Re: [PATCH] clk: asr: clock driver support for ASR AquilaC Soc

From: Zhou Qiao(周侨)
Date: Wed Mar 27 2019 - 04:48:12 EST


On 2019/3/26 下午7:54, Dan Carpenter wrote:
> On Sat, Mar 23, 2019 at 10:08:35PM +0800, qiaozhou wrote:
>> From: Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
>>
>> add clock driver support for ASR AquilaC SoC.
>>
>> We add clk-gate, clk-mix, and clk-pll drivers:
>> 1. clk-gate driver is for regisers which have different enable/disable bits
>> to control gating.
>> 2. clk-mix driver is for registers which request to set div and mux
>> bits at the same time.
>> 3. clk-pll driver is for pll configuration.
>>
>> Signed-off-by: qiaozhou <qiaozhou@xxxxxxxxxxxx>
>> ---
>> drivers/clk/Kconfig | 1 +
>> drivers/clk/Makefile | 1 +
>> drivers/clk/asr/Kconfig | 17 ++
>> drivers/clk/asr/Makefile | 6 +
>> drivers/clk/asr/clk-aquilac.c | 595 ++++++++++++++++++++++++++++++++++++++
>> drivers/clk/asr/clk-gate.c | 151 ++++++++++
>> drivers/clk/asr/clk-mix.c | 393 ++++++++++++++++++++++++++
>> drivers/clk/asr/clk-pll.c | 642 ++++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/asr/clk-pll.h | 91 ++++++
>> drivers/clk/asr/clk.c | 222 +++++++++++++++
>> drivers/clk/asr/clk.h | 235 ++++++++++++++++
>> 11 files changed, 2354 insertions(+)
>> create mode 100644 drivers/clk/asr/Kconfig
>> create mode 100644 drivers/clk/asr/Makefile
>> create mode 100644 drivers/clk/asr/clk-aquilac.c
>> create mode 100644 drivers/clk/asr/clk-gate.c
>> create mode 100644 drivers/clk/asr/clk-mix.c
>> create mode 100644 drivers/clk/asr/clk-pll.c
>> create mode 100644 drivers/clk/asr/clk-pll.h
>> create mode 100644 drivers/clk/asr/clk.c
>> create mode 100644 drivers/clk/asr/clk.h
>>
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index e705aab..0ea9f74 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -315,5 +315,6 @@ source "drivers/clk/tegra/Kconfig"
>> source "drivers/clk/ti/Kconfig"
>> source "drivers/clk/uniphier/Kconfig"
>> source "drivers/clk/zynqmp/Kconfig"
>> +source "drivers/clk/asr/Kconfig"
>>
>> endmenu
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index 1db1336..a88b3b9 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -112,3 +112,4 @@ endif
>> obj-$(CONFIG_ARCH_ZX) += zte/
>> obj-$(CONFIG_ARCH_ZYNQ) += zynq/
>> obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/
>> +obj-$(CONFIG_COMMON_CLK_ASR) += asr/
>> diff --git a/drivers/clk/asr/Kconfig b/drivers/clk/asr/Kconfig
>> new file mode 100644
>> index 0000000..ded68b5
>> --- /dev/null
>> +++ b/drivers/clk/asr/Kconfig
>> @@ -0,0 +1,17 @@
>> +config COMMON_CLK_ASR
>> + bool "Support for ASR's clock controllers"
>> + depends on OF
>> + depends on ARCH_ASR || COMPILE_TEST
>> + help
>> + Build the clock drivers for ASR8751C SoC. It contains clock-gate,
>> + clock-mix, clock-pll drivers which manages general gating, divider,
>> + mux, and pll enabling/disabling controls.
>> + Say Y if you want to support clock controls on ASR8751C SoCs
>> +
>> +config ASR_AQUILAC_CLK
>> + bool "ASR AquilaC clock controller support"
>> + depends on OF
>> + depends on ARCH_ASR
>> + depends on COMMON_CLK_ASR
>> + help
>> + Build the clock driver for ASR8751C AquilaC development board.
>> diff --git a/drivers/clk/asr/Makefile b/drivers/clk/asr/Makefile
>> new file mode 100644
>> index 0000000..f6b9bd3
>> --- /dev/null
>> +++ b/drivers/clk/asr/Makefile
>> @@ -0,0 +1,6 @@
>> +#
>> +# Makefile for asr specific clk
>> +#
>> +
>> +obj-$(CONFIG_COMMON_CLK_ASR) += clk-pll.o clk-gate.o clk-mix.o clk.o
>> +obj-$(CONFIG_ASR_AQUILAC_CLK) += clk-aquilac.o
>> diff --git a/drivers/clk/asr/clk-aquilac.c b/drivers/clk/asr/clk-aquilac.c
>> new file mode 100644
>> index 0000000..7274b60
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk-aquilac.c
>> @@ -0,0 +1,595 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * clock driver file for asr AquilaC
>> + *
>> + * Copyright (C) 2019 ASR Microelectronics(Shanghai) Co., Ltd.
>> + * Gang Wu <gangwu@xxxxxxxxxxxx>
>> + * Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
> ^^^^^
> Remove extra spaces.

I'll fix it.


>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/devfreq.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <dt-bindings/clock/asr8751c-clk.h>
>> +#include "clk.h"
>> +#include "clk-pll.h"
>> +
>> +/* APBC register offset for asr AquilaC */
>> +#define APBC_UART0 0x0
>> +#define APBC_UART1 0x4
>> +#define APBC_GPIO 0x8
>> +#define APBC_SSP0 0x1c
>> +#define APBC_IPC 0x24
>> +#define APBC_RTC 0x28
>> +#define APBC_TWSI0 0x2c
>> +#define APBC_KPC 0x30
>> +#define APBC_TIMERS 0x34
>> +#define APBC_AIB 0x3c
>> +#define APBC_SSP2 0x4c
>> +#define APBC_TWSI1 0x60
>> +#define APBC_THERMAL 0x6c
>> +#define APBC_UART2 0x78
>> +#define APBC_TWSI4 0x7c
>> +#define APBC_TWSI5 0x80
>> +#define APBC_TWSI6 0x84
>> +#define APBC_TWSI7 0x88
>> +#define APBC_TWSI8 0x8c
>> +
>> +#define MPMU_UART_PLL 0x14
>> +#define MPMU_WDTPCR 0x200
>> +
>> +#define APMU_SDH0 0x54
>> +#define APMU_SDH1 0x58
>> +#define APMU_SDH2 0xe0
>> +#define APMU_USB 0x5c
>> +#define APMU_DMA 0x64
>> +#define APMU_AES 0x68
>> +#define APMU_TRACE_CONFIG 0x108
>> +
>> +#define APB_SPARE_PLL1CR 0x100
>> +#define APB_SPARE_PLL2CR 0x104
>> +#define APB_SPARE_PLL3CR 0x108
>> +#define APB_SPARE_PLL4CR 0x124
>> +#define APB_SPARE_PLL5CR 0x114
>> +#define APB_SPARE_PLL6CR 0x13c
>> +#define APB_SPARE_PLL6CR2 0x140
>> +#define APB_SPARE_PLL7CR 0x148
>> +#define APB_SPARE_PLL7CR2 0x14c
>> +
>> +#define MPMU_PLL2CR 0x34
>> +#define MPMU_PLL3CR 0x1c
>> +#define MPMU_PLL4CR 0x50
>> +#define MPMU_PLL4CR 0x50
>> +#define MPMU_PLL5CR 0x4c
>> +#define MPMU_POSR 0x10
>> +#define POSR_PLL1_LOCK (1 << 27)
>> +#define POSR_PLL2_LOCK (1 << 28)
>> +#define POSR_PLL3_LOCK (1 << 29)
>> +#define POSR_PLL4_LOCK (1 << 30)
>> +#define POSR_PLL5_LOCK (1 << 31)
>> +#define POSR_PLL6_LOCK (1 << 31)
>> +#define POSR_PLL7_LOCK (1 << 31)
>> +
>> +#define MPMU_ACGR 0x1024
>> +
>> +enum pll {
>> + PLL2 = 0,
>> + PLL3,
>> + PLL4,
>> + PLL5,
>> + PLL6,
>> + PLL7,
>> + MAX_PLL_NUM,
>> +};
>> +
>> +struct plat_pll_info {
>> + spinlock_t lock;
>> + const char *vco_name;
>> + /* clk flags */
>> + unsigned long vco_flag;
>> + unsigned long vcoclk_flag;
>> + /* dt index */
>> + unsigned int vcodtidx;
> You could just name it "dt_idx" and remove the comment?

OK.


