 1024 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:02:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
PCI: CLS mismatch (32 != 64), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10296K
workingset: timestamp_bits=53 max_order=19 bucket_order=0
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
pcieport 0000:00:1c.2: enabling device (0106 -> 0107)
pcieport 0000:00:1c.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.2: Signaling PME with IRQ 25
pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
0000:00:03.3: ttyS2 at I/O 0xe000 (irq = 17, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SATA.CHN0._GTM.FZHD], AE_NOT_FOUND (20180810/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SATA.CHN0._GTM, AE_NOT_FOUND (20180810/psparse-516)
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SATA.CHN1._GTM.FZHD], AE_NOT_FOUND (20180810/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SATA.CHN1._GTM, AE_NOT_FOUND (20180810/psparse-516)
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT1.CHN0._GTM.FZHD], AE_NOT_FOUND (20180810/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT1.CHN0._GTM, AE_NOT_FOUND (20180810/psparse-516)
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT1.CHN1._GTM.FZHD], AE_NOT_FOUND (20180810/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT1.CHN1._GTM, AE_NOT_FOUND (20180810/psparse-516)
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 19
ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 19
scsi host4: ata_generic
scsi host5: ata_generic
ata5: PATA max UDMA/100 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 18
ata6: PATA max UDMA/100 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:f5:f5:a8
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:04:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:04:00.0 eth1: RealTek RTL8139 at 0x(____ptrval____), 00:0e:2e:bb:df:48, IRQ 21
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xffa7b400
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.56-test-rt23+ ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa7b000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.56-test-rt23+ ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.19.56-test-rt23+ uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.19.56-test-rt23+ uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
tsc: Refined TSC clocksource calibration: 2660.002 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2657a5cbc80, max_idle_ns: 440795214860 ns
clocksource: Switched to clocksource tsc
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d480
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      HDT722516DLA380  A96A PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (165 GB/153 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.19.56-test-rt23+ uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.19.56-test-rt23+ uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: PLEXTOR DVDR   PX-755A, 1.04, max UDMA/66
ata2.00: configured for UDMA/66
scsi 1:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-755A   1.04 PQ: 0 ANSI: 5
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.19.56-test-rt23+ uhci_hcd
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.19.56-test-rt23+ uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ipip: IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge firewalling registered
Key type dns_resolver registered
mce: Using 6 MCE banks
sched_clock: Marking stable (3743578788, 473603640)->(4328465647, -111283219)
registered taskstats version 1
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
  Magic number: 11:114:992
tty ttyd5: hash matches
rtc_cmos 00:01: setting system clock to 2019-07-01 15:57:13 UTC (1561996633)
Freeing unused kernel image memory: 1672K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2024K
Freeing unused kernel image memory: 1600K
rodata_test: all tests were successful
Run /init as init process
usb 6-1: new full-speed USB device number 2 using uhci_hcd
dracut: dracut-005-5.fc13
dracut: rd_NO_LUKS: removing cryptoluks activation
udev: starting version 153
udevd (156): /proc/156/oom_adj is deprecated, please use /proc/156/oom_score_adj instead.
usb 6-1: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00
pci 0000:00:00.0: Intel G33 Chipset
pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
pci 0000:00:00.0: detected 8192K stolen memory
[drm] Replacing VGA console driver
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
[drm] RC6 disabled, disabling runtime PM support
[drm] Initialized overlay support.
[drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
dracut: Starting plymouth daemon
%Gdracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 6-1.1: new low-speed USB device number 3 using uhci_hcd
FDC 0 is a National Semiconductor PC87306
usb 6-1.1: New USB device found, idVendor=0557, idProduct=2261, bcdDevice= 1.00
usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.1: Product: GCS1808 V3.2.319
usb 6-1.1: Manufacturer: ATEN International Co. Ltd
%Ginput: ATEN International Co. Ltd GCS1808 V3.2.319 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:0557:2261.0001/input/input5
hid-generic 0003:0557:2261.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN International Co. Ltd GCS1808 V3.2.319] on usb-0000:00:1d.0-1.1/input0
random: fast init done
input: ATEN International Co. Ltd GCS1808 V3.2.319 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:0557:2261.0002/input/input6
input: ATEN International Co. Ltd GCS1808 V3.2.319 System Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:0557:2261.0002/input/input7
hid-generic 0003:0557:2261.0002: input,hidraw1: USB HID v1.10 Device [ATEN International Co. Ltd GCS1808 V3.2.319] on usb-0000:00:1d.0-1.1/input1
input: ATEN International Co. Ltd GCS1808 V3.2.319 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.2/0003:0557:2261.0003/input/input8
hid-generic 0003:0557:2261.0003: input,hidraw2: USB HID v1.10 Mouse [ATEN International Co. Ltd GCS1808 V3.2.319] on usb-0000:00:1d.0-1.1/input2
input: ATEN International Co. Ltd GCS1808 V3.2.319 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.3/0003:0557:2261.0004/input/input9
hid-generic 0003:0557:2261.0004: input,hidraw3: USB HID v1.10 Mouse [ATEN International Co. Ltd GCS1808 V3.2.319] on usb-0000:00:1d.0-1.1/input3
FATAL: Module scsi_wait_scan not found.
