[GIT PULL] spi updates for v5.2

From: Mark Brown
Date: Mon May 06 2019 - 10:33:57 EST


The following changes since commit 37624b58542fb9f2d9a70e6ea006ef8a5f66c30b:

Linux 5.1-rc7 (2019-04-28 17:04:13 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git tags/spi-v5.2

for you to fetch changes up to 2e5f081003f033d37be3faf052aaccc8b6a44aa5:

Merge branch 'spi-5.2' into spi-next (2019-05-02 11:20:29 +0900)

----------------------------------------------------------------
spi: Updates for v5.2

One small feature was added this release but the bulk of the diffstat
and the changelog comes from the fact that several older drivers got
some fairly hefty reworks and a couple of new drivers were added:

- Support for detailed control of timing around chip selects from
Sowjanya Komatineni.
- A big set of fixes and imrovements for the Tegra114 driver from
Sowjanya Komatineni.
- A big simplification of the GPIO driver from Andrey Smirnov.
- DMA support and fixes for the Freescale LPSPI driver from Clark Wang.
- Fixes and optimizations for the bcm2835aux from Martin Sparl.
- New drivers for Mediatek MT7621 (graduated from staging) and Zynq QSPI.

----------------------------------------------------------------
Aditya Pakki (1):
spi : spi-topcliff-pch: Fix to handle empty DMA buffers

Andrey Smirnov (12):
spi: gpio: Drop unused spi_to_pdata()
spi: gpio: Add local struct device pointer in spi_gpio_probe()
spi: gpio: Add local struct spi_bitbang pointer in spi_gpio_probe()
spi: gpio: Simplify SPI_MASTER_NO_TX check in spi_gpio_probe()
spi: gpio: Drop unused pdata copy in struct spi_gpio
spi: gpio: Don't request CS GPIO in DT use-case
spi: Don't call spi_get_gpio_descs() before device name is set
spi: gpio: Drop mflags argument from spi_gpio_request()
spi: gpio: Drop unused pdev field in struct spi_gpio
spi: gpio: Make sure spi_master_put() is called in every error path
spi: bitbang: Introduce spi_bitbang_init()
spi: gpio: Use devm_spi_register_master()

Andy Shevchenko (3):
spi: pxa2xx-pci: Drop unused header inclusion
spi: pxa2xx: Introduce DMA burst size support
spi: pxa2xx: Debug print DMA burst size

Arnd Bergmann (3):
spi: work around clang bug in SPI_BPW_RANGE_MASK()
spi: fix SPI_BPW_RANGE_MASK() regression
spi: export tracepoint symbols to modules

Axel Lin (4):
spi: at91-usart: Remove duplicated checking for spi->bits_per_word
spi: fsl-lpspi: Fix problematic dev_set_drvdata call
spi: fsl-lpspi: Fix build warning when !CONFIG_PM
spi: fsl-lpspi: Clean up fsl_lpspi_probe

Cao Van Dong (1):
spi: sh-msiof: Document r8a77470 bindings

Cezary Gapinski (1):
spi: pic32: fix dma channels termination

Chris Lesiak (1):
spi: Fix zero length xfer bug

Clark Wang (9):
spi: lpspi: Add i.MX8 boards support for lpspi
doc: lpspi: Document DT bindings for LPSPI clocks
spi: lpspi: add the error info of transfer speed setting
spi: lpspi: use the core way to implement cs-gpio function
spi: lpspi: add dma mode support
spi: lpspi: Add the missing NULL check
spi: lpspi: Code cleanup
spi: lpspi: fix dataloss when SS is inactivated between every words
spi: lpspi: add missing complete in abort func at dma mode

Claudiu Beznea (1):
spi: atmel-quadspi: fix crash while suspending

Daniel Gomez (1):
spi: AD ASoC: declare missing of table

Evan Green (1):
spi: pxa2xx: Add support for Intel Comet Lake

Fabien Dessenne (2):
spi: stm32-qspi: manage the get_irq error case
spi: stm32: return the get_irq error

Flavio Suligoi (3):
spi: pxa2xxx: change "no DMA channels..." msg from debug to warning
spi: pxa2xx: use a module softdep for dw_dmac
spi: pxa2xx: fix SCR (divisor) calculation

Gareth Williams (1):
dt-bindings: snps,dw-apb-ssi: Add optional clock bindings documentation

Geert Uytterhoeven (8):
spi: rspi: Fix register initialization while runtime-suspended
spi: rspi: Fix sequencer reset during initialization
spi: sh-msiof: Use BIT() and GENMASK()
spi: sh-msiof: Use readl_poll_timeout_atomic() instead of open-coding
spi: sh-msiof: Add reset of registers before starting transfer
spi: spi-gpio: Remove spi->controller_data comment
spi: Add missing error handling for CS GPIOs
spi: sh-msiof: Convert to use GPIO descriptors

