[PATCH 0/6] musb: Improve performance for hub-attached webcams

From: Matwey V. Kornilov
Date: Wed Apr 03 2019 - 15:26:10 EST


The series is concerned to issues with isochronous transfer while
streaming the USB webcam data. I discovered the issue first time
when attached PWC USB webcam to AM335x-based BeagleBone Black SBC.
It appeared that the root issue was in numerous missed IN requests
during isochronous transfer where each missing leaded to the frame
drop. Since every IN request is triggered in MUSB driver
individually, it is important to queue the send IN request as
earlier as possible when the previous IN completed. At the same
time the URB giveback handler of the device driver has also to be
called there, that leads to arbitrarily delay depending on the
device driver performance. The details with the references are
described in [1].

The issue has two parts:

1) peripheral driver URB callback performance
2) MUSB host driver performance

It appeared that the first part is related to the wrong memory
allocation strategy in the most USB webcam drivers. Non-cached
memory is used in assumption that coherent DMA memory leads to
the better performance than non-coherent memory in conjunction with
the proper synchronization. Yet the assumption might be valid for
x86 platforms some time ago, the issue was fixed for PWC driver in:

1161db6776bd ("media: usb: pwc: Don't use coherent DMA buffers for ISO transfer")

that leads to 3.5x performance gain. The more generic fix for this
common issue are coming for the rest drivers [2].

The patch allowed successfully running full-speed USB PWC webcams
attached directly to BeagleBone Black USB port.

However, the second part of the issue is still present for
peripheral device attached through the high-speed USB hub due to
its 125us frame time. The patch series is intended to reorganize
musb_advance_schedule() to allow host to send IN request quicker.

The patch series is organized as the following. First three patches
improve readability of the existing code in
musb_advance_schedule(). Patches 4 and 5 introduce updated
signature for musb_start_urb(). The last patch introduce new
code-path in musb_advance_schedule() which allows for faster
response.

References:

[1] https://www.spinics.net/lists/linux-usb/msg165735.html
[2] https://www.spinics.net/lists/linux-media/msg144279.html

Matwey V. Kornilov (6):
usb: musb: Use USB_DIR_IN when calling musb_advance_schedule()
usb: musb: Introduce musb_qh_empty() helper function
usb: musb: Introduce musb_qh_free() helper function
usb: musb: Rename musb_start_urb() to musb_start_next_urb()
usb: musb: Introduce musb_start_urb()
usb: musb: Decrease URB starting latency in musb_advance_schedule()

drivers/usb/musb/musb_host.c | 114 +++++++++++++++++++++++++++----------------
1 file changed, 71 insertions(+), 43 deletions(-)

--
2.16.4