Re: [PATCH v1 1/2] dt-binding: misc: Add common LPC snoop documentation

From: Andrew Jeffery
Date: Mon Apr 15 2019 - 21:04:56 EST




On Mon, 15 Apr 2019, at 21:51, Tomer Maimon wrote:
> Added device tree binding documentation for Nuvoton BMC
> NPCM BIOS Post Code (BPC) and Apeed AST2500 LPC snoop.
> The LPC snoop monitoring two configurable I/O addresses
> written by the host on Low Pin Count (LPC) bus.
>
> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> ---
> .../devicetree/bindings/misc/lpc-snoop.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/lpc-snoop.txt
>
> diff --git a/Documentation/devicetree/bindings/misc/lpc-snoop.txt
> b/Documentation/devicetree/bindings/misc/lpc-snoop.txt
> new file mode 100644
> index 000000000000..7deac244ef9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/lpc-snoop.txt
> @@ -0,0 +1,27 @@
> +LPC snoop interface
> +
> +The LPC snoop (BIOS Post Code) interface can monitor
> +two configurable I/O addresses written by the host on
> +the Low Pin Count (LPC) bus.

Wrapping looks kind of odd and there's a missing newline at the
end of the file, but for the content:

Reviewed-by: Andrew Jeffery <andrew@xxxxxxxx>

> +
> +Nuvoton NPCM7xx LPC snoop supports capture double words,
> +when using capture double word only I/O address 1 is monitored.
> +
> +Required properties for lpc-snoop node
> +- compatible : "nuvoton,npcm750-lpc-bpc-snoop" for Poleg NPCM7XX
> + "aspeed,ast2500-lpc-snoop" for Aspeed AST2500.
> +- reg : specifies physical base address and size of the
> registers.
> +- interrupts : contain the LPC snoop interrupt with flags for
> falling edge.
> +- snoop-ports : contain monitor I/O addresses, at least one monitor
> I/O
> + address required
> +
> +Optional property for NPCM7xx lpc-snoop node
> +- nuvoton,lpc-en-dwcapture : enable capture double words support.
> +
> +Example:
> + lpc-snoop: lpc_snoop@f0007040 {
> + compatible = "nuvoton,npcm750-lpc-bpc-snoop";
> + reg = <0xf0007040 0x14>;
> + snoop-ports = <0x80>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> \ No newline at end of file
> --
> 2.14.1
>
>