>
>> +};
>> +
>> +static struct asr_vco_params pllx_vco_params[MAX_PLL_NUM] __initdata = {
>> + {
>> + .vco_min = 600000000UL,
>> + .vco_max = 2700000000UL,
>> + .cr_off = MPMU_PLL2CR,
>> + .swcr_off = APB_SPARE_PLL2CR,
>> + .lock_off = MPMU_POSR,
>> + .lock_enable_bit = POSR_PLL2_LOCK,
>> + },
>> + {
>> + .vco_min = 600000000UL,
>> + .vco_max = 2700000000UL,
>> + .cr_off = MPMU_PLL3CR,
>> + .swcr_off = APB_SPARE_PLL3CR,
>> + .lock_off = MPMU_POSR,
>> + .lock_enable_bit = POSR_PLL3_LOCK,
>> + },
>> + {
>> + .vco_min = 600000000UL,
>> + .vco_max = 2700000000UL,
>> + .cr_off = MPMU_PLL4CR,
>> + .swcr_off = APB_SPARE_PLL4CR,
>> + .lock_off = MPMU_POSR,
>> + .lock_enable_bit = POSR_PLL4_LOCK,
>> + },
>> + {
>> + .vco_min = 600000000UL,
>> + .vco_max = 2700000000UL,
>> + .cr_off = MPMU_PLL5CR,
>> + .swcr_off = APB_SPARE_PLL5CR,
>> + .lock_off = MPMU_POSR,
>> + .lock_enable_bit = POSR_PLL5_LOCK,
>> + },
>> + {
>> + .vco_min = 600000000UL,
>> + .vco_max = 2700000000UL,
>> + .swcr_off = APB_SPARE_PLL6CR,
>> + .swcr_off = APB_SPARE_PLL6CR2,
>> + .lock_off = APB_SPARE_PLL6CR2,
>> + .lock_enable_bit = POSR_PLL6_LOCK,
>> + },
>> + {
>> + .vco_min = 600000000UL,
>> + .vco_max = 2700000000UL,
>> + .swcr_off = APB_SPARE_PLL7CR,
>> + .swcr2_off = APB_SPARE_PLL7CR2,
>> + .lock_off = APB_SPARE_PLL7CR2,
>> + .lock_enable_bit = POSR_PLL7_LOCK,
>> + },
>> +};
>> +
>> +static struct plat_pll_info pllx_platinfo[MAX_PLL_NUM] __initdata = {
>> + {
>> + .vco_name = "pll2_vco",
>> + .vcoclk_flag = 0,
>> + .vco_flag = ASR_PLL_FRAC_FEAT | ASR_PLL_SKIP_DEF_RATE,
>> + .vcodtidx = ASR_CLK_PLL2_VCO,
>> + },
>> + {
>> + .vco_name = "pll3_vco",
>> + .vcoclk_flag = 0,
>> + .vco_flag = ASR_PLL_FRAC_FEAT | ASR_PLL_SKIP_DEF_RATE,
>> + .vcodtidx = ASR_CLK_PLL3_VCO,
>> + },
>> +
>> + {
>> + .vco_name = "pll4_vco",
>> + .vcoclk_flag = 0,
>> + .vco_flag = ASR_PLL_FRAC_FEAT | ASR_PLL_SKIP_DEF_RATE,
>> + .vcodtidx = ASR_CLK_PLL4_VCO,
>> + },
>> + {
>> + .vco_name = "pll5_vco",
>> + .vcoclk_flag = 0,
>> + .vco_flag = ASR_PLL_FRAC_FEAT | ASR_PLL_SKIP_DEF_RATE,
>> + .vcodtidx = ASR_CLK_PLL5_VCO,
>> + },
>> + {
>> + .vco_name = "pll6_vco",
>> + .vcoclk_flag = 0,
>> + .vco_flag = ASR_PLL_FRAC_FEAT | ASR_PLL_REG_NEW | ASR_PLL_SKIP_DEF_RATE,
>> + .vcodtidx = ASR_CLK_PLL6_VCO,
>> + },
>> + {
>> + .vco_name = "pll7_vco",
>> + .vcoclk_flag = 0,
>> + .vco_flag = ASR_PLL_FRAC_FEAT | ASR_PLL_FRAC_AUDIO | ASR_PLL_REG_NEW | ASR_PLL_SKIP_DEF_RATE,
>> + .vcodtidx = ASR_CLK_PLL7_VCO,
>> + },
>> +};
>> +
>> +static DEFINE_SPINLOCK(pll1_lock);
>> +static DEFINE_SPINLOCK(pll2_lock);
>> +static DEFINE_SPINLOCK(pll3_lock);
>> +static DEFINE_SPINLOCK(pll4_lock);
>> +static DEFINE_SPINLOCK(pll5_lock);
>> +static DEFINE_SPINLOCK(pll6_lock);
>> +static DEFINE_SPINLOCK(pll7_lock);
>> +static DEFINE_SPINLOCK(pll1_lock_2);
>> +static DEFINE_SPINLOCK(uart0_lock);
>> +static DEFINE_SPINLOCK(uart1_lock);
>> +static DEFINE_SPINLOCK(uart2_lock);
>> +static DEFINE_SPINLOCK(timer0_lock);
>> +static DEFINE_SPINLOCK(sdh0_lock);
>> +static DEFINE_SPINLOCK(sdh1_lock);
>> +static DEFINE_SPINLOCK(sdh2_lock);
>> +
>> +static const char * const uart_parent[] = {"pll1_58p5", "uart_pll"};
>> +static const char * const aes_parent[] = {"pll1_208", "pll1_104"};
>> +static const char * const ssp_parent[] = {
>> + "pll1_6p5", "pll1_13", "pll1_26", "pll1_52"};
>> +static const char * const timer_parent[] = {
>> + "pll1_13", "clk32", "pll1_6p5", "vctcxo_3p25", "vctcxo_1"};
>> +static const char * const sdh_parent_names[] = {
>> + "pll1_416", "pll1_624", "pll6_d2", "pll6_d4"};
>> +static const char * const keep_on_clocks_tbl[] = {
>> + "dma_clk", "gpio_clk", "pll1_624", "pll1_26"};
>> +static unsigned long pll_rates[MAX_PLL_NUM] = {
>> + 2100 * MHZ, 1900 * MHZ, 1400 * MHZ, 1540 * MHZ,
>> + 1600 * MHZ, 1536 * MHZ};
>> +
>> +static struct asr_clk_mix_clk_table sdh_pptbl[] = {
>> + {.rate = 200000000, .parent_index = 3, },
>> + {.rate = 208000000, .parent_index = 0, },
>> + {.rate = 312000000, .parent_index = 1, },
>> + {.rate = 400000000, .parent_index = 3, },
>> + {.rate = 800000000, .parent_index = 2, },
>> +};
>> +static struct asr_clk_mix_config sdh_mix_config = {
>> + .reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, (0x1 << 11)),
>> + .table = sdh_pptbl,
>> + .table_size = ARRAY_SIZE(sdh_pptbl),
>> +};
>> +
>> +static struct asr_param_mux_clk apbc_mux_clks[] __initdata = {
>> + {ASR_CLK_MUX_TIMER0, "timer0_mux", timer_parent, ARRAY_SIZE(timer_parent), CLK_SET_RATE_PARENT, APBC_TIMERS, 4, 3, 0, &timer0_lock},
>> + {ASR_CLK_MUX_UART0, "uart0_mux", uart_parent, ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
>> + {ASR_CLK_MUX_UART1, "uart1_mux", uart_parent, ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
>> + {ASR_CLK_MUX_UART2, "uart2_mux", uart_parent, ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
>> + {ASR_CLK_MUX_SSP0, "ssp0_mux", ssp_parent, ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, APBC_SSP0, 7, 3, 0, NULL},
>> + {ASR_CLK_MUX_SSP2, "ssp2_mux", ssp_parent, ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, APBC_SSP2, 7, 3, 0, NULL},
>> +};
>> +
>> +static struct asr_param_mux_clk apmu_mux_clks[] __initdata = {
>> + {ASR_CLK_MUX_AES, "aes_mux", aes_parent, ARRAY_SIZE(aes_parent), CLK_SET_RATE_PARENT, APMU_AES, 6, 1, 0, NULL},
>> +};
>> +
>> +static struct asr_param_fixed_rate_clk fixed_rate_clks[] = {
>> + {ASR_CLK_CLK32, "clk32", NULL, 0, 32768},
>> + {ASR_CLK_VCTCXO, "vctcxo", NULL, 0, 26000000},
>> + {ASR_CLK_VCTCXO_3P25M, "vctcxo_3p25", NULL, 0, 3250000},
>> + {ASR_CLK_VCTCXO_1M, "vctcxo_1", NULL, 0, 1000000},
>> + {ASR_CLK_PLL1_VCO, "pll1_2496_vco", NULL, 0, 2496000000},
>> +};
>> +
>> +/* general gate clk controlled by APB_SPARE based registers */
>> +static struct asr_param_general_gate_clk general_gate_clks[] __initdata = {
