Re: [PATCH v2 2/4] rcutree: Add checks for dynticks counters in rcu_is_cpu_rrupt_from_idle

From: Joel Fernandes
Date: Wed Mar 27 2019 - 17:38:51 EST


On Wed, Mar 27, 2019 at 11:44:37AM -0700, Paul E. McKenney wrote:
> On Wed, Mar 27, 2019 at 01:45:45PM -0400, Joel Fernandes wrote:
> > On Wed, Mar 27, 2019 at 08:53:51AM -0700, Paul E. McKenney wrote:
> > > On Wed, Mar 27, 2019 at 11:34:01AM -0400, Joel Fernandes wrote:
> > > > On Tue, Mar 26, 2019 at 07:47:51PM -0700, Paul E. McKenney wrote:
> > > > > On Tue, Mar 26, 2019 at 03:24:09PM -0400, Joel Fernandes (Google) wrote:
> > > > > > In the future we would like to combine the dynticks and dynticks_nesting
> > > > > > counters thus leading to simplifying the code. At the moment we cannot
> > > > > > do that due to concerns about usermode upcalls appearing to RCU as half
> > > > > > of an interrupt. Byungchul tried to do it in [1] but the
> > > > > > "half-interrupt" concern was raised. It is half because, what RCU
> > > > > > expects is rcu_irq_enter() and rcu_irq_exit() pairs when the usermode
> > > > > > exception happens. However, only rcu_irq_enter() is observed. This
> > > > > > concern may not be valid anymore, but at least it used to be the case.
> > > > > >
> > > > > > Out of abundance of caution, Paul added warnings [2] in the RCU code
> > > > > > which if not fired by 2021 may allow us to assume that such
> > > > > > half-interrupt scenario cannot happen any more, which can lead to
> > > > > > simplification of this code.
> > > > > >
> > > > > > Summary of the changes are the following:
> > > > > >
> > > > > > (1) In preparation for this combination of counters in the future, we
> > > > > > first need to first be sure that rcu_rrupt_from_idle cannot be called
> > > > > > from anywhere but a hard-interrupt because previously, the comments
> > > > > > suggested otherwise so let us be sure. We discussed this here [3]. We
> > > > > > use the services of lockdep to accomplish this.
> > > > > >
> > > > > > (2) Further rcu_rrupt_from_idle() is not explicit about how it is using
> > > > > > the counters which can lead to weird future bugs. This patch therefore
> > > > > > makes it more explicit about the specific counter values being tested
> > > > > >
> > > > > > (3) Lastly, we check for counter underflows just to be sure these are
> > > > > > not happening, because the previous code in rcu_rrupt_from_idle() was
> > > > > > allowing the case where the counters can underflow, and the function
> > > > > > would still return true. Now we are checking for specific values so let
> > > > > > us be confident by additional checking, that such underflows don't
> > > > > > happen. Any case, if they do, we should fix them and the screaming
> > > > > > warning is appropriate. All these checks checks are NOOPs if PROVE_RCU
> > > > > > and PROVE_LOCKING are disabled.
> > > > > >
> > > > > > [1] https://lore.kernel.org/patchwork/patch/952349/
> > > > > > [2] Commit e11ec65cc8d6 ("rcu: Add warning to detect half-interrupts")
> > > > > > [3] https://lore.kernel.org/lkml/20190312150514.GB249405@xxxxxxxxxx/
> > > > > >
> > > > > > Cc: byungchul.park@xxxxxxx
> > > > > > Cc: kernel-team@xxxxxxxxxxx
> > > > > > Cc: rcu@xxxxxxxxxxxxxxx
> > > > > > Signed-off-by: Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>
> > > > >
> > > > > Color me stupid:
> > > > >
> > > > > [ 48.845724] ------------[ cut here ]------------
> > > > > [ 48.846619] Not in hardirq as expected
> > > > > [ 48.847322] WARNING: CPU: 5 PID: 34 at /home/git/linux-2.6-tip/kernel/rcu/tree.c:388 rcu_is_cpu_rrupt_from_idle+0xea/0x110
> > > > > [ 48.849302] Modules linked in:
> > > > > [ 48.849869] CPU: 5 PID: 34 Comm: cpuhp/5 Not tainted 5.1.0-rc1+ #1
> > > > > [ 48.850985] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
> > > > > [ 48.852436] RIP: 0010:rcu_is_cpu_rrupt_from_idle+0xea/0x110
> > > > > [ 48.853455] Code: 85 c0 0f 85 59 ff ff ff 80 3d 33 55 68 01 00 0f 85 4c ff ff ff 48 c7 c7 48 d8 cc 8e 31 c0 c6 05 1d 55 68 01 01 e8 66 54 f8 ff <0f> 0b e9 30 ff ff ff 65 48 8b 05 df 58 54 72 48 85 c0 0f 94 c0 0f
