[PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs

From: Anson Huang
Date: Sun May 12 2019 - 05:59:10 EST


On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns
corresponding power supply for 1p0d/1p2 LDO to avoid confusion by
below log:

vdd1p0d: supplied by regulator-dummy
vdd1p2: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p0d: supplied by SW2
vdd1p2: supplied by SW2

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
No code change, just resend patch with correct encoding.
---
arch/arm/boot/dts/imx7d-sdb.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 202922e..efc83bc 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -379,6 +379,14 @@
status = "okay";
};

+&reg_1p0d {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+ vin-supply = <&sw2_reg>;
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
--
2.7.4