dracut: Scanning devices sda3 sda6  for LVM logical volumes VG01/F13x64 
random: lvm: uninitialized urandom read (4 bytes read)
dracut: inactive '/dev/VG00/F9x64' [13.75 GiB] inherit
dracut: inactive '/dev/VG00/Work' [34.28 GiB] inherit
dracut: inactive '/dev/VG01/GuestF12' [20.00 GiB] inherit
dracut: inactive '/dev/VG01/F13x64' [20.00 GiB] inherit
dracut: inactive '/dev/VG01/GuestRhel' [20.00 GiB] inherit
dracut: inactive '/dev/VG01/GuestF12-32' [20.00 GiB] inherit
dracut: inactive '/dev/VG01/F16x86' [20.00 GiB] inherit
random: lvm: uninitialized urandom read (4 bytes read)
random: lvm: uninitialized urandom read (2 bytes read)
EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
dracut: Mounted root filesystem /dev/mapper/VG01-F13x64
dracut: Switching root
watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [sh:739]
Modules linked in: floppy i915 drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect syscopyarea iosf_mbi i2c_algo_bit video
CPU: 1 PID: 739 Comm: sh Not tainted 4.19.56-test-rt23+ #17
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:_raw_spin_unlock_irq+0x17/0x4d
Code: 48 8b 12 0f ba e2 12 73 07 e8 f1 4a 92 ff 31 c0 5b 5d c3 66 66 66 66 90 55 48 89 e5 c6 07 00 e8 23 3e a3 ff fb bf 01 00 00 00 <e8> a7 27 9a ff 65 8b 05 c8 7f 93 7e 85 c0 74 1f a9 ff ff ff 7f 75
RSP: 0018:ffffc9000104fbb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000000 RBX: ffffc9000104fd58 RCX: 0000000000000003
RDX: 0000000000000000 RSI: ffffffff8108ffab RDI: 0000000000000001
RBP: ffffc9000104fbb8 R08: ffffffff816dcd76 R09: 00000000000205c0
R10: 00000000000005d8 R11: 0000001accde6010 R12: ffffc9000104fbc8
R13: ffffc900008f3ca0 R14: ffff888079f70328 R15: ffff8880757254b0
FS:  0000000000000000(0000) GS:ffff88807b280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000030662001b8 CR3: 0000000078c4e000 CR4: 00000000000006e0
Call Trace:
 swake_up_all+0xa6/0xde
 __d_lookup_done+0x7c/0xc7
 __d_add+0x44/0xf7
 d_splice_alias+0x208/0x218
 ext4_lookup+0x1a6/0x1c5
 path_openat+0x63a/0xb15
 ? preempt_count_sub+0x93/0x9d
 ? migrate_enable+0x277/0x29a
 do_filp_open+0x51/0xae
 ? trace_preempt_on+0xde/0xe7
 ? rt_spin_unlock+0x13/0x24
 ? __alloc_fd+0x145/0x155
 do_sys_open+0x81/0x125
 __x64_sys_open+0x21/0x23
 do_syscall_64+0x5c/0x6e
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x3054a16b97
Code: c3 66 90 c7 05 66 85 20 00 16 00 00 00 b8 ff ff ff ff c3 f7 d8 89 05 58 85 20 00 83 c8 ff c3 90 90 90 90 b8 02 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8d 0d 39 85 20 00 31 d2 48 29 c2 89
RSP: 002b:00007ffc74454018 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
RAX: ffffffffffffffda RBX: 0000003054c1f128 RCX: 0000003054a16b97
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ff89cb646fc
RBP: 00007ffc74454090 R08: 00007ffc7445447f R09: 0000000000000000
R10: 000000006ffffeff R11: 0000000000000246 R12: 0000000000000008
R13: 0000003054c1e000 R14: 00007ff89cb646fc R15: 00007ffc7445447f
watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [sh:739]
Modules linked in: floppy i915 drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect syscopyarea iosf_mbi i2c_algo_bit video
CPU: 1 PID: 739 Comm: sh Tainted: G             L    4.19.56-test-rt23+ #17
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:_raw_spin_unlock_irq+0x17/0x4d
Code: 48 8b 12 0f ba e2 12 73 07 e8 f1 4a 92 ff 31 c0 5b 5d c3 66 66 66 66 90 55 48 89 e5 c6 07 00 e8 23 3e a3 ff fb bf 01 00 00 00 <e8> a7 27 9a ff 65 8b 05 c8 7f 93 7e 85 c0 74 1f a9 ff ff ff 7f 75
RSP: 0018:ffffc9000104fbb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000000 RBX: ffffc9000104fd58 RCX: 0000000000000003