>> + {ASR_CLK_PLL1_D1_2496, "pll1_d1_2496", "pll1_d1_2496_vco", APB_SPARE_PLL1CR, 26, 0, &pll1_lock, 0},
>> + {ASR_CLK_PLL1_D2_1248, "pll1_d2_1248", "pll1_d2_1248_vco", APB_SPARE_PLL1CR, 27, 0, &pll1_lock, 0},
>> + {ASR_CLK_PLL1_D3_832, "pll1_d3_832", "pll1_d3_832_vco", APB_SPARE_PLL1CR, 28, 0, &pll1_lock, 0},
>> + {ASR_CLK_PLL1_D4_624, "pll1_d4_624", "pll1_d4_624_vco", APB_SPARE_PLL1CR, 29, 0, &pll1_lock, 0},
>> + {ASR_CLK_PLL1_D5_499, "pll1_d5_499", "pll1_d5_499_vco", APB_SPARE_PLL1CR, 30, 0, &pll1_lock, 0},
>> +
>> + {ASR_CLK_PLL2_D1, "pll2_d1", "pll2_d1_vco", APB_SPARE_PLL2CR, 26, 0, &pll2_lock},
>> + {ASR_CLK_PLL2_D2, "pll2_d2", "pll2_d2_vco", APB_SPARE_PLL2CR, 27, 0, &pll2_lock},
>> + {ASR_CLK_PLL2_D3, "pll2_d3", "pll2_d3_vco", APB_SPARE_PLL2CR, 28, 0, &pll2_lock},
>> + {ASR_CLK_PLL2_D4, "pll2_d4", "pll2_d4_vco", APB_SPARE_PLL2CR, 29, 0, &pll2_lock},
>> + {ASR_CLK_PLL2_D5, "pll2_d5", "pll2_d5_vco", APB_SPARE_PLL2CR, 30, 0, &pll2_lock},
>> +
>> + {ASR_CLK_PLL3_D1, "pll3_d1", "pll3_d1_vco", APB_SPARE_PLL3CR, 26, 0, &pll3_lock, CLK_SET_RATE_PARENT},
>> + {ASR_CLK_PLL3_D2, "pll3_d2", "pll3_d2_vco", APB_SPARE_PLL3CR, 27, 0, &pll3_lock, 0},
>> + {ASR_CLK_PLL3_D3, "pll3_d3", "pll3_d3_vco", APB_SPARE_PLL3CR, 28, 0, &pll3_lock, 0},
>> + {ASR_CLK_PLL3_D4, "pll3_d4", "pll3_d4_vco", APB_SPARE_PLL3CR, 29, 0, &pll3_lock, 0},
>> + {ASR_CLK_PLL3_D5, "pll3_d5", "pll3_d5_vco", APB_SPARE_PLL3CR, 30, 0, &pll3_lock, 0},
>> + {ASR_CLK_PLL4_D1, "pll4_d1", "pll4_d1_vco", APB_SPARE_PLL4CR, 26, 0, &pll4_lock, CLK_SET_RATE_PARENT},
>> + {ASR_CLK_PLL4_D2, "pll4_d2", "pll4_d2_vco", APB_SPARE_PLL4CR, 27, 0, &pll4_lock, 0},
>> + {ASR_CLK_PLL4_D3, "pll4_d3", "pll4_d3_vco", APB_SPARE_PLL4CR, 28, 0, &pll4_lock, 0},
>> + {ASR_CLK_PLL4_D4, "pll4_d4", "pll4_d4_vco", APB_SPARE_PLL4CR, 29, 0, &pll4_lock, 0},
>> + {ASR_CLK_PLL4_D5, "pll4_d5", "pll4_d5_vco", APB_SPARE_PLL4CR, 30, 0, &pll4_lock, 0},
>> +
>> + {ASR_CLK_PLL5_D1, "pll5_d1", "pll5_d1_vco", APB_SPARE_PLL5CR, 26, 0, &pll5_lock, CLK_SET_RATE_PARENT},
>> + {ASR_CLK_PLL5_D2, "pll5_d2", "pll5_d2_vco", APB_SPARE_PLL5CR, 27, 0, &pll5_lock},
>> + {ASR_CLK_PLL5_D3, "pll5_d3", "pll5_d3_vco", APB_SPARE_PLL5CR, 28, 0, &pll5_lock},
>> + {ASR_CLK_PLL5_D4, "pll5_d4", "pll5_d4_vco", APB_SPARE_PLL5CR, 29, 0, &pll5_lock},
>> + {ASR_CLK_PLL5_D5, "pll5_d5", "pll5_d5_vco", APB_SPARE_PLL5CR, 30, 0, &pll5_lock},
>> +
>> + {ASR_CLK_PLL6_D1, "pll6_d1", "pll6_d1_vco", APB_SPARE_PLL6CR, 26, 0, &pll6_lock},
>> + {ASR_CLK_PLL6_D2, "pll6_d2", "pll6_d2_vco", APB_SPARE_PLL6CR, 27, 0, &pll6_lock},
>> + {ASR_CLK_PLL6_D3, "pll6_d3", "pll6_d3_vco", APB_SPARE_PLL6CR, 28, 0, &pll6_lock},
>> + {ASR_CLK_PLL6_D4, "pll6_d4", "pll6_d4_vco", APB_SPARE_PLL6CR, 29, 0, &pll6_lock},
>> + {ASR_CLK_PLL6_D5, "pll6_d5", "pll6_d5_vco", APB_SPARE_PLL6CR, 30, 0, &pll6_lock},
>> +
>> + {ASR_CLK_PLL7_D1, "pll7_d1", "pll7_d1_vco", APB_SPARE_PLL7CR, 26, 0, &pll7_lock},
>> + {ASR_CLK_PLL7_D2, "pll7_d2", "pll7_d2_vco", APB_SPARE_PLL7CR, 27, 0, &pll7_lock},
>> + {ASR_CLK_PLL7_D3, "pll7_d3", "pll7_d3_vco", APB_SPARE_PLL7CR, 28, 0, &pll7_lock},
>> + {ASR_CLK_PLL7_D4, "pll7_d4", "pll7_d4_vco", APB_SPARE_PLL7CR, 29, 0, &pll7_lock},
>> + {ASR_CLK_PLL7_D5, "pll7_d5", "pll7_d5_vco", APB_SPARE_PLL7CR, 30, 0, &pll7_lock},
>> +};
>> +
>> +/* general gate clk controlld by MPMU_ACGR based registers */
>> +static struct asr_param_general_gate_clk general_gate_clks_2[] __initdata = {
>> + {ASR_CLK_PLL1_499, "pll1_499", "pll1_d5_499", MPMU_ACGR, 21, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_13_WDT, "pll1_13_wdt", "pll1_d192_13", MPMU_ACGR, 19, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_249, "pll1_249", "pll1_d10_249", MPMU_ACGR, 18, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_1248, "pll1_1248", "pll1_d2_1248", MPMU_ACGR, 16, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_624, "pll1_624", "pll1_d4_624", MPMU_ACGR, 15, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_832, "pll1_832", "pll1_d3_832", MPMU_ACGR, 14, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_312, "pll1_312", "pll1_d8_312", MPMU_ACGR, 13, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_104, "pll1_104", "pll1_d24_104", MPMU_ACGR, 12, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_52, "pll1_52", "pll1_d48_52", MPMU_ACGR, 11, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_48, "pll1_48", "pll1_d52_48", MPMU_ACGR, 10, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_58P5, "pll1_58p5", "pll1_m3d128_58p5", MPMU_ACGR, 8, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_52_2, "pll1_52_2", "pll1_d48_52", MPMU_ACGR, 7, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_32, "pll1_32", "pll1_d78_32", MPMU_ACGR, 6, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_208, "pll1_208", "pll1_d12_208", MPMU_ACGR, 5, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_26, "pll1_26", "pll1_d96_26", MPMU_ACGR, 4, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_13, "pll1_13", "pll1_d192_13", MPMU_ACGR, 3, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_6P5, "pll1_6p5", "pll1_d384_6p5", MPMU_ACGR, 2, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_78_UART, "pll1_uart", "pll1_d32_78", MPMU_ACGR, 1, 0, &pll1_lock_2, 0},
>> + {ASR_CLK_PLL1_416, "pll1_416", "pll1_d6_416", MPMU_ACGR, 0, 0, &pll1_lock_2, 0},
>> +};
>> +
>> +/* gate clk: enable/disable/reset bits are different, APB based. */
>> +static struct asr_param_gate_clk apbc_gate_clks[] __initdata = {
>> + {ASR_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_IPC, "ipc_clk", NULL, 0, APBC_IPC, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_TIMER0, "timer0_clk", "timer0_mux", CLK_SET_RATE_PARENT, APBC_TIMERS, 0x7, 0x3, 0x0, 0, &timer0_lock},
>> + {ASR_CLK_AIB, "aib_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_AIB, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 0x3, 0x0, 0, &uart0_lock},
