Re: [RESEND PATCH 0/7] Introduce bus domains controller framework

From: Benjamin Gaignard
Date: Fri Apr 19 2019 - 15:59:17 EST


Le lun. 18 mars 2019 Ã 12:05, Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxx> a Ãcrit :
>
> Le lun. 18 mars 2019 Ã 11:43, Sudeep Holla <sudeep.holla@xxxxxxx> a Ãcrit :
> >
> > On Mon, Mar 18, 2019 at 11:05:58AM +0100, Benjamin Gaignard wrote:
> > > Bus domains controllers allow to divided system on chip into multiple domains
> > > that can be used to select by who hardware blocks could be accessed.
> > > A domain could be a cluster of CPUs (or coprocessors), a range of addresses or
> > > a group of hardware blocks.
> > >
> > > Framework architecture is inspirated by pinctrl framework:
> > > - a default configuration could be applied before bind the driver
> > > - configurations could be apllied dynamically by drivers
> > > - device node provides the bus domains configurations
> > >
> > > An example of bus domains controller is STM32 ETZPC hardware block
> > > which got 3 domains:
> > > - secure: hardware blocks are only accessible by software running on trust
> > > zone.
> > > - non-secure: hardware blocks are accessible by non-secure software (i.e.
> > > linux kernel).
> > > - coprocessor: hardware blocks are only accessible by the corpocessor.
> > > Up to 94 hardware blocks of the soc could be managed by ETZPC and
> > > assigned to one of the three domains.
> > >
> >
> > You fail to explain why do we need this in non-secure Linux ?
> > You need to have solid reasons as why this can't be done in secure
> > firmware. And yes I mean even on arm32. On platforms with such hardware
> > capabilities you will need some secure firmware to be running and these
> > things can be done there. I don't want this enabled for ARM64 at all,
> > firmware *has to deal* with this.
>
> We use ETZPC to define if hardware blocks can be used by Cortex A7 or Cortex M4
> (both non-secure) on STM32MP1 SoC, this new framework allow to change hardware
> block split at runtime. This could be done even on non-secure world
> because their is
> nothing critical to change hardware blocks users.
> For example you can do "complex" tasks like display pipe configuration
> on Cortex A7
> where linux is running and handover the control of this hardware block
> to Cortex M4 to
> offload drawing on framebuffer.
>

Gentle ping to get more feedback on this series

Benjamin

> Benjamin
>
> >
> > --
> > Regards,
> > Sudeep