> > > > > [ 48.856783] RSP: 0000:ffffbc46802dfdc0 EFLAGS: 00010082
> > > > > [ 48.857735] RAX: 000000000000001a RBX: 0000000000022b80 RCX: 0000000000000000
> > > > > [ 48.859028] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8dac906c
> > > > > [ 48.860313] RBP: ffffbc46802dfe20 R08: 0000000000000001 R09: 0000000000000001
> > > > > [ 48.861607] R10: 000000007d53d16d R11: ffffbc46802dfb48 R12: ffff9e7d7eb62b80
> > > > > [ 48.862898] R13: 0000000000000005 R14: ffffffff8dae2ac0 R15: 00000000000000c9
> > > > > [ 48.864191] FS: 0000000000000000(0000) GS:ffff9e7d7eb40000(0000) knlGS:0000000000000000
> > > > > [ 48.865663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > > [ 48.866702] CR2: 0000000000000000 CR3: 0000000021022000 CR4: 00000000000006e0
> > > > > [ 48.867993] Call Trace:
> > > > > [ 48.868450] rcu_exp_handler+0x35/0x90
> > > > > [ 48.869147] generic_exec_single+0xab/0x100
> > > > > [ 48.869918] ? rcu_barrier+0x240/0x240
> > > > > [ 48.870607] smp_call_function_single+0x8e/0xd0
> > > > > [ 48.871441] rcutree_online_cpu+0x80/0x90
> > > > > [ 48.872181] cpuhp_invoke_callback+0xb5/0x890
> > > > > [ 48.872979] cpuhp_thread_fun+0x172/0x210
> > > > > [ 48.873722] ? cpuhp_thread_fun+0x2a/0x210
> > > > > [ 48.874474] smpboot_thread_fn+0x10d/0x160
> > > > > [ 48.875224] kthread+0xf3/0x130
> > > > > [ 48.875804] ? sort_range+0x20/0x20
> > > > > [ 48.876446] ? kthread_cancel_delayed_work_sync+0x10/0x10
> > > > > [ 48.877445] ret_from_fork+0x3a/0x50
> > > > > [ 48.878124] irq event stamp: 734
> > > > > [ 48.878717] hardirqs last enabled at (733): [<ffffffff8e4f332d>] _raw_spin_unlock_irqrestore+0x2d/0x40
> > > > > [ 48.880402] hardirqs last disabled at (734): [<ffffffff8db0110a>] generic_exec_single+0x9a/0x100
> > > > > [ 48.881986] softirqs last enabled at (0): [<ffffffff8da5feaf>] copy_process.part.56+0x61f/0x2110
> > > > > [ 48.883540] softirqs last disabled at (0): [<0000000000000000>] (null)
> > > > > [ 48.884840] ---[ end trace 00b4c1d2f816f4ed ]---
> > > > >
> > > > > If a CPU invokes generic_exec_single() on itself, the "IPI handler" will
> > > > > be invoked directly, triggering your new lockdep check. Which is a bit
> > > > > wasteful. My thought is to add code to sync_rcu_exp_select_node_cpus()
> > > > > to check the CPU with preemption disabled, avoiding the call to
> > > > > smp_call_function_single() in that case.
> > > > >
> > > > > I have queued all four of your patches, and am trying the fix to
> > > > > the caller of smp_call_function_single() shown below. Thoughts?
> > > >
> > > > Oh interesting. Your fix makes sense. I will go through these paths more as
> > > > well since I'm not super familiar with this area of the RCU code. But I had
> > > > one small nit below.
> > >
> > > Very good, applying that change. I have a similar issue in the CPU-hotplug
> > > code that I will also be fixing.
> > >
> > > Are there other places where I should be using get_cpu()?
> >
> > I will check other usages. I wonder if this path is problematic:
> >
> > rcu_do_batch AIUI can be called from process-context if boost is enabled.
> > In that case rcu_do_batch()-> invoke_rcu_core()-> smp_processor_id() might be
> > problematic. I will double confirm this situation is possible and send a
> > get/put_cpu patch as well if that's the case. Other paths seem to be
> > disabling interrupts or softirqs so they are fine. But I will go through it
> > in more detail later today (sorry for slow responses, currently catching a plane).
>
> The theory is that the case where it is invoked from process context,
> it is invoked from an rcuc kthread, which is bound to a single CPU.
> Wouldn't hurt to check, though!
>
> > CONFIG_DEBUG_PREEMPT should be able to catch these kinds of issues since
> > smp_processor_id() checks this internally. And it seems rcutorture configs do
> > enable these, so it may not be an issue after all, or that DEBUG_PREEMPT
> > checking needs some investigation to see why it doesn't warn if at all :-)
>
> Or maybe I don't have CONFIG_DEBUG_PREEMPT enabled on the scenario that