RDX: 0000000000000000 RSI: ffffffff8108ffab RDI: 0000000000000001
RBP: ffffc9000104fbb8 R08: ffffffff816dcd76 R09: 00000000000205c0
R10: 00000000000005d8 R11: 0000001accde6010 R12: ffffc9000104fbc8
R13: ffffc900008f3ca0 R14: ffff888079f70328 R15: ffff8880757254b0
FS:  0000000000000000(0000) GS:ffff88807b280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000030662001b8 CR3: 0000000078c4e000 CR4: 00000000000006e0
Call Trace:
 swake_up_all+0xa6/0xde
 __d_lookup_done+0x7c/0xc7
 __d_add+0x44/0xf7
 d_splice_alias+0x208/0x218
 ext4_lookup+0x1a6/0x1c5
 path_openat+0x63a/0xb15
 ? preempt_count_sub+0x93/0x9d
 ? migrate_enable+0x277/0x29a
 do_filp_open+0x51/0xae
 ? trace_preempt_on+0xde/0xe7
 ? rt_spin_unlock+0x13/0x24
 ? __alloc_fd+0x145/0x155
 do_sys_open+0x81/0x125
 __x64_sys_open+0x21/0x23
 do_syscall_64+0x5c/0x6e
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x3054a16b97
Code: c3 66 90 c7 05 66 85 20 00 16 00 00 00 b8 ff ff ff ff c3 f7 d8 89 05 58 85 20 00 83 c8 ff c3 90 90 90 90 b8 02 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8d 0d 39 85 20 00 31 d2 48 29 c2 89
RSP: 002b:00007ffc74454018 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
RAX: ffffffffffffffda RBX: 0000003054c1f128 RCX: 0000003054a16b97
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ff89cb646fc
RBP: 00007ffc74454090 R08: 00007ffc7445447f R09: 0000000000000000
R10: 000000006ffffeff R11: 0000000000000246 R12: 0000000000000008
R13: 0000003054c1e000 R14: 00007ff89cb646fc R15: 00007ffc7445447f
watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [sh:739]
Modules linked in: floppy i915 drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect syscopyarea iosf_mbi i2c_algo_bit video
CPU: 1 PID: 739 Comm: sh Tainted: G             L    4.19.56-test-rt23+ #17
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:_raw_spin_unlock_irq+0x17/0x4d
Code: 48 8b 12 0f ba e2 12 73 07 e8 f1 4a 92 ff 31 c0 5b 5d c3 66 66 66 66 90 55 48 89 e5 c6 07 00 e8 23 3e a3 ff fb bf 01 00 00 00 <e8> a7 27 9a ff 65 8b 05 c8 7f 93 7e 85 c0 74 1f a9 ff ff ff 7f 75
RSP: 0018:ffffc9000104fbb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000000 RBX: ffffc9000104fd58 RCX: 0000000000000003
RDX: 0000000000000000 RSI: ffffffff8108ffab RDI: 0000000000000001
RBP: ffffc9000104fbb8 R08: ffffffff816dcd76 R09: 00000000000205c0
R10: 00000000000005d8 R11: 0000001accde6010 R12: ffffc9000104fbc8
R13: ffffc900008f3ca0 R14: ffff888079f70328 R15: ffff8880757254b0
FS:  0000000000000000(0000) GS:ffff88807b280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000030662001b8 CR3: 0000000078c4e000 CR4: 00000000000006e0
Call Trace:
 swake_up_all+0xa6/0xde
 __d_lookup_done+0x7c/0xc7
 __d_add+0x44/0xf7
 d_splice_alias+0x208/0x218
 ext4_lookup+0x1a6/0x1c5
 path_openat+0x63a/0xb15
 ? preempt_count_sub+0x93/0x9d
 ? migrate_enable+0x277/0x29a
 do_filp_open+0x51/0xae
 ? trace_preempt_on+0xde/0xe7
 ? rt_spin_unlock+0x13/0x24
 ? __alloc_fd+0x145/0x155
 do_sys_open+0x81/0x125
 __x64_sys_open+0x21/0x23
 do_syscall_64+0x5c/0x6e
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x3054a16b97
Code: c3 66 90 c7 05 66 85 20 00 16 00 00 00 b8 ff ff ff ff c3 f7 d8 89 05 58 85 20 00 83 c8 ff c3 90 90 90 90 b8 02 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8d 0d 39 85 20 00 31 d2 48 29 c2 89
RSP: 002b:00007ffc74454018 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
RAX: ffffffffffffffda RBX: 0000003054c1f128 RCX: 0000003054a16b97
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ff89cb646fc
RBP: 00007ffc74454090 R08: 00007ffc7445447f R09: 0000000000000000
R10: 000000006ffffeff R11: 0000000000000246 R12: 0000000000000008
R13: 0000003054c1e000 R14: 00007ff89cb646fc R15: 00007ffc7445447f