Re: Testing the recent RISC-V DT patchsets

[Troy Benjegerdes]

> On May 29, 2019, at 5:04 AM, Loys Ollivier <lollivier@xxxxxxxxxxxx> wrote:
> 
> On Wed 29 May 2019 at 00:50, Atish Patra <atish.patra@xxxxxxx> wrote:
> 
>> On 5/28/19 8:36 AM, Karsten Merker wrote:
>>> On Tue, May 28, 2019 at 05:10:42PM +0200, Loys Ollivier wrote:
>>>> On Tue 28 May 2019 at 01:32, Paul Walmsley <paul.walmsley@xxxxxxxxxx> wrote:
>>>> 
>>>>> An update for those testing RISC-V patches: here's a new branch of
>>>>> riscv-pk/bbl that doesn't try to read or modify the DT data at all, which
>>>>> should be useful until U-Boot settles down.
>>> [...]
>>>>> Here is an Linux kernel branch with updated DT data that can be booted
>>>>> with the above bootloader:
>>>>> 
>>>>>    https://github.com/sifive/riscv-linux/tree/dev/paulw/dts-v5.2-rc1-experimental
>>>>> 
>>>>> A sample boot log follows, using a 'defconfig' build from that branch.
>>>> 
>>>> Thanks Paul, I can confirm that it works.
>>>> 
>>>> Something is still unclear to myself.
>>>> Using FSBL + riscv-pk/bbl the linux kernel + device tree boots.
>>>> Neither FSBL nor riscv-pk/bbl are modifying the DT.
>>>> 
>>>> Using FSBL + OpenSBI + U-Boot the same kernel + device tree hangs on
>>>> running /init.
>>>> 
>>>> Would you have any pointer on what riscv-pk does that OpenSBI/U-boot doesn't ?
>>>> Or maybe it is the other way around - OpenSBI/U-boot does something that
>>>> extra that should not happen.
>>> 
>>> Hello,
>>> 
>>> I don't know which version of OpenSBI you are using, but there is
>>> a problem with the combination of kernel 5.2-rc1 and OpenSBI
>>> versions before commit
>>> 
>>>   https://github.com/riscv/opensbi/commit/4e2cd478208531c47343290f15b577d40c82649c
>>> 
>>> that can result in a hang on executing init, so in case you
>>> should be using an older OpenSBI build that might be the source
>>> of the problem that you are experiencing.
>>> 
>>> Regards,
>>> Karsten
>>> 
>> 
>> I verified the updated DT with upstream kernel for the boot flow OpenSBI 
>> + U-Boot + Linux or OpenSBI + Linux.
>> 
>> OpenSBI should be compiled for sifive platform with following additional 
>> argument
>> 
>> FW_PAYLOAD_FDT_PATH=<linux kernel 
>> source>/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dtb
>> 
>> FYI: It will only work when kernel is given a payload to U-Boot/OpenSBI 
>> directly.
>> 
> 
> Hum, I am surprised by this statement.
> I was able to verify the latest DT patch serie from Paul with:
> OpenSBI + U-Boot + Linux & DT.
> 
> Following the OpenSBI documentation [0] with U-Boot payload:
> FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin
> 
> I get an U-Boot prompt and then I can just load the linux kernel and
> device tree from the network.
> 
> [0]: https://github.com/riscv/opensbi/blob/master/docs/platform/sifive_fu540.md#building-sifive-fu540-platform
> 

Could you confirm which git hash of U-boot you are building, and that the .config matches
the defconfig (or send me the .config you used)?

Iâd like to get everything thatâs working integrated in one place into a freedom-u-sdk test branch.


>> Network booting is still not working as the clock driver probe doesn't 
>> happen because of the updated DT.
>> 
>> -- 
>> Regards,
>> Atish
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv