Re: [v2,1/2] drm: Add writeback_w,h properties

From: Liviu Dudau
Date: Tue Apr 16 2019 - 05:17:03 EST


On Tue, Apr 16, 2019 at 09:34:20AM +0200, Daniel Vetter wrote:
> On Mon, Apr 15, 2019 at 10:20:45AM +0100, Liviu Dudau wrote:
> > On Mon, Apr 15, 2019 at 08:59:30AM +0100, james qian wang (Arm Technology China) wrote:
> > > On Fri, Apr 12, 2019 at 02:08:28PM +0000, Ben Davis wrote:
> > > > Add new properties to specify width and height for writeback.
> > > >
> > > > Signed-off-by: Ben Davis <ben.davis@xxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/drm_atomic_uapi.c | 8 ++++++++
> > > > drivers/gpu/drm/drm_writeback.c | 28 ++++++++++++++++++++++++++++
> > > > include/drm/drm_connector.h | 4 ++++
> > > > include/drm/drm_mode_config.h | 10 ++++++++++
> > > > 4 files changed, 50 insertions(+)
> > > >
> > > > --
> > > > 2.7.4
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> > > > index d520a04..1f68dce 100644
> > > > --- a/drivers/gpu/drm/drm_atomic_uapi.c
> > > > +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> > > > @@ -765,6 +765,10 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
> > > > return -EINVAL;
> > > > }
> > > > state->content_protection = val;
> > > > + } else if (property == config->prop_writeback_w) {
> > > > + state->writeback_w = val;
> > > > + } else if (property == config->prop_writeback_h) {
> > > > + state->writeback_h = val;
> > > > } else if (property == config->writeback_fb_id_property) {
> > > > struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
> > > > int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
> > > > @@ -837,6 +841,10 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
> > > > *val = state->scaling_mode;
> > > > } else if (property == connector->content_protection_property) {
> > > > *val = state->content_protection;
> > > > + } else if (property == config->prop_writeback_w) {
> > > > + *val = state->writeback_w;
> > > > + } else if (property == config->prop_writeback_h) {
> > > > + *val = state->writeback_h;
> > > > } else if (property == config->writeback_fb_id_property) {
> > > > /* Writeback framebuffer is one-shot, write and forget */
> > > > *val = 0;
> > > > diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c
> > > > index c20e6fe..3d0453e 100644
> > > > --- a/drivers/gpu/drm/drm_writeback.c
> > > > +++ b/drivers/gpu/drm/drm_writeback.c
> > > > @@ -74,6 +74,12 @@
> > > > * applications making use of writeback connectors *always* retrieve an
> > > > * out-fence for the commit and use it appropriately.
> > > > * From userspace, this property will always read as zero.
> > > > + *
> > > > + * "WRITEBACK_W":
> > > > + * The width of the writeback buffer to write back. 0 acts as default.
> > > > + *
> > > > + * "WRITEBACK_H":
> > > > + * The height of the writeback buffer to write back. 0 acts as default.
> > > > */
> > > >
> > > > #define fence_to_wb_connector(x) container_of(x->lock, \
> > > > @@ -141,6 +147,22 @@ static int create_writeback_properties(struct drm_device *dev)
> > > > dev->mode_config.writeback_out_fence_ptr_property = prop;
> > > > }
> > > >
> > > > + if (!dev->mode_config.prop_writeback_w) {
> > > > + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> > > > + "WRITEBACK_W", 1, UINT_MAX);
> > > > + if (!prop)
> > > > + return -ENOMEM;
> > > > + dev->mode_config.prop_writeback_w = prop;
> > > > + }
> > > > +
> > > > + if (!dev->mode_config.prop_writeback_h) {
> > > > + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> > > > + "WRITEBACK_H", 1, UINT_MAX);
> > > > + if (!prop)
> > > > + return -ENOMEM;
> > > > + dev->mode_config.prop_writeback_h = prop;
> > > > + }
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > @@ -225,6 +247,12 @@ int drm_writeback_connector_init(struct drm_device *dev,
> > > > drm_object_attach_property(&connector->base,
> > > > config->writeback_pixel_formats_property,
> > > > blob->base.id);
> > > > +
> > > > + drm_object_attach_property(&connector->base,
> > > > + config->prop_writeback_w, 0);
> > > > + drm_object_attach_property(&connector->base,
> > > > + config->prop_writeback_h, 0);
> > >
> > > Hi Ben:
> > > Do we real need these two individual properties for specifing the writeback
> > > w/h, can we use fb->w/h ?
> > > And since these two properties are added as common and standard properties,
> > > it influnce all existing write-back implementation which all assumed
> > > writeback size as fb->w/h.
> >
> > The idea of having these additional properties was to maintain backwards
> > compatibility (of some sort). If you don't set writeback_w/h then the
> > assumption is that they are the same as fb->w/h, but I can see how it's
> > going to be confusing to have fb->w/h different from crtc->w/h and
> > different from writeback_w/h.
>
> Since we already have crtc_w/h independent of writeback_fb_w/h, do we need
> another set of w/h? Are all the interactions between these tree
> well-defined?