>> + {ASR_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 0x3, 0x0, 0, &uart1_lock},
>> + {ASR_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
>> + {ASR_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 0x3, 0x0, ASR_CLK_GATE_NEED_DELAY, NULL},
>> + {ASR_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0x0, ASR_CLK_GATE_NEED_DELAY, NULL},
>> + {ASR_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_THERMAL, "thermal_clk", NULL, 0, APBC_THERMAL, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_TWSI4, "twsi4_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI4, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_TWSI5, "twsi5_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI5, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_TWSI6, "twsi6_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI6, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_TWSI7, "twsi7_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI7, 0x7, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_TWSI8, "twsi8_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI8, 0x7, 0x3, 0x0, 0, NULL},
>> +};
>> +
>> +/* gate clk: enable/disable/reset bits are different, APMU based. */
>> +static struct asr_param_gate_clk apmu_gate_clks[] __initdata = {
>> + {ASR_CLK_DMA, "dma_clk", NULL, 0, APMU_DMA, 0x9, 0x9, 0x0, 0, NULL},
>> + {ASR_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x3, 0x3, 0x0, 0, NULL},
>> + {ASR_CLK_SDH_AXI, "sdh_axi_clk", NULL, 0, APMU_SDH0, 0x9, 0x9, 0x0, 0, NULL},
>> + {ASR_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", 0, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
>> + {ASR_CLK_SDH1, "sdh1_clk", "sdh0_mix_clk", 0, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
>> + {ASR_CLK_SDH2, "sdh2_clk", "sdh0_mix_clk", 0, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock},
>> + {ASR_CLK_AES, "aes_clk", "aes_mux", 0, APMU_AES, 0x30, 0x30, 0x0, 0, NULL},
>> +};
>> +
>> +/* gate clk: enable/disable/reset bits are different, MPMU based. */
>> +static struct asr_param_gate_clk mpmu_gate_clks[] __initdata = {
>> + {ASR_CLK_WDT, "wdt_clk", "pll1_26", 0, MPMU_WDTPCR, 0x7, 0x3, 0x4, 0, NULL},
>> +};
>> +
>> +/* fixed factor clk */
>> +static struct asr_param_fixed_factor_clk fixed_factor_clks[] __initdata = {
>> + {ASR_CLK_PLL1_D1_2496_VCO, "pll1_d1_2496_vco", "pll1_2496_vco", 1, 1, 0},
>> + {ASR_CLK_PLL1_D2_1248_VCO, "pll1_d2_1248_vco", "pll1_2496_vco", 1, 2, 0},
>> + {ASR_CLK_PLL1_D3_832_VCO, "pll1_d3_832_vco", "pll1_2496_vco", 1, 3, 0},
>> + {ASR_CLK_PLL1_D4_624_VCO, "pll1_d4_624_vco", "pll1_2496_vco", 1, 4, 0},
>> + {ASR_CLK_PLL1_D5_499_VCO, "pll1_d5_499_vco", "pll1_2496_vco", 1, 5, 0},
>> + {ASR_CLK_PLL1_D6_416, "pll1_d6_416", "pll1_d3_832", 1, 2, 0},
>> + {ASR_CLK_PLL1_D8_312, "pll1_d8_312", "pll1_d4_624", 1, 2, 0},
>> + {ASR_CLK_PLL1_D10_249, "pll1_d10_249", "pll1_d5_499", 1, 2, 0},
>> + {ASR_CLK_PLL1_D12_208, "pll1_d12_208", "pll1_d3_832", 1, 4, 0},
>> + {ASR_CLK_PLL1_D24_104, "pll1_d24_104", "pll1_d4_624", 1, 6, 0},
>> + {ASR_CLK_PLL1_D32_78, "pll1_d32_78", "pll1_d4_624", 1, 8, 0},
>> + {ASR_CLK_PLL1_D32_78_2, "pll1_78", "pll1_312", 1, 4, 0},
>> + {ASR_CLK_PLL1_D48_52, "pll1_d48_52", "pll1_d4_624", 1, 12, 0},
>> + {ASR_CLK_PLL1_D52_48, "pll1_d52_48", "pll1_d4_624", 1, 13, 0},
>> + {ASR_CLK_PLL1_M3D128_58P5, "pll1_m3d128_58p5", "pll1_d4_624", 3, 32, 0},
>> + {ASR_CLK_PLL1_D78_32, "pll1_d78_32", "pll1_d4_624", 2, 39, 0},
>> + {ASR_CLK_PLL1_D96_26, "pll1_d96_26", "pll1_d4_624", 1, 24, 0},
>> + {ASR_CLK_PLL1_D192_13, "pll1_d192_13", "pll1_d4_624", 1, 48, 0},
>> + {ASR_CLK_PLL1_D384_6P5, "pll1_d384_6p5", "pll1_d4_624", 1, 96, 0},
>> +
>> + {ASR_CLK_PLL2_D1_VCO, "pll2_d1_vco", "pll2_vco", 1, 1, 0},
>> + {ASR_CLK_PLL2_D2_VCO, "pll2_d2_vco", "pll2_vco", 1, 2, 0},
>> + {ASR_CLK_PLL2_D3_VCO, "pll2_d3_vco", "pll2_vco", 1, 3, 0},
>> + {ASR_CLK_PLL2_D4_VCO, "pll2_d4_vco", "pll2_vco", 1, 4, 0},
>> + {ASR_CLK_PLL2_D5_VCO, "pll2_d5_vco", "pll2_vco", 1, 5, 0},
>> +
>> + {ASR_CLK_PLL3_D1_VCO, "pll3_d1_vco", "pll3_vco", 1, 1, CLK_SET_RATE_PARENT},
>> + {ASR_CLK_PLL3_D2_VCO, "pll3_d2_vco", "pll3_vco", 1, 2, 0},
>> + {ASR_CLK_PLL3_D3_VCO, "pll3_d3_vco", "pll3_vco", 1, 3, 0},
>> + {ASR_CLK_PLL3_D4_VCO, "pll3_d4_vco", "pll3_vco", 1, 4, 0},
>> + {ASR_CLK_PLL3_D5_VCO, "pll3_d5_vco", "pll3_vco", 1, 5, 0},
>> +
>> + {ASR_CLK_PLL4_D1_VCO, "pll4_d1_vco", "pll4_vco", 1, 1, CLK_SET_RATE_PARENT},
>> + {ASR_CLK_PLL4_D2_VCO, "pll4_d2_vco", "pll4_vco", 1, 2, 0},
>> + {ASR_CLK_PLL4_D3_VCO, "pll4_d3_vco", "pll4_vco", 1, 3, 0},
>> + {ASR_CLK_PLL4_D4_VCO, "pll4_d4_vco", "pll4_vco", 1, 4, 0},
>> + {ASR_CLK_PLL4_D5_VCO, "pll4_d5_vco", "pll4_vco", 1, 5, 0},
>> +
>> + {ASR_CLK_PLL5_D1_VCO, "pll5_d1_vco", "pll5_vco", 1, 1, CLK_SET_RATE_PARENT},
>> + {ASR_CLK_PLL5_D2_VCO, "pll5_d2_vco", "pll5_vco", 1, 2, 0},
>> + {ASR_CLK_PLL5_D3_VCO, "pll5_d3_vco", "pll5_vco", 1, 3, 0},
>> + {ASR_CLK_PLL5_D4_VCO, "pll5_d4_vco", "pll5_vco", 1, 4, 0},
>> + {ASR_CLK_PLL5_D5_VCO, "pll5_d5_vco", "pll5_vco", 1, 5, 0},
>> +
>> + {ASR_CLK_PLL6_D1_VCO, "pll6_d1_vco", "pll6_vco", 1, 1, 0},
>> + {ASR_CLK_PLL6_D2_VCO, "pll6_d2_vco", "pll6_vco", 1, 2, 0},
>> + {ASR_CLK_PLL6_D3_VCO, "pll6_d3_vco", "pll6_vco", 1, 3, 0},
>> + {ASR_CLK_PLL6_D4_VCO, "pll6_d4_vco", "pll6_vco", 1, 4, 0},
>> + {ASR_CLK_PLL6_D5_VCO, "pll6_d5_vco", "pll6_vco", 1, 5, 0},
>> +
>> + {ASR_CLK_PLL7_D1_VCO, "pll7_d1_vco", "pll7_vco", 1, 1, 0},
>> + {ASR_CLK_PLL7_D2_VCO, "pll7_d2_vco", "pll7_vco", 1, 2, 0},
>> + {ASR_CLK_PLL7_D3_VCO, "pll7_d3_vco", "pll7_vco", 1, 3, 0},
>> + {ASR_CLK_PLL7_D4_VCO, "pll7_d4_vco", "pll7_vco", 1, 4, 0},
>> + {ASR_CLK_PLL7_D5_VCO, "pll7_d5_vco", "pll7_vco", 1, 5, 0},
>> +};
>> +
>> +static void __init aquilac_general_clk_init(struct asr_clk_data *clock_data)
> ^^^^^^^^^^
> Rename this to "clk_data" or just "data".

