Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

From: Borislav Petkov
Date: Fri May 17 2019 - 15:36:48 EST


On Fri, May 17, 2019 at 11:06:07AM -0700, Luck, Tony wrote:
> and thus end up with that extra level on indent for the rest
> of the function.

Ok:

---
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5bcecadcf4d9..25e501a853cd 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1493,6 +1493,11 @@ static int __mcheck_cpu_mce_banks_init(void)
for (i = 0; i < n_banks; i++) {
struct mce_bank *b = &mce_banks[i];

+ /*
+ * Init them all, __mcheck_cpu_apply_quirks() is going to apply
+ * the required vendor quirks before
+ * __mcheck_cpu_init_clear_banks() does the final bank setup.
+ */
b->ctl = -1ULL;
b->init = 1;
}
@@ -1562,6 +1567,7 @@ static void __mcheck_cpu_init_generic(void)
static void __mcheck_cpu_init_clear_banks(void)
{
struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
+ u64 msrval;
int i;

for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
@@ -1569,7 +1575,13 @@ static void __mcheck_cpu_init_clear_banks(void)

if (!b->init)
continue;
+
+ /* Check if any bits are implemented in h/w */
wrmsrl(msr_ops.ctl(i), b->ctl);
+ rdmsrl(msr_ops.ctl(i), msrval);
+
+ b->init = !!msrval;
+
wrmsrl(msr_ops.status(i), 0);
}
}
@@ -2095,6 +2107,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,

b = &per_cpu(mce_banks_array, s->id)[bank];

+ if (!b->init)
+ return -ENODEV;
+
return sprintf(buf, "%llx\n", b->ctl);
}

@@ -2113,6 +2128,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,

b = &per_cpu(mce_banks_array, s->id)[bank];

+ if (!b->init)
+ return -ENODEV;
+
b->ctl = new;
mce_restart();


--
Regards/Gruss,
Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.