[PATCH 1/3] rtc: s35390a: clarify INT2 pin output modes

From: Richard Leitner
Date: Tue May 21 2019 - 10:30:42 EST


Fix the INT2 mode mask to not include the "TEST" flag. Furthermore
remove the not needed reversion of bits when parsing the INT2 modes.
Instead reverse the INT2_MODE defines.

Additionally mention the flag names from the datasheet for the different
modes in the comments.

Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>
---
drivers/rtc/rtc-s35390a.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index 3c64dbb08109..6fb6d835b178 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -45,12 +45,13 @@
/* flag for STATUS2 */
#define S35390A_FLAG_TEST 0x01

-#define S35390A_INT2_MODE_MASK 0xF0
-
+/* INT2 pin output mode */
+#define S35390A_INT2_MODE_MASK 0x0E
#define S35390A_INT2_MODE_NOINTR 0x00
-#define S35390A_INT2_MODE_FREQ 0x10
-#define S35390A_INT2_MODE_ALARM 0x40
-#define S35390A_INT2_MODE_PMIN_EDG 0x20
+#define S35390A_INT2_MODE_ALARM 0x02 /* INT2AE */
+#define S35390A_INT2_MODE_PMIN_EDG 0x04 /* INT2ME */
+#define S35390A_INT2_MODE_FREQ 0x08 /* INT2FE */
+#define S35390A_INT2_MODE_PMIN 0x0C /* INT2ME | INT2FE */

static const struct i2c_device_id s35390a_id[] = {
{ "s35390a", 0 },
@@ -303,9 +304,6 @@ static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
else
sts = S35390A_INT2_MODE_NOINTR;

- /* This chip expects the bits of each byte to be in reverse order */
- sts = bitrev8(sts);
-
/* set interupt mode*/
err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
if (err < 0)
@@ -343,7 +341,7 @@ static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
if (err < 0)
return err;

- if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+ if ((sts & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
/*
* When the alarm isn't enabled, the register to configure
* the alarm time isn't accessible.
--
2.20.1