OK. Thanks for the tips.


>
>
>> +{
>> + struct clk *clk;
>> + struct asr_clk_unit *unit = &clock_data->unit;
>> +
>> + asr_register_fixed_rate_clks(unit, fixed_rate_clks,
>> + ARRAY_SIZE(fixed_rate_clks));
> It's better to align things like this:
>
> asr_register_fixed_rate_clks(unit, fixed_rate_clks,
> ARRAY_SIZE(fixed_rate_clks));
>
> [tab][tab][tab][tab][space][space][space][space][space]ARRAY_SIZE(...

OK. Thanks for the tips.


>
>> +
>> + clk = clk_register_fractional_divider(NULL, "uart_pll", "pll1_uart",
>> + CLK_SET_RATE_PARENT,
>> + clock_data->mpmu_base + MPMU_UART_PLL,
>> + 0, 13, 16, 13, 0, NULL);
> clk = clk_register_fractional_divider(NULL, "uart_pll", "pll1_uart",
> CLK_SET_RATE_PARENT,
> clk_data->mpmu_base + MPMU_UART_PLL,
> 0, 13, 16, 13, 0, NULL);
>
>
> if (IS_ERR(clk)) ?

OK. I'll refine and add error-check.


>
>> + asr_clk_add(unit, ASR_CLK_PLL1_78_UART, clk);
>> +
>> + asr_register_general_gate_clks(unit, general_gate_clks,
>> + clock_data->apbs_base, ARRAY_SIZE(general_gate_clks));
>> +
>> + asr_register_general_gate_clks(unit, general_gate_clks_2,
>> + clock_data->mpmu_base, ARRAY_SIZE(general_gate_clks_2));
>> +
>> + asr_register_fixed_factor_clks(unit, fixed_factor_clks,
>> + ARRAY_SIZE(fixed_factor_clks));
>> +}
>> +
>> +static void __init aquilac_pll_init(struct asr_clk_data *clock_data)
>> +{
>> + struct clk *clk;
>> + struct asr_clk_unit *unit = &clock_data->unit;
>> + int idx;
> ^^^^^^^
> Just use "int i;" like this patch does in other functions.

OK.


>
> Introduce a couple temporary variables:
>
> struct asr_vco_params *param;
> struct plat_pll_info *info;
>
>> +
>> + for (idx = 0; idx < MAX_PLL_NUM; idx++) {
>> + spin_lock_init(&pllx_platinfo[idx].lock);
> param = &pllx_vco_params[i];
> info = &pllx_platinfo[i];

OK. Thanks for the suggestions.


>
>> +
>> + pllx_vco_params[idx].pll_swcr = clock_data->apbs_base + pllx_vco_params[idx].swcr_off;
> param->pll_swcr = data->apbs_base + param->swcr_off;

OK.


>
>> + /* pll6/7 have different base of some regs */
>> + if (idx < PLL6) {
>> + pllx_vco_params[idx].cr_reg = clock_data->mpmu_base + pllx_vco_params[idx].cr_off;
>> + pllx_vco_params[idx].lock_reg = clock_data->mpmu_base + pllx_vco_params[idx].lock_off;
>> + } else {
>> + pllx_vco_params[idx].pll_swcr2 = clock_data->apbs_base + pllx_vco_params[idx].swcr2_off;
>> + pllx_vco_params[idx].lock_reg = clock_data->apbs_base + pllx_vco_params[idx].lock_off;
>> + }
>> +
>> + pllx_vco_params[idx].default_rate = pll_rates[idx];
>> +
>> + clk = asr_clk_register_vco(pllx_platinfo[idx].vco_name,
>> + 0, pllx_platinfo[idx].vcoclk_flag, pllx_platinfo[idx].vco_flag,
>> + &pllx_platinfo[idx].lock, &pllx_vco_params[idx]);
> clk = asr_clk_register_vco(info->vco_name, 0, info->vcoclk_flag,
> info->vco_flag, &info->lock, param);
>
> Add some error handling.

OK.


>
>> + if (!__clk_is_enabled(clk))
>> + clk_set_rate(clk, pllx_vco_params[idx].default_rate);
>> + asr_clk_add(unit, pllx_platinfo[idx].vcodtidx, clk);
>> + }
>> +}
>> +static void __init aquilac_periph_clk_init(struct asr_clk_data *clock_data)
>> +{
>> + struct asr_clk_unit *unit = &clock_data->unit;
>> +
>> + asr_register_mux_clks(unit, apbc_mux_clks, clock_data->apbc_base,
>> + ARRAY_SIZE(apbc_mux_clks));
> sr_register_mux_clks(unit, apbc_mux_clks, data->apbc_base,
> ARRAY_SIZE(apbc_mux_clks))

OK.


>> +
>> + asr_register_mux_clks(unit, apmu_mux_clks, clock_data->apmu_base,
>> + ARRAY_SIZE(apmu_mux_clks));
>> +
>> + asr_register_gate_clks(unit, apbc_gate_clks, clock_data->apbc_base,
>> + ARRAY_SIZE(apbc_gate_clks));
>> +
>> + asr_register_gate_clks(unit, apmu_gate_clks, clock_data->apmu_base,
>> + ARRAY_SIZE(apmu_gate_clks));
>> +
>> + asr_register_gate_clks(unit, mpmu_gate_clks, clock_data->mpmu_base,
>> + ARRAY_SIZE(mpmu_gate_clks));
>> +}
>> +
>> +static void __init aquilac_mix_clk_init(struct asr_clk_data *clock_data)
>> +{
>> + sdh_mix_config.reg_info.reg_clk_ctrl = clock_data->apmu_base + APMU_SDH0;
>> + asr_clk_register_mix(NULL, "sdh0_mix_clk",
>> + (const char **)sdh_parent_names, ARRAY_SIZE(sdh_parent_names),
> Better to declare asr_clk_register_mix() as taking a
> "const char *const *parent_names," so that we can remove these casts.

OK. Thanks for the tips.


>
>
>> + CLK_SET_RATE_PARENT,
>> + &sdh_mix_config, &sdh0_lock);
>> +
>> + sdh_mix_config.reg_info.reg_clk_ctrl = clock_data->apmu_base + APMU_SDH1;
>> + asr_clk_register_mix(NULL, "sdh1_mix_clk",
>> + (const char **)sdh_parent_names, ARRAY_SIZE(sdh_parent_names),
>> + CLK_SET_RATE_PARENT,
>> + &sdh_mix_config, &sdh1_lock);
>> +
>> + sdh_mix_config.reg_info.reg_clk_ctrl = clock_data->apmu_base + APMU_SDH2;
>> + asr_clk_register_mix(NULL, "sdh2_mix_clk",
>> + (const char **)sdh_parent_names, ARRAY_SIZE(sdh_parent_names),
>> + CLK_SET_RATE_PARENT,
>> + &sdh_mix_config, &sdh2_lock);
>> +}
>> +
>> +static int __init aquilac_clk_of_iomap(struct device_node *np, struct asr_clk_data *acu)
> Why is it called "acu" here and "clock_data" everywhere else?

I should use the unified name. will fix it.


>
>> +{
>> + acu->mpmu_base = of_iomap(np, 0);
>> + if (!acu->mpmu_base) {
>> + pr_err("failed to map mpmu registers\n");
>> + goto out;
> There is nothing to free here so it's more readable to just say:
>
> return -ENOMEM;

OK. Thanks for the tips.


>
>> + }
>> +
>> + acu->apmu_base = of_iomap(np, 1);
>> + if (!acu->apmu_base) {
>> + pr_err("failed to map apmu registers\n");
>> + goto out;
> "out" is too vague for a label name. We care about function names and
> variable names so we should care about label names. We want to free
> "acu->mpmu_base" so the label should say "goto free_mpmu;"

OK. Thanks for the tips.


>
>> + }
>> +
>> + acu->apbc_base = of_iomap(np, 2);
>> + if (!acu->apbc_base) {
>> + pr_err("failed to map apbc registers\n");
>> + goto out;
>
> We want to free "apmu_base" so "goto free_apmu;" Just always free the
> most recent allocation.

OK. Thanks for the tips.