No, we probably don't need another set of w/h values. As for the
interaction, I propose the following:

- writeback is only attached to a connector, so the crtc_x/y/w/h are the
"input source" parameters into the writeback. Given that we put in the
writeback the content of the CRTC, I suggest we ignore x,y (consider
them to be always 0 for the writeback output).

- writeback has a framebuffer attached, so we can use the fb->w/h to
determine if we need to do any scaling of the output.

>
> Atm I'm assuming that writeback is using crtc_w/h into the fb, at offset
> 0, not scaled any further. But the planes themselves can be scaled into
> the crtc_w/h window ofc.

Our hardware has the ability to also write back one of the planes and
scale it during writeback, but we have no way of expressing that in DRM
via connectors, so we are going to ignore that case. The supported usecase
is for the planes to be scaled into the "composition" area which is the size
of the CRTC, and then writeback that to memory, possibly with scaling (we
officially only going to support downscaling due to external dependencies
on the memory clock that is needed for supporting upscaling).

Best regards,

Liviu


>
> Iirc the hw supporting writeback thus far needs a dedicated crtc for
> writeback, so adding yet another scaling window is not needed?
> -Daniel
>
> > > To compatible with existing writeback support, I suggest to keep to
> > > use fb->w/h or add these properties as malidp private.
> >
> > We don't need to make them malidp private, there is nothing malidp
> > specific in them. I'll talk with Ben, we should probably drop this patch
> > entirely and just enable malidp scaling when fb->w/h differ from
> > crtc->w/h.
> >
> > Best regards,
> > Liviu
> >
> >
> > >
> > > Thanks
> > > James
> > >
> > >
> > > > wb_connector->pixel_formats_blob_ptr = blob;
> > > >
> > > > return 0;
> > > > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > > > index 8fe22ab..51c4cb2 100644
> > > > --- a/include/drm/drm_connector.h
> > > > +++ b/include/drm/drm_connector.h
> > > > @@ -515,6 +515,10 @@ struct drm_connector_state {
> > > > */
> > > > struct drm_writeback_job *writeback_job;
> > > >
> > > > + /** @writeback_w: width of plane to write to wb buffer */
> > > > + /** @writeback_h: height of plane to write to wb buffer */
> > > > + uint32_t writeback_w, writeback_h;
> > > > +
> > > > /**
> > > > * @max_requested_bpc: Connector property to limit the maximum bit
> > > > * depth of the pixels.
> > > > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > > > index 7f60e8e..a0c2133 100644
> > > > --- a/include/drm/drm_mode_config.h
> > > > +++ b/include/drm/drm_mode_config.h
> > > > @@ -622,6 +622,16 @@ struct drm_mode_config {
> > > > */
> > > > struct drm_property *prop_crtc_h;
> > > > /**
> > > > + * @prop_writeback_w: Writeback connector property for the plane
> > > > + * destination position in the writeback buffer.
> > > > + */
> > > > + struct drm_property *prop_writeback_w;
> > > > + /**
> > > > + * @prop_writeback_h: Writeback connector property for the plane
> > > > + * destination position in the writeback buffer.
> > > > + */
> > > > + struct drm_property *prop_writeback_h;
> > > > + /**
> > > > * @prop_fb_id: Default atomic plane property to specify the
> > > > * &drm_framebuffer.
> > > > */
> > >
> > > Pls del this window style line ending
> > >
> >
> > --
> > ====================
> > | I would like to |
> > | fix the world, |
> > | but they're not |
> > | giving me the |
> > \ source code! /
> > ---------------
> > Â\_(ã)_/Â
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch

--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
Â\_(ã)_/Â