[PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960

From: Yu Chen
Date: Sat Apr 20 2019 - 02:40:59 EST


This patch adds support for usb on Hikey960.

Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Binghui Wang <wangbinghui@xxxxxxxxxxxxx>
Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
---
v2:
* Remove device_type property.
* Add property "usb-role-switch".
v3:
* Make node "usb_phy" a subnode of usb3_otg_bc register.
* Remove property "typec-vbus-enable-val" of hisi_hikey_usb.
v4:
* Remove property "hisilicon,usb3-otg-bc-syscon" of usb-phy.
---
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 53 ++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 73 +++++++++++++++++++++++
2 files changed, 126 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e035cf195b19..d4e11c56b250 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>

/ {
model = "HiKey960";
@@ -196,6 +197,26 @@
method = "smc";
};
};
+
+ hisi_hikey_usb: hisi_hikey_usb {
+ compatible = "hisilicon,hikey960_usb";
+ typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+ otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+ hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbhub5734_pmx_func>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hikey_usb_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch_notify>;
+ };
+ };
+ };
+
};

/*
@@ -526,6 +547,38 @@
&i2c1 {
status = "okay";

+ rt1711h: rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ status = "ok";
+ interrupt-parent = <&gpio27>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_cfg_func>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 1000)>;
+ op-sink-microwatt = <10000000>;
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ };
+ };
+
adv7533: adv7533@39 {
status = "ok";
compatible = "adi,adv7533";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 2f19e0e5b7cf..173467505ada 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -355,6 +355,12 @@
#clock-cells = <1>;
};

+ pmctrl: pmctrl@fff31000 {
+ compatible = "hisilicon,hi3660-pmctrl", "syscon";
+ reg = <0x0 0xfff31000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
pmuctrl: crg_ctrl@fff34000 {
compatible = "hisilicon,hi3660-pmuctrl", "syscon";
reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,72 @@
};
};
};
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy: usb-phy {
+ compatible = "hisilicon,hi3660-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,eye-diagram-param = <0x22466e4>;
+ };
+ };
+
+ usb3: hisi_dwc3 {
+ compatible = "hisilicon,hi3660-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+ assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ assigned-clock-rates = <229000000>;
+ resets = <&crg_rst 0x90 8>,
+ <&crg_rst 0x90 7>,
+ <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 5>;
+
+ dwc3: dwc3@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+ interrupts = <0 159 4>, <0 161 4>;
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ phy_type = "utmi";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,lfps_filter_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,tx_de_emphasis_quirk;
+ snps,tx_de_emphasis = <1>;
+ snps,dis_enblslpm_quirk;
+ snps,gctl-reset-quirk;
+ usb-role-switch;
+ role-switch-default-host;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dwc3_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+
+ dwc3_role_switch_notify: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hikey_usb_ep>;
+ };
+ };
+ };
+ };
};
};
--
2.15.0-rc2