>
>
>> + }
>> +
>> + acu->apbs_base = of_iomap(np, 3);
>> + if (!acu->apbs_base) {
>> + pr_err("failed to map apbs registers\n");
>> + goto out;
>> + }
>> +
>> + acu->ciu_base = of_iomap(np, 4);
>> + if (!acu->ciu_base) {
>> + pr_err("failed to map ciu registers\n");
>> + goto out;
>> + }
>> +
>> + acu->dciu_base = of_iomap(np, 5);
>> + if (!acu->dciu_base) {
>> + pr_err("failed to map dragon ciu registers\n");
>> + goto out;
>> + }
>> +
>> + acu->ddrc_base = of_iomap(np, 6);
>> + if (!acu->ddrc_base) {
>> + pr_err("failed to map ddrc registers\n");
>> + goto out;
>> + }
>> +
>> + return 0;
>> +out:
>> + return -EINVAL;
> It should be -ENOMEM instead of -EINVAL.
>
> free_dciu:
> of_iounmap(acu->dciu_base);
> free_ciu:
> of_iounmap(acu->ciu_base);
> free_apbs:
> of_iounmap(acu->apbs_base);
> free_apbc:
> of_iounmap(acu->apbc_base);
> free_apmu:
> of_iounmap(acu->apmu_base);
> free_mpmu:
> of_iounmap(acu->mpmu_base);
>
> return -ENOMEM;

It makes sense and is better. Thanks a lot.


>
>
>> +}
> Then you can take the error handling, add of_iounmap(acu->ddrc_base) and
> you have a aquilac_clk_of_iounmap() function.
>
> static void aquilac_clk_of_iounmap(struct asr_clk_data *acu)
> {
> of_iounmap(acu->ddrc_base);
> of_iounmap(acu->dciu_base);
> of_iounmap(acu->ciu_base);
> of_iounmap(acu->apbs_base);
> of_iounmap(acu->apbc_base);
> of_iounmap(acu->apmu_base);
> of_iounmap(acu->mpmu_base);
> }

OK.


>
>> +
>> +static void __init aquilac_clk_init(struct device_node *np)
>> +{
>> + int ret;
>> + struct asr_clk_data *clock_data;
>> +
>> + clock_data = kzalloc(sizeof(*clock_data), GFP_KERNEL);
>> + if (!clock_data)
>> + return;
>> +
>> + ret = aquilac_clk_of_iomap(np, clock_data);
>> + if (ret < 0)
>> + goto out;
> goto free_data;
>
>> +
>> + ret = asr_clk_init(np, &clock_data->unit, ASR_NR_CLKS);
>> + if (ret < 0)
>> + goto out;
> goto unmap;
>
>> +
>> + aquilac_general_clk_init(clock_data);
>> +
>> + aquilac_pll_init(clock_data);
>> +
>> + aquilac_mix_clk_init(clock_data);
>> +
>> + aquilac_periph_clk_init(clock_data);
>> +
>> + asr_clks_enable((const char **)keep_on_clocks_tbl, ARRAY_SIZE(keep_on_clocks_tbl));
>> +
>> + return;
>> +out:
>> + kfree(clock_data);
> unmap:
> aquilac_clk_of_iounmap(clock_data);
> free_data:
> kfree(clock_data);

OK.


>
>> +}
>> +CLK_OF_DECLARE(aquilac_clk, "asr,8751c-clock", aquilac_clk_init);
>> diff --git a/drivers/clk/asr/clk-gate.c b/drivers/clk/asr/clk-gate.c
>> new file mode 100644
>> index 0000000..4ba5587
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk-gate.c
>> @@ -0,0 +1,151 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * asr gate clock operation source file
>> + *
>> + * Copyright (C) 2019 ASR Microelectronics(Shanghai) Co., Ltd.
>> + * Gang Wu <gangwu@xxxxxxxxxxxx>
>> + * Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/delay.h>
>> +#include <linux/platform_device.h>
>> +#include "clk.h"
>> +
>> +#define to_clk_asr_gate(hw) container_of(hw, struct asr_clk_gate, hw)
>> +
>> +#define TIMEOUT_LIMIT 20000
>> +#define DELAY_CYCLE 2000000
>> +
>> +static int asr_clk_gate_enable(struct clk_hw *hw)
>> +{
>> + struct asr_clk_gate *gate = to_clk_asr_gate(hw);
>> + unsigned long flags = 0;
>> + unsigned long rate;
>> + u32 tmp;
>> + u32 val = 0;
> ^^^^
> No need to initialize.

OK.

>
>> + int timeout_power = 1;
>> +
>> + if (gate->lock)
>> + spin_lock_irqsave(gate->lock, flags);
>> +
>> + tmp = clk_readl(gate->reg);
>> + tmp &= ~gate->mask;
>> + tmp |= gate->val_enable;
>> + clk_writel(tmp, gate->reg);
>> +
>> + val = clk_readl(gate->reg);
>> + while ((val & gate->mask) != gate->val_enable && (timeout_power < TIMEOUT_LIMIT)) {
>> + udelay(timeout_power);
>> + val = clk_readl(gate->reg);
>> + timeout_power *= 10;
>> + }
>> +
>> + if (timeout_power > 1) {
> ^^^^^^^^^^^^^^^^^
> Shouldn't this test be?:
>
> if (timeout_power >= TIMEOUT_LIMIT) {

Ideally the register write succeeds without entering while loop, so it
tests against 1. It still pass if it retries within timeout limit.
otherwise it fails. It's confusing here and I'll refine the test.


>
>> + if (val == tmp)
>> + pr_err("write clk_gate %s timeout occur, read pass after %d us delay\n", clk_hw_get_name(hw), timeout_power);
>> + else
>> + panic("write clk_gate %s timeout after %d us!\n", clk_hw_get_name(hw), timeout_power);
> Please don't call panic() from drivers. It means can't debug the
> system after it fails.

OK. will remove panic.


