[PATCH 5.0 053/139] clk: mediatek: Disable tuner_en before change PLL rate

From: Greg Kroah-Hartman
Date: Thu May 23 2019 - 15:25:49 EST


From: Owen Chen <owen.chen@xxxxxxxxxxxx>

commit be17ca6ac76a5cfd07cc3a0397dd05d6929fcbbb upstream.

PLLs with tuner_en bit, such as APLL1, need to disable
tuner_en before apply new frequency settings, or the new frequency
settings (pcw) will not be applied.
The tuner_en bit will be disabled during changing PLL rate
and be restored after new settings applied.

Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support)
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Owen Chen <owen.chen@xxxxxxxxxxxx>
Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
Reviewed-by: James Liao <jamesjj.liao@xxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/clk/mediatek/clk-pll.c | 48 +++++++++++++++++++++++++++++------------
1 file changed, 34 insertions(+), 14 deletions(-)

--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -88,6 +88,32 @@ static unsigned long __mtk_pll_recalc_ra
return ((unsigned long)vco + postdiv - 1) / postdiv;
}

+static void __mtk_pll_tuner_enable(struct mtk_clk_pll *pll)
+{
+ u32 r;
+
+ if (pll->tuner_en_addr) {
+ r = readl(pll->tuner_en_addr) | BIT(pll->data->tuner_en_bit);
+ writel(r, pll->tuner_en_addr);
+ } else if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+}
+
+static void __mtk_pll_tuner_disable(struct mtk_clk_pll *pll)
+{
+ u32 r;
+
+ if (pll->tuner_en_addr) {
+ r = readl(pll->tuner_en_addr) & ~BIT(pll->data->tuner_en_bit);
+ writel(r, pll->tuner_en_addr);
+ } else if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+}
+
static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
int postdiv)
{
@@ -96,6 +122,9 @@ static void mtk_pll_set_rate_regs(struct

pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;

+ /* disable tuner */
+ __mtk_pll_tuner_disable(pll);
+
/* set postdiv */
val = readl(pll->pd_addr);
val &= ~(POSTDIV_MASK << pll->data->pd_shift);
@@ -122,6 +151,9 @@ static void mtk_pll_set_rate_regs(struct
if (pll->tuner_addr)
writel(con1 + 1, pll->tuner_addr);

+ /* restore tuner_en */
+ __mtk_pll_tuner_enable(pll);
+
if (pll_en)
udelay(20);
}
@@ -228,13 +260,7 @@ static int mtk_pll_prepare(struct clk_hw
r |= pll->data->en_mask;
writel(r, pll->base_addr + REG_CON0);

- if (pll->tuner_en_addr) {
- r = readl(pll->tuner_en_addr) | BIT(pll->data->tuner_en_bit);
- writel(r, pll->tuner_en_addr);
- } else if (pll->tuner_addr) {
- r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
- writel(r, pll->tuner_addr);
- }
+ __mtk_pll_tuner_enable(pll);

udelay(20);

@@ -258,13 +284,7 @@ static void mtk_pll_unprepare(struct clk
writel(r, pll->base_addr + REG_CON0);
}

- if (pll->tuner_en_addr) {
- r = readl(pll->tuner_en_addr) & ~BIT(pll->data->tuner_en_bit);
- writel(r, pll->tuner_en_addr);
- } else if (pll->tuner_addr) {
- r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
- writel(r, pll->tuner_addr);
- }
+ __mtk_pll_tuner_disable(pll);

r = readl(pll->base_addr + REG_CON0);
r &= ~CON0_BASE_EN;