Han Xu (1):
spi: lpspi: enable runtime pm for lpspi

Hoan Nguyen An (1):
spi: rspi: Fix handling of QSPI code when transmit and receive

Jan Kundrát (2):
spi: spidev: Enable control of inter-word delays
spi: orion: Support spi_xfer->word_delay_usecs

Jarkko Nikula (3):
spi: pxa2xx: Use struct spi_device directly in pxa2xx_spi_transfer_one()
spi: pxa2xx: Unify remaing prints in pxa2xx_spi_transfer_one()
spi: Remove one needless transfer speed fall back case

Leilk Liu (1):
dt-bindings: spi: spi-mt65xx: add support for MT8516

Linus Walleij (1):
spi: ep93xx: Convert to use CS GPIO descriptors

Ludovic Barre (4):
spi: spi-mem: stm32-qspi: avoid memory corruption at low frequency
spi: spi-mem: stm32-qspi: add suspend/resume support
spi: stm32-qspi: add spi_master_put in release function
spi: stm32-qspi: add dma support

Mark Brown (5):
Merge branch 'spi-5.1' into spi-5.2 for stm32
Merge tag 'v5.1-rc1' into spi-5.2
Merge branch 'spi-5.1' into spi-5.2
Merge branch 'spi-5.1' into spi-linus
Merge branch 'spi-5.2' into spi-next

Martin Sperl (9):
spi: bcm2835aux: unifying code between polling and interrupt driven code
spi: bcm2835aux: remove dangerous uncontrolled read of fifo
spi: bcm2835aux: fix corruptions for longer spi transfers
spi: bcm2835aux: remove dead code
spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios
spi: bcm2835aux: warn in dmesg that native cs is not really supported
spi: bcm2835aux: setup gpio-cs to output and correct level during setup
spi: bcm2835aux: make the polling duration limits configurable
spi: bcm2835aux: add driver stats to debugfs

Meghana Madhyastha (1):
spi/spi-bcm2835: Split transfers that exceed DLEN

Naga Sureshkumar Relli (4):
spi: spi-mem: export spi_mem_default_supports_op()
dt-bindings: spi: Add device tree binding documentation for Zynq QSPI controller
spi: spi-mem: Add support for Zynq QSPI controller
spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl

Noralf Trønnes (3):
spi: Remove warning in spi_split_transfers_maxsize()
spi: Release spi_res after finalizing message
spi/trace: Cap buffer contents at 64 bytes

Phil Edworthy (2):
dt-bindings: snps,dw-apb-ssi: Add mandatory clock bindings documentation
spi: dw: Add support for an optional interface clock

Randolph Maaßen (1):
spi: tegra20-slink: change chip select action order

Rasmus Villemoes (5):
spi: spi-fsl-spi: support use of the SPISEL_BOOT signal on MPC8309
spi: spi-fsl-spi: remove always-true conditional in fsl_spi_do_one_msg
spi: spi-fsl-spi: relax message sanity checking a little
spi: spi-fsl-spi: allow changing bits_per_word while CS is still active
spi: spi-fsl-spi: automatically adapt bits-per-word in cpu mode

Serge Semin (1):
spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select

Sergei Shtylyov (2):
spi: kill useless initializer in spi_register_controller()
spi-mem: fix kernel-doc for spi_mem_dirmap_{read|write}()

Sowjanya Komatineni (22):
spi: tegra114: clear packed bit for unpacked mode
spi: tegra114: fix for unpacked mode transfers
spi: tegra114: terminate dma and reset on transfer timeout
spi: tegra114: flush fifos
spi: tegra114: configure dma burst size to fifo trig level
spi: tegra114: reset controller on probe
spi: tegra114: use packed mode for 32 bits per word
spi: tegra114: add SPI_LSB_FIRST support
spi: tegra114: de-assert CS before SPI mode change
spi: tegra114: avoid reset call in atomic context
spi: tegra114: dump SPI registers during timeout
spi: tegra114: set supported bits per word
spi: tegra114: use unpacked mode for below 4 bytes
spi: tegra114: set bus number based on id
spi: tegra114: add dual mode support
spi: tegra114: add 3 wire transfer mode support
spi: tegra114: add support for interrupt mask
spi-summary: document set_cs_timing
spi: add a method for configuring CS timing
spi: document tx/rx clock delay properties
spi: expand mode support
spi: tegra114: fix PIO transfer

Stefan Roese (1):
spi: mt7621: Move SPI driver out of staging

Trent Piepho (2):
spi: imx: add module parameter to control DMA use
spi: imx: stop buffer overflow in RX FIFO flush