>
>> + }
>> +
>> + if (gate->lock)
>> + spin_unlock_irqrestore(gate->lock, flags);
>> +
>> + if (gate->flags & ASR_CLK_GATE_NEED_DELAY) {
>> + rate = clk_hw_get_rate(hw);
>> + udelay(DIV_ROUND_UP(DELAY_CYCLE, rate));
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void asr_clk_gate_disable(struct clk_hw *hw)
>> +{
>> + struct asr_clk_gate *gate = to_clk_asr_gate(hw);
>> + unsigned long flags = 0;
>> + unsigned long rate;
>> + u32 tmp;
>> +
>> + if (gate->lock)
>> + spin_lock_irqsave(gate->lock, flags);
>> +
>> + tmp = clk_readl(gate->reg);
>> + tmp &= ~gate->mask;
>> + tmp |= gate->val_disable;
>> + clk_writel(tmp, gate->reg);
>> +
>> + if (gate->flags & ASR_CLK_GATE_NEED_DELAY) {
>> + rate = clk_hw_get_rate(hw);
>> + udelay(DIV_ROUND_UP(DELAY_CYCLE, rate));
>> + }
>> +
>> + if (gate->lock)
>> + spin_unlock_irqrestore(gate->lock, flags);
>> +}
>> +
>> +static int asr_clk_gate_is_enabled(struct clk_hw *hw)
>> +{
>> + struct asr_clk_gate *gate = to_clk_asr_gate(hw);
>> + unsigned long flags = 0;
>> + u32 tmp;
>> +
>> + if (gate->lock)
>> + spin_lock_irqsave(gate->lock, flags);
>> +
>> + tmp = clk_readl(gate->reg);
>> +
>> + if (gate->lock)
>> + spin_unlock_irqrestore(gate->lock, flags);
>> +
>> + return (tmp & gate->mask) == gate->val_enable;
>> +}
>> +
>> +const struct clk_ops asr_clk_gate_ops = {
>> + .enable = asr_clk_gate_enable,
>> + .disable = asr_clk_gate_disable,
>> + .is_enabled = asr_clk_gate_is_enabled,
>> +};
>> +
>> +struct clk *asr_clk_register_gate(struct device *dev, const char *name,
>> + const char *parent_name, unsigned long flags,
>> + void __iomem *reg, u32 mask, u32 val_enable, u32 val_disable,
>> + unsigned long gate_flags, spinlock_t *lock)
>> +{
>> + struct asr_clk_gate *gate;
>> + struct clk *clk;
>> + struct clk_init_data init;
>> +
>> + /* allocate the gate */
>> + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
>> + if (!gate)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.ops = &asr_clk_gate_ops;
>> + init.flags = flags | CLK_IS_BASIC;
>> + init.parent_names = (parent_name ? &parent_name : NULL);
>> + init.num_parents = (parent_name ? 1 : 0);
>> +
>> + /* struct clk_gate assignments */
>> + gate->reg = reg;
>> + gate->mask = mask;
>> + gate->val_enable = val_enable;
>> + gate->val_disable = val_disable;
>> + gate->flags = gate_flags;
>> + gate->lock = lock;
>> + gate->hw.init = &init;
>> +
>> + clk = clk_register(dev, &gate->hw);
>> +
>> + if (IS_ERR(clk))
>> + kfree(gate);
>> +
>> + return clk;
>> +}
>> diff --git a/drivers/clk/asr/clk-mix.c b/drivers/clk/asr/clk-mix.c
>> new file mode 100644
>> index 0000000..d099a41
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk-mix.c
>> @@ -0,0 +1,393 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * asr mix(div and mux) driver for asr-8751c
>> + *
>> + * Copyright (C) 2019 ASR Microelectronics(Shanghai) Co., Ltd.
>> + * Gang Wu <gangwu@xxxxxxxxxxxx>
>> + * Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/platform_device.h>
>> +#include "clk.h"
>> +
>> +/*
>> + * mux and div field can't be configured separately in two clocks.
>> + */
>> +
>> +#define to_clk_mix(hw) container_of(hw, struct asr_clk_mix, hw)
>> +
>> +static unsigned int _get_maxdiv(struct asr_clk_mix *mix)
>> +{
>> + unsigned int div_mask = (1 << mix->reg_info.width_div) - 1;
>> +
>> + if (mix->div_flags & CLK_DIVIDER_ONE_BASED)
>> + return div_mask;
>> + if (mix->div_flags & CLK_DIVIDER_POWER_OF_TWO)
>> + return 1 << div_mask;
>> +
>> + return div_mask + 1;
>> +}
>> +
>> +static unsigned int _get_div(struct asr_clk_mix *mix, unsigned int val)
>> +{
>> +
>> + if (mix->div_flags & CLK_DIVIDER_ONE_BASED)
>> + return val;
>> + if (mix->div_flags & CLK_DIVIDER_POWER_OF_TWO)
>> + return 1 << val;
>> +
>> + return val + 1;
>> +}
>> +
>> +static unsigned int _get_div_val(struct asr_clk_mix *mix, unsigned int div)
>> +{
>> + if (mix->div_flags & CLK_DIVIDER_ONE_BASED)
>> + return div;
>> + if (mix->div_flags & CLK_DIVIDER_POWER_OF_TWO)
>> + return __ffs(div);
>> +
>> + return div - 1;
>> +}
>> +
>> +static void _filter_clk_table(struct asr_clk_mix *mix,
>> + struct asr_clk_mix_clk_table *table,
>> + unsigned int table_size)
>> +{
>> + int i;
>> + struct asr_clk_mix_clk_table *item;
>> + struct clk_hw *parent, *hw;
>> + unsigned long parent_rate;
>> +
>> + hw = &mix->hw;
>> +
>> + for (i = 0; i < table_size; i++) {
>> + item = &table[i];
>> + parent = clk_hw_get_parent_by_index(hw, item->parent_index);
>> + parent_rate = clk_hw_get_rate(parent);
>> + if (parent_rate % item->rate) {
>> + item->valid = 0;
>> + } else {
>> + item->divisor = parent_rate / item->rate;
>> + item->valid = 1;
>> + }
>> + }
>> +}
>> +
>> +static int _set_rate(struct asr_clk_mix *mix, u32 mux_val, u32 div_val,
>> + unsigned int change_mux, unsigned int change_div)
>> +{
>> + struct asr_clk_mix_reg_info *ri = &mix->reg_info;
>> + u8 width, shift;
>> + u32 mux_div;
>> + unsigned long flags = 0;
>> +
>> + if (!change_mux && !change_div)
>> + return -EINVAL;
>> +
>> + if (mix->lock)
>> + spin_lock_irqsave(mix->lock, flags);
>> +
>> + mux_div = clk_readl(ri->reg_clk_ctrl);
>> +
>> + if (change_div) {
>> + width = ri->width_div;
>> + shift = ri->shift_div;
>> + mux_div &= ~ASR_CLK_BITS_MASK(width, shift);
>> + mux_div |= ASR_CLK_BITS_SET_VAL(div_val, width, shift);
>> + }
>> +
>> + if (change_mux) {
>> + width = ri->width_mux;
>> + shift = ri->shift_mux;
>> + mux_div &= ~ASR_CLK_BITS_MASK(width, shift);
>> + mux_div |= ASR_CLK_BITS_SET_VAL(mux_val, width, shift);
>> + }
>> +
>> + clk_writel(mux_div, ri->reg_clk_ctrl);
>> +
>> + if (mix->lock)
>> + spin_unlock_irqrestore(mix->lock, flags);
>> +
>> + return 0;
>> +}
>> +
>> +static int asr_clk_mix_determine_rate(struct clk_hw *hw,
>> + struct clk_rate_request *req)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> + struct asr_clk_mix_clk_table *item;
>> + struct clk_hw *parent, *parent_best;
>> + unsigned long parent_rate, mix_rate, mix_rate_best, parent_rate_best;
>> + unsigned long gap, gap_best;
>> + u32 div_val_max;
>> + unsigned int div;
>> + int i, j;
>> +
>> + mix_rate_best = 0;
>> + parent_rate_best = 0;
>> + gap_best = ULONG_MAX;
>> + parent_best = NULL;
>> +
>> + if (mix->table) {
>> + for (i = 0; i < mix->table_size; i++) {
>> + item = &mix->table[i];
>> + if (item->valid == 0)
>> + continue;
>> + parent = clk_hw_get_parent_by_index(hw,
>> + item->parent_index);
>> + parent_rate = clk_hw_get_rate(parent);
>> + mix_rate = parent_rate / item->divisor;
>> + gap = abs(mix_rate - req->rate);
>> + if (parent_best == NULL || gap < gap_best) {
>> + parent_best = parent;
>> + parent_rate_best = parent_rate;
>> + mix_rate_best = mix_rate;
>> + gap_best = gap;
>> + if (gap_best == 0)
>> + goto found;
>> + }
>> + }
>> + } else {
>> + for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
>> + parent = clk_hw_get_parent_by_index(hw, i);
>> + parent_rate = clk_hw_get_rate(parent);
>> + div_val_max = _get_maxdiv(mix);
>> + for (j = 0; j < div_val_max; j++) {
>> + div = _get_div(mix, j);
>> + mix_rate = parent_rate / div;
>> + gap = abs(mix_rate - req->rate);
>> + if (parent_best == NULL || gap < gap_best) {
>> + parent_best = parent;
>> + parent_rate_best = parent_rate;
>> + mix_rate_best = mix_rate;
>> + gap_best = gap;
>> + if (gap_best == 0)
>> + goto found;
>> + }
>> + }
>> + }
>> + }
>> +
>> +found:
>> + if (!parent_best)
>> + return -EINVAL;
>> +
>> + req->best_parent_rate = parent_rate_best;
>> + req->best_parent_hw = parent_best;
>> + req->rate = mix_rate_best;
>> +
>> + return 0;
>> +}
>> +
>> +static int asr_clk_mix_set_rate_and_parent(struct clk_hw *hw,
>> + unsigned long rate,
>> + unsigned long parent_rate,
>> + u8 index)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> + unsigned int div;
>> + u32 div_val;
>> +
>> + div = parent_rate / rate;
>> + div_val = _get_div_val(mix, div);
>> +
>> + return _set_rate(mix, index, div_val, 1, 1);
>> +}
>> +
>> +static u8 asr_clk_mix_get_parent(struct clk_hw *hw)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> + struct asr_clk_mix_reg_info *ri = &mix->reg_info;
>> + unsigned long flags = 0;
>> + u32 mux_div = 0;
>> + u8 width, shift;
>> + u32 mux_val;
>> +
>> + if (mix->lock)
>> + spin_lock_irqsave(mix->lock, flags);
>> +
>> + mux_div = clk_readl(ri->reg_clk_ctrl);
>> +
>> + if (mix->lock)
>> + spin_unlock_irqrestore(mix->lock, flags);
>> +
>> + width = mix->reg_info.width_mux;
>> + shift = mix->reg_info.shift_mux;
>> +
>> + mux_val = ASR_CLK_BITS_GET_VAL(mux_div, width, shift);
>> +
>> + return mux_val;
>> +}
>> +
>> +static unsigned long asr_clk_mix_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> + struct asr_clk_mix_reg_info *ri = &mix->reg_info;
>> + unsigned long flags = 0;
>> + u32 mux_div = 0;
>> + u8 width, shift;
>> + unsigned int div;
>> +
>> + if (mix->lock)
>> + spin_lock_irqsave(mix->lock, flags);
>> +
>> + mux_div = clk_readl(ri->reg_clk_ctrl);
>> +
>> + if (mix->lock)
>> + spin_unlock_irqrestore(mix->lock, flags);
>> +
>> + width = mix->reg_info.width_div;
>> + shift = mix->reg_info.shift_div;
>> +
>> + div = _get_div(mix, ASR_CLK_BITS_GET_VAL(mux_div, width, shift));
>> +
>> + return parent_rate / div;
>> +}
>> +
>> +static int asr_clk_set_parent(struct clk_hw *hw, u8 index)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> + struct asr_clk_mix_clk_table *item;
>> + int i;
>> + u32 div_val, mux_val;
>> +
>> + if (mix->table) {
>> + for (i = 0; i < mix->table_size; i++) {
>> + item = &mix->table[i];
>> + if (item->valid == 0)
>> + continue;
>> + if (item->parent_index == index)
>> + break;
>> + }
>> + if (i < mix->table_size) {
>> + div_val = _get_div_val(mix, item->divisor);
>> + mux_val = item->parent_index;
>> + } else
>> + return -EINVAL;
>> + } else {
>> + mux_val = index;
>> + div_val = 0;
>> + }
>> +
>> + return _set_rate(mix, mux_val, div_val, 1, div_val ? 1 : 0);
>> +}
>> +
>> +static int asr_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long best_parent_rate)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> + struct asr_clk_mix_clk_table *item;
>> + unsigned long parent_rate;
>> + unsigned int best_divisor;
>> + struct clk_hw *parent;
>> + int i;
>> +
>> + best_divisor = best_parent_rate / rate;
>> +
>> + if (mix->table) {
>> + for (i = 0; i < mix->table_size; i++) {
>> + item = &mix->table[i];
>> + if (item->valid == 0)
>> + continue;
>> + parent = clk_hw_get_parent_by_index(hw,
>> + item->parent_index);
>> + parent_rate = clk_hw_get_rate(parent);
>> + if (parent_rate == best_parent_rate
>> + && item->divisor == best_divisor)
> Please write this condition like so:
>
> if (parent_rate == best_parent_rate &&
> item->divisor == best_divisor)

