[PATCH] soc: qcom: apr: Don't use reg for domain id

From: Bjorn Andersson
Date: Tue May 21 2019 - 21:56:25 EST


The reg property represents the address and size on the bus that a
device lives, but for APR the parent is a rpmsg bus, which does not have
numerical addresses. Simply defining #address/#size-cells to 1 and 0,
respectively, to silence the compiler is not an appropriate solution.

Replace the use of "reg" with an APR specific property.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

The APR device was recently added to msm8996.dtsi, but this is still
depending on working SMMU to provide functional audio support.

Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt | 2 +-
drivers/soc/qcom/apr.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index bcc612cc7423..38d3c06abc41 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -9,7 +9,7 @@ used for audio/voice services on the QDSP.
Value type: <stringlist>
Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"

-- reg
+- qcom,apr-domain
Usage: required
Value type: <u32>
Definition: Destination processor ID.
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 74f8b9607daa..b83d71b2e0a4 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -276,7 +276,7 @@ static int apr_probe(struct rpmsg_device *rpdev)
if (!apr)
return -ENOMEM;

- ret = of_property_read_u32(dev->of_node, "reg", &apr->dest_domain_id);
+ ret = of_property_read_u32(dev->of_node, "qcom,apr-domain", &apr->dest_domain_id);
if (ret) {
dev_err(dev, "APR Domain ID not specified in DT\n");
return ret;
--
2.18.0