Re: [PATCH] dmaengine: stm32-dma: fix residue calculation in stm32-dma

From: Arnaud Pouliquen
Date: Tue Apr 23 2019 - 11:19:12 EST


Hello Vinod,

Just a gentle reminder, if you could take a moment to review this patch.
FYI, the patch has already been internally reviewed by Pierre Yves
mordret...
His sign-off is in the commit message.

Thanks,

Arnaud


On 3/27/19 1:21 PM, Arnaud Pouliquen wrote:
> During residue calculation. the DMA can switch to the next sg. When
> this race condition occurs, the residue returned value is not valid.
> Indeed the position in the sg returned by the hardware is the position
> of the next sg, not the current sg.
> Solution is to check the sg after the calculation to verify it.
> If a transition is detected we consider that the DMA has switched to
> the beginning of next sg.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
> ---
> drivers/dma/stm32-dma.c | 70 ++++++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 57 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
> index 4903a40..30309d2 100644
> --- a/drivers/dma/stm32-dma.c
> +++ b/drivers/dma/stm32-dma.c
> @@ -1038,33 +1038,77 @@ static u32 stm32_dma_get_remaining_bytes(struct stm32_dma_chan *chan)
> return ndtr << width;
> }
>
> +static bool stm32_dma_is_current_sg(struct stm32_dma_chan *chan)
> +{
> + struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
> + struct stm32_dma_sg_req *sg_req;
> + u32 dma_scr, dma_smar, id;
> +
> + id = chan->id;
> + dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
> +
> + if (!(dma_scr & STM32_DMA_SCR_DBM))
> + return true;
> +
> + sg_req = &chan->desc->sg_req[chan->next_sg];
> +
> + if (dma_scr & STM32_DMA_SCR_CT) {
> + dma_smar = stm32_dma_read(dmadev, STM32_DMA_SM0AR(id));
> + return (dma_smar == sg_req->chan_reg.dma_sm0ar);
> + }
> +
> + dma_smar = stm32_dma_read(dmadev, STM32_DMA_SM1AR(id));
> +
> + return (dma_smar == sg_req->chan_reg.dma_sm1ar);
> +}
> +
> static size_t stm32_dma_desc_residue(struct stm32_dma_chan *chan,
> struct stm32_dma_desc *desc,
> u32 next_sg)
> {
> u32 modulo, burst_size;
> - u32 residue = 0;
> + u32 residue;
> + u32 n_sg = next_sg;
> + struct stm32_dma_sg_req *sg_req = &chan->desc->sg_req[chan->next_sg];
> int i;
>
> + residue = stm32_dma_get_remaining_bytes(chan);
> +
> /*
> - * In cyclic mode, for the last period, residue = remaining bytes from
> - * NDTR
> + * Calculate the residue means compute the descriptors
> + * information:
> + * - the sg currently transferred
> + * - the remaining position in this sg (NDTR).
> + *
> + * The issue is that a race condition can occur if DMA is
> + * running. DMA can have started to transfer the next sg before
> + * the position in sg is read. In this case the remaing position
> + * can correspond to the new sg position.
> + * The strategy implemented in the stm32 driver is to check the
> + * sg transition. If detected we can not trust the SxNDTR register
> + * value, this register can not be up to date during the transition.
> + * In this case we can assume that the dma is at the beginning of next
> + * sg so we calculate the residue in consequence.
> */
> - if (chan->desc->cyclic && next_sg == 0) {
> - residue = stm32_dma_get_remaining_bytes(chan);
> - goto end;
> +
> + if (!stm32_dma_is_current_sg(chan)) {
> + n_sg++;
> + if (n_sg == chan->desc->num_sgs)
> + n_sg = 0;
> + residue = sg_req->len;
> }
>
> /*
> - * For all other periods in cyclic mode, and in sg mode,
> - * residue = remaining bytes from NDTR + remaining periods/sg to be
> - * transferred
> + * In cyclic mode, for the last period, residue = remaining bytes
> + * from NDTR,
> + * else for all other periods in cyclic mode, and in sg mode,
> + * residue = remaining bytes from NDTR + remaining
> + * periods/sg to be transferred
> */
> - for (i = next_sg; i < desc->num_sgs; i++)
> - residue += desc->sg_req[i].len;
> - residue += stm32_dma_get_remaining_bytes(chan);
> + if (!chan->desc->cyclic || n_sg != 0)
> + for (i = n_sg; i < desc->num_sgs; i++)
> + residue += desc->sg_req[i].len;
>
> -end:
> if (!chan->mem_burst)
> return residue;
>
>