Volker Haspel (1):
spi: spi-fsl-qspi: use devm_spi_register_controller

Wolfram Sang (1):
spi: mxic: simplify getting .driver_data

YueHaibing (4):
spi: atmel-quadspi: Make atmel_qspi_get_name static
spi: bcm2835aux: Fix build error without CONFIG_DEBUG_FS
spi: spi-mem: Fix build error without CONFIG_SPI_MEM
spi: spi-mem: Make spi_mem_default_supports_op() static inline

kbuild test robot (3):
spi: lpspi: fsl_lpspi_runtime_resume() can be static
spi: spi-mem: stm32-qspi: stm32_qspi_pm_ops can be static
spi: bcm2835aux: polling_limit_us can be static

Documentation/devicetree/bindings/spi/fsl-spi.txt | 4 +
.../bindings/spi/nvidia,tegra114-spi.txt | 20 +
Documentation/devicetree/bindings/spi/sh-msiof.txt | 1 +
.../devicetree/bindings/spi/snps,dw-apb-ssi.txt | 10 +-
.../devicetree/bindings/spi/spi-fsl-lpspi.txt | 10 +-
.../devicetree/bindings/spi/spi-mt65xx.txt | 1 +
.../devicetree/bindings/spi/spi-mt7621.txt | 26 +
.../devicetree/bindings/spi/spi-zynq-qspi.txt | 25 +
Documentation/spi/spi-summary | 6 +
arch/arm/mach-ep93xx/edb93xx.c | 13 +-
arch/arm/mach-ep93xx/simone.c | 11 +-
arch/arm/mach-ep93xx/ts72xx.c | 25 +-
arch/arm/mach-ep93xx/vision_ep9307.c | 15 +-
arch/sh/boards/mach-ecovec24/setup.c | 12 +-
drivers/spi/Kconfig | 16 +-
drivers/spi/Makefile | 2 +
drivers/spi/atmel-quadspi.c | 8 +-
drivers/spi/spi-at91-usart.c | 8 +-
drivers/spi/spi-bcm2835.c | 39 +-
drivers/spi/spi-bcm2835aux.c | 205 ++++--
drivers/spi/spi-bitbang.c | 66 +-
drivers/spi/spi-dw-mmio.c | 12 +
drivers/spi/spi-ep93xx.c | 32 +-
drivers/spi/spi-fsl-lib.h | 2 +
drivers/spi/spi-fsl-lpspi.c | 573 ++++++++++++++--
drivers/spi/spi-fsl-qspi.c | 2 +-
drivers/spi/spi-fsl-spi.c | 81 ++-
drivers/spi/spi-gpio.c | 227 +++---
drivers/spi/spi-imx.c | 9 +-
drivers/spi/spi-mem.c | 8 +-
drivers/{staging/mt7621-spi => spi}/spi-mt7621.c | 83 ++-
drivers/spi/spi-mxic.c | 6 +-
drivers/spi/spi-orion.c | 4 +
drivers/spi/spi-pic32.c | 2 +-
drivers/spi/spi-pxa2xx-dma.c | 4 +-
drivers/spi/spi-pxa2xx-pci.c | 5 +-
drivers/spi/spi-pxa2xx.c | 38 +-
drivers/spi/spi-rspi.c | 119 ++--
drivers/spi/spi-sh-msiof.c | 224 +++---
drivers/spi/spi-stm32-qspi.c | 229 ++++++-
drivers/spi/spi-stm32.c | 5 +-
drivers/spi/spi-tegra114.c | 310 +++++++--
drivers/spi/spi-tegra20-slink.c | 12 +-
drivers/spi/spi-topcliff-pch.c | 15 +-
drivers/spi/spi-zynq-qspi.c | 761 +++++++++++++++++++++
drivers/spi/spi.c | 76 +-
drivers/spi/spidev.c | 4 +-
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/mt7621-spi/Kconfig | 6 -
drivers/staging/mt7621-spi/Makefile | 1 -
drivers/staging/mt7621-spi/TODO | 5 -
include/linux/platform_data/spi-ep93xx.h | 4 -
include/linux/spi/pxa2xx_spi.h | 1 +
include/linux/spi/spi-mem.h | 12 +
include/linux/spi/spi.h | 24 +-
include/linux/spi/spi_bitbang.h | 1 +
include/trace/events/spi.h | 10 +-
include/uapi/linux/spi/spidev.h | 6 +-
sound/soc/codecs/adau1977-spi.c | 11 +
60 files changed, 2650 insertions(+), 800 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/spi-mt7621.txt
create mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
rename drivers/{staging/mt7621-spi => spi}/spi-mt7621.c (88%)
create mode 100644 drivers/spi/spi-zynq-qspi.c
delete mode 100644 drivers/staging/mt7621-spi/Kconfig
delete mode 100644 drivers/staging/mt7621-spi/Makefile
delete mode 100644 drivers/staging/mt7621-spi/TODO

Attachment: signature.asc
Description: PGP signature