[PATCH 5/5] mmc: mtk-sd: enable internal write-protect logic.

[NeilBrown]

The mtk-sd silicon has integrated write-protect detection logic.

If the sdhci isn't marked no-write-protect and doesn't have a
ro-gpio configured, assume the internal wp logic should be used.

Signed-off-by: NeilBrown <neil@xxxxxxxxxx>
---
 drivers/mmc/host/mtk-sd.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 341cf5f03429..d63d6b62f49a 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -433,6 +433,7 @@ struct msdc_host {
 				 /* cmd response sample selection for HS400 */
 	bool hs400_mode;	/* current eMMC will run at hs400 mode */
 	bool internal_cd;	/* Use internal card-detect logic */
+	bool internal_ro;	/* Use internal write-protect logic */
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
 	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
@@ -2119,12 +2120,30 @@ static int msdc_get_cd(struct mmc_host *mmc)
 		return !val;
 }
 
+static int msdc_get_ro(struct mmc_host *mmc)
+{
+	struct msdc_host *host = mmc_priv(mmc);
+	int val;
+
+	if (mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT)
+		return 0;
+
+	if (!host->internal_ro)
+		return mmc_gpio_get_ro(mmc);
+
+	val = readl(host->base + MSDC_PS) & MSDC_PS_WP;
+	if (mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH)
+		return !!val;
+	else
+		return !val;
+}
+
 static const struct mmc_host_ops mt_msdc_ops = {
 	.post_req = msdc_post_req,
 	.pre_req = msdc_pre_req,
 	.request = msdc_ops_request,
 	.set_ios = msdc_ops_set_ios,
-	.get_ro = mmc_gpio_get_ro,
+	.get_ro = msdc_get_ro,
 	.get_cd = msdc_get_cd,
 	.enable_sdio_irq = msdc_enable_sdio_irq,
 	.ack_sdio_irq = msdc_ack_sdio_irq,
@@ -2256,6 +2275,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		host->internal_cd = true;
 	}
 
+	if (!(mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT) &&
+	    !mmc_can_gpio_ro(mmc)) {
+		/*
+		 * Has write-protect but no GPIO declared, so
+		 * use internal functionality.
+		 */
+		host->internal_ro = true;
+	}
+
 	msdc_of_property_parse(pdev, host);
 
 	host->dev = &pdev->dev;