Re: [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log

[Vivek Gautam]

On 4/15/2019 3:11 PM, Robin Murphy wrote:
> On 15/04/2019 09:07, Vivek Gautam wrote:
> > Extract the SID and add the information to context fault log.
> > This is specially useful in a distributed smmu architecture
> > where multiple masters are connected to smmu. SID information
> > helps to quickly identify the faulting master device.
>
> Hmm, given how it's UNKNOWN for translation faults, which are arguably 
> the most likely context fault, I reckon it probably makes more sense 
> to just dump the raw register value for the user to interpret, as we 
> do for fsr/fsynr.


Thanks Robin. Sure will update it to dump the raw register value.

Regards
Vivek

> Robin.
>
> > Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> > ---
> > Â drivers/iommu/arm-smmu-regs.h |Â 4 ++++
> > Â drivers/iommu/arm-smmu.cÂÂÂÂÂ | 14 ++++++++++++--
> > Â 2 files changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iommu/arm-smmu-regs.h 
> > b/drivers/iommu/arm-smmu-regs.h
> > index a1226e4ab5f8..e5be0344b610 100644
> > --- a/drivers/iommu/arm-smmu-regs.h
> > +++ b/drivers/iommu/arm-smmu-regs.h
> > @@ -147,6 +147,10 @@ enum arm_smmu_s2cr_privcfg {
> > Â #define CBAR_IRPTNDX_SHIFTÂÂÂÂÂÂÂ 24
> > Â #define CBAR_IRPTNDX_MASKÂÂÂÂÂÂÂ 0xff
> > Â +#define ARM_SMMU_GR1_CBFRSYNRA(n)ÂÂÂ (0x400 + ((n) << 2))
> > +#define CBFRSYNRA_V2_SID_MASKÂÂÂÂÂÂÂ 0xffff
> > +#define CBFRSYNRA_V1_SID_MASKÂÂÂÂÂÂÂ 0x7fff
> > +
> > Â #define ARM_SMMU_GR1_CBA2R(n)ÂÂÂÂÂÂÂ (0x800 + ((n) << 2))
> > Â #define CBA2R_RW64_32BITÂÂÂÂÂÂÂ (0 << 0)
> > Â #define CBA2R_RW64_64BITÂÂÂÂÂÂÂ (1 << 0)
> > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> > index 045d93884164..aa3426dc68d0 100644
> > --- a/drivers/iommu/arm-smmu.c
> > +++ b/drivers/iommu/arm-smmu.c
> > @@ -575,7 +575,10 @@ static irqreturn_t arm_smmu_context_fault(int 
> > irq, void *dev)
> > ÂÂÂÂÂ struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> > ÂÂÂÂÂ struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> > ÂÂÂÂÂ struct arm_smmu_device *smmu = smmu_domain->smmu;
> > +ÂÂÂ void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
> > ÂÂÂÂÂ void __iomem *cb_base;
> > +ÂÂÂ u32 cbfrsynra;
> > +ÂÂÂ u16 sid;
> > Â ÂÂÂÂÂ cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
> > ÂÂÂÂÂ fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
> > @@ -586,9 +589,16 @@ static irqreturn_t arm_smmu_context_fault(int 
> > irq, void *dev)
> > ÂÂÂÂÂ fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
> > ÂÂÂÂÂ iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
> > Â +ÂÂÂ cbfrsynra = readl_relaxed(gr1_base +
> > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
> > +ÂÂÂ if (smmu->version > ARM_SMMU_V1)
> > +ÂÂÂÂÂÂÂ sid = cbfrsynra & CBFRSYNRA_V2_SID_MASK;
> > +ÂÂÂ else
> > +ÂÂÂÂÂÂÂ sid = cbfrsynra & CBFRSYNRA_V1_SID_MASK;
> > +
> > ÂÂÂÂÂ dev_err_ratelimited(smmu->dev,
> > -ÂÂÂ "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, 
> > cb=%d\n",
> > -ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ fsr, iova, fsynr, cfg->cbndx);
> > +ÂÂÂ "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, 
> > cb=%d sid = %u\n",
> > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ fsr, iova, fsynr, cfg->cbndx, sid);
> > Â ÂÂÂÂÂ writel(fsr, cb_base + ARM_SMMU_CB_FSR);
> > ÂÂÂÂÂ return IRQ_HANDLED;