Re: [PATCH V2 1/2] mm/hotplug: Reorder arch_remove_memory() call in __remove_memory()

From: Anshuman Khandual
Date: Tue Apr 16 2019 - 06:12:53 EST




On 04/15/2019 07:28 PM, David Hildenbrand wrote:
> On 14.04.19 07:59, Anshuman Khandual wrote:
>> Memory hot remove uses get_nid_for_pfn() while tearing down linked sysfs
>> entries between memory block and node. It first checks pfn validity with
>> pfn_valid_within() before fetching nid. With CONFIG_HOLES_IN_ZONE config
>> (arm64 has this enabled) pfn_valid_within() calls pfn_valid().
>>
>> pfn_valid() is an arch implementation on arm64 (CONFIG_HAVE_ARCH_PFN_VALID)
>> which scans all mapped memblock regions with memblock_is_map_memory(). This
>> creates a problem in memory hot remove path which has already removed given
>> memory range from memory block with memblock_[remove|free] before arriving
>> at unregister_mem_sect_under_nodes(). Hence get_nid_for_pfn() returns -1
>> skipping subsequent sysfs_remove_link() calls leaving node <-> memory block
>> sysfs entries as is. Subsequent memory add operation hits BUG_ON() because
>> of existing sysfs entries.
>>
>> [ 62.007176] NUMA: Unknown node for memory at 0x680000000, assuming node 0
>> [ 62.052517] ------------[ cut here ]------------
>> [ 62.053211] kernel BUG at mm/memory_hotplug.c:1143!
>> [ 62.053868] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
>> [ 62.054589] Modules linked in:
>> [ 62.054999] CPU: 19 PID: 3275 Comm: bash Not tainted 5.1.0-rc2-00004-g28cea40b2683 #41
>> [ 62.056274] Hardware name: linux,dummy-virt (DT)
>> [ 62.057166] pstate: 40400005 (nZcv daif +PAN -UAO)
>> [ 62.058083] pc : add_memory_resource+0x1cc/0x1d8
>> [ 62.058961] lr : add_memory_resource+0x10c/0x1d8
>> [ 62.059842] sp : ffff0000168b3ce0
>> [ 62.060477] x29: ffff0000168b3ce0 x28: ffff8005db546c00
>> [ 62.061501] x27: 0000000000000000 x26: 0000000000000000
>> [ 62.062509] x25: ffff0000111ef000 x24: ffff0000111ef5d0
>> [ 62.063520] x23: 0000000000000000 x22: 00000006bfffffff
>> [ 62.064540] x21: 00000000ffffffef x20: 00000000006c0000
>> [ 62.065558] x19: 0000000000680000 x18: 0000000000000024
>> [ 62.066566] x17: 0000000000000000 x16: 0000000000000000
>> [ 62.067579] x15: ffffffffffffffff x14: ffff8005e412e890
>> [ 62.068588] x13: ffff8005d6b105d8 x12: 0000000000000000
>> [ 62.069610] x11: ffff8005d6b10490 x10: 0000000000000040
>> [ 62.070615] x9 : ffff8005e412e898 x8 : ffff8005e412e890
>> [ 62.071631] x7 : ffff8005d6b105d8 x6 : ffff8005db546c00
>> [ 62.072640] x5 : 0000000000000001 x4 : 0000000000000002
>> [ 62.073654] x3 : ffff8005d7049480 x2 : 0000000000000002
>> [ 62.074666] x1 : 0000000000000003 x0 : 00000000ffffffef
>> [ 62.075685] Process bash (pid: 3275, stack limit = 0x00000000d754280f)
>> [ 62.076930] Call trace:
>> [ 62.077411] add_memory_resource+0x1cc/0x1d8
>> [ 62.078227] __add_memory+0x70/0xa8
>> [ 62.078901] probe_store+0xa4/0xc8
>> [ 62.079561] dev_attr_store+0x18/0x28
>> [ 62.080270] sysfs_kf_write+0x40/0x58
>> [ 62.080992] kernfs_fop_write+0xcc/0x1d8
>> [ 62.081744] __vfs_write+0x18/0x40
>> [ 62.082400] vfs_write+0xa4/0x1b0
>> [ 62.083037] ksys_write+0x5c/0xc0
>> [ 62.083681] __arm64_sys_write+0x18/0x20
>> [ 62.084432] el0_svc_handler+0x88/0x100
>> [ 62.085177] el0_svc+0x8/0xc
>>
>> Re-ordering arch_remove_memory() with memblock_[free|remove] solves the
>> problem on arm64 as pfn_valid() behaves correctly and returns positive
>> as memblock for the address range still exists. arch_remove_memory()
>> removes applicable memory sections from zone with __remove_pages() and
>> tears down kernel linear mapping. Removing memblock regions afterwards
>> is safe because there is no other memblock (bootmem) allocator user that
>> late. So nobody is going to allocate from the removed range just to blow
>> up later. Also nobody should be using the bootmem allocated range else
>> we wouldn't allow to remove it. So reordering is indeed safe.
>>
>> Acked-by: Michal Hocko <mhocko@xxxxxxxx>
>> Reviewed-by: David Hildenbrand <david@xxxxxxxxxx>
>> Reviewed-by: Oscar Salvador <osalvador@xxxxxxx>
>> Signed-off-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
>> ---
>> mm/memory_hotplug.c | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>> index 0082d69..71d0d79 100644
>> --- a/mm/memory_hotplug.c
>> +++ b/mm/memory_hotplug.c
>> @@ -1872,11 +1872,10 @@ void __ref __remove_memory(int nid, u64 start, u64 size)
>>
>> /* remove memmap entry */
>> firmware_map_remove(start, start + size, "System RAM");
>> + arch_remove_memory(nid, start, size, NULL);
>> memblock_free(start, size);
>> memblock_remove(start, size);
>>
>> - arch_remove_memory(nid, start, size, NULL);
>> -
>> try_offline_node(nid);
>>
>> mem_hotplug_done();
>>
>
> This will conflict with a patch I posted, but should be easy
> to fix. We should stick to the reverse order in which things are added,
> which is what you are doing here.
>
> commit 5af92d15e179557143d54bde477f7e45fc5c0fca
> Author: David Hildenbrand <david@xxxxxxxxxx>
> Date: Wed Apr 10 11:02:26 2019 +1000
>
> mm/memory_hotplug: release memory resource after arch_remove_memory()
>

Got it. My current WIP branch is on the following. We should be able to fix
it during merge.

git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/core