> needs it. ;-)
>
> And please see below for an additional patch to make the world safe for
> rcu_is_cpu_rrupt_from_idle(). ;-)
>
> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> commit a8d8c1e6e09a9a9521e3248a92f5fbb9eb2cf988
> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
> Date: Wed Mar 27 10:03:12 2019 -0700
>
> rcu: Avoid self-IPI in sync_sched_exp_online_cleanup()
>
> The sync_sched_exp_online_cleanup() is invoked at online time to handle
> the case where the start of an expedited grace period ran concurrently
> with a CPU being taken offline and then immediately being placed online.
> It checks to see if RCU needs an expedited quiescent state from the
> incoming CPU, sending it an IPI if so. However, it is quite possible
> that sync_sched_exp_online_cleanup() is running on that CPU, in which
> case it is considerably less overhead to simply request the quiescent
> state locally instead of simulating a self-IPI.
>
> This commit therefore places the last few lines of rcu_exp_handler()
> into a new rcu_exp_need_qs() function, which is invoked both by
> rcu_exp_handler() and by sync_sched_exp_online_cleanup() in the self-IPI
> case.
>
> This also reduces the rcu_exp_handler() function's state space by
> removing the direct call that this smp_call_function_single() uses to
> emulate the requested self-IPI. This in turn will allow tighter error
> checking in rcu_is_cpu_rrupt_from_idle().
>
> Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
>
> diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
> index 5390618787b6..de1b4acf6979 100644
> --- a/kernel/rcu/tree_exp.h
> +++ b/kernel/rcu/tree_exp.h
> @@ -699,6 +699,16 @@ static int rcu_print_task_exp_stall(struct rcu_node *rnp)
>
> #else /* #ifdef CONFIG_PREEMPT_RCU */
>
> +/* Request an expedited quiescent state. */
> +static void rcu_exp_need_qs(void)
> +{
> + __this_cpu_write(rcu_data.cpu_no_qs.b.exp, true);
> + /* Store .exp before .rcu_urgent_qs. */
> + smp_store_release(this_cpu_ptr(&rcu_data.rcu_urgent_qs), true);
> + set_tsk_need_resched(current);
> + set_preempt_need_resched();
> +}
> +
> /* Invoked on each online non-idle CPU for expedited quiescent state. */
> static void rcu_exp_handler(void *unused)
> {
> @@ -714,25 +724,38 @@ static void rcu_exp_handler(void *unused)
> rcu_report_exp_rdp(this_cpu_ptr(&rcu_data));
> return;
> }
> - __this_cpu_write(rcu_data.cpu_no_qs.b.exp, true);
> - /* Store .exp before .rcu_urgent_qs. */
> - smp_store_release(this_cpu_ptr(&rcu_data.rcu_urgent_qs), true);
> - set_tsk_need_resched(current);
> - set_preempt_need_resched();
> + rcu_exp_need_qs();
> }
>
> /* Send IPI for expedited cleanup if needed at end of CPU-hotplug operation. */
> static void sync_sched_exp_online_cleanup(int cpu)
> {
> + unsigned long flags;
> + int my_cpu;
> struct rcu_data *rdp;
> int ret;
> struct rcu_node *rnp;
>
> rdp = per_cpu_ptr(&rcu_data, cpu);
> rnp = rdp->mynode;
> - if (!(READ_ONCE(rnp->expmask) & rdp->grpmask))
> + my_cpu = get_cpu();
> + /* Quiescent state either not needed or already requested, leave. */
> + if (!(READ_ONCE(rnp->expmask) & rdp->grpmask) ||
> + __this_cpu_read(rcu_data.cpu_no_qs.b.exp)) {
> + put_cpu();
> return;
> + }
> + /* Quiescent state needed on current CPU, so set it up locally. */
> + if (my_cpu == cpu) {
> + local_irq_save(flags);
> + rcu_exp_need_qs();
> + local_irq_restore(flags);
> + put_cpu();
> + return;

This looks good to me, thanks. I love it that we can avoid the self-ipi and
reduce the overhead, and nice to see the lockdep check we added triggered
this optimization.

I still need to go through and understand the "PREEMPT=n hotplug clean up"
work. :-)

Also, you could add to the patch:
Reviewed-by: Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>

(and I'm going to go through the other places where get_cpu should be used)

thanks,

- Joel


> + }
> + /* Quiescent state needed on some other CPU, send IPI. */
> ret = smp_call_function_single(cpu, rcu_exp_handler, NULL, 0);
> + put_cpu();
> WARN_ON_ONCE(ret);
> }
>
>