OK.


>
>
>> + break;
>> + }
>> + if (i < mix->table_size)
>> + return _set_rate(mix, item->parent_index,
>> + _get_div_val(mix, item->divisor),
>> + 1, 1);
>> + else
>> + return -EINVAL;
> No need for an else statement. I'm surprised checkpatch.pl doesn't
> complain. It's better to reverse the test. Right now this is doing
> "success handling" but it's better to do "error handling".
>
> if (i >= mix->table_size)
> return -EINVAL;
> return _set_rate(mix, item->parent_index,
> _get_div_val(mix, item->divisor), 1, 1);
>
> That let's you pull the success path in one indent level so it makes it
> easier to stay within the 80 character limit.

You're right, and it's better. Thanks.


>
>
>> + } else {
>> + for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
>> + parent = clk_hw_get_parent_by_index(hw, i);
>> + parent_rate = clk_hw_get_rate(parent);
>> + if (parent_rate == best_parent_rate)
>> + break;
>> + }
>> + if (i < clk_hw_get_num_parents(hw))
>> + return _set_rate(mix, i,
>> + _get_div_val(mix, best_divisor), 1, 1);
>> + else
>> + return -EINVAL;
> Same.

OK.


>
>> + }
>> +}
>> +
>> +static void asr_clk_mix_init(struct clk_hw *hw)
>> +{
>> + struct asr_clk_mix *mix = to_clk_mix(hw);
>> +
>> + if (mix->table)
>> + _filter_clk_table(mix, mix->table, mix->table_size);
>> +}
>> +
>> +const struct clk_ops asr_clk_mix_ops = {
>> + .determine_rate = asr_clk_mix_determine_rate,
>> + .set_rate_and_parent = asr_clk_mix_set_rate_and_parent,
>> + .set_rate = asr_clk_set_rate,
>> + .set_parent = asr_clk_set_parent,
>> + .get_parent = asr_clk_mix_get_parent,
>> + .recalc_rate = asr_clk_mix_recalc_rate,
>> + .init = asr_clk_mix_init,
>> +};
>> +
>> +struct clk *asr_clk_register_mix(struct device *dev,
>> + const char *name,
>> + const char **parent_names,
>> + u8 num_parents,
>> + unsigned long flags,
>> + struct asr_clk_mix_config *config,
>> + spinlock_t *lock)
>> +{
>> + struct asr_clk_mix *mix;
>> + struct clk *clk;
>> + struct clk_init_data init;
>> + size_t table_bytes;
>> +
>> + mix = kzalloc(sizeof(*mix), GFP_KERNEL);
>> + if (!mix)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.flags = flags | CLK_GET_RATE_NOCACHE;
>> + init.parent_names = parent_names;
>> + init.num_parents = num_parents;
>> + init.ops = &asr_clk_mix_ops;
>> +
>> + memcpy(&mix->reg_info, &config->reg_info, sizeof(config->reg_info));
>> + if (config->table) {
> In real life terms "config" is always sdh_mix_config, right? So table
> is always non-NULL. What's the point of having a NULL table? It feels
> like we have a bunch of code to handle a condition which never happens,
> and I don't the code well enough to say if it's a reasonable feature to
> add in the futuree..

In this patch, indeed table is always non-NULL. There are other clocks,
like VPU/GPU clock. The clock controls are a little different than the
basic clocks in this patch. So I plan to add them in another patch
later. GPU clock does have a NULL table. From this aspect, GPU clock
might not use this register type. I'll remove the test here. Thanks.


>
>> + table_bytes = sizeof(*config->table) * config->table_size;
>> + mix->table = kmemdup(config->table,
>> + table_bytes, GFP_KERNEL);
> This can fit on one line:
>
> mix->table = kmemdup(config->table, table_bytes, GFP_KERNEL);

OK.


>
>
>> + if (!mix->table) {
>> + kfree(mix);
>> + return ERR_PTR(-ENOMEM);
>> + }
>> + mix->table_size = config->table_size;
>> + }
>> +
>> + mix->lock = lock;
>> + mix->hw.init = &init;
>> +
>> + clk = clk_register(dev, &mix->hw);
>> +
>> + if (IS_ERR(clk)) {
>> + kfree(mix->table);
>> + kfree(mix);
>> + }
>> +
>> + return clk;
>> +}
>> diff --git a/drivers/clk/asr/clk-pll.c b/drivers/clk/asr/clk-pll.c
>> new file mode 100644
>> index 0000000..2087fbb
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk-pll.c
>> @@ -0,0 +1,642 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * clock pll driver file for asr-8751c
>> + *
>> + * Copyright (C) 2019 ASR Microelectronics(Shanghai) Co., Ltd.
>> + * Kevin Liu <kevinliu@xxxxxxxxxxxx>
>> + * Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
> ^^^^^

I'll fix it.


>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/delay.h>
>> +#include "clk.h"
>> +#include "clk-pll.h"
>> +
>> +#define pll_readl_cr(p) clk_readl(p->params->cr_reg)
>> +#define pll_readl_pll_swcr(p) clk_readl(p->params->pll_swcr)
>> +#define pll_readl_pll_swcr2(p) clk_readl(p->params->pll_swcr2)
>> +#define pll_writel_cr(val, p) clk_writel(val, p->params->cr_reg)
>> +#define pll_writel_pll_swcr(val, p) clk_writel(val, p->params->pll_swcr)
>> +#define pll_writel_pll_swcr2(val, p) clk_writel(val, p->params->pll_swcr2)
>> +
>> +/* unified pllx_cr for pll2~5 */
>> +union pllx_cr {
>> + struct {
>> + unsigned int frcdiv:8;
>> + unsigned int fbdiv:7;
>> + unsigned int reserved:4;
>> + unsigned int pu:1;
>> + unsigned int reserved1:4;
>> + unsigned int ssd:4;
>> + unsigned int ssdx2:1;
>> + unsigned int folock_en:1;
>> + unsigned int ssmod:2;
>> + } b;
>> + unsigned int v;
>> +};
>> +
>> +/* unified pll SW control register for pll1~5 */
>> +union pllx_swcr {
>> + struct {
>> + unsigned int reserved:7;
>> + unsigned int band_sel:1;
>> + unsigned int pumpcur:2;
>> + unsigned int falock_en:1;
>> + unsigned int kvco:3;
>> + unsigned int regvol:2;
>> + unsigned int bypass:1;
>> + unsigned int lockdly:3;
>> + unsigned int folock_en:1;
>> + unsigned int mod_sel:1;
>> + unsigned int te_sel:2;
>> + unsigned int at_en:1;
>> + unsigned int dt_en:1;
>> + unsigned int div1_en:1;
>> + unsigned int div2_en:1;
>> + unsigned int div3_en:1;
>> + unsigned int div4_en:1;
>> + unsigned int div5_en:1;
>> + unsigned int clk_en:1;
>> + } b;
>> + unsigned int v;
>> +};
>> +
>> +/* pll SW control register for pll6/7 */
>> +union pllx_swcr_new {
>> + struct {
>> + unsigned int fbdiv:7;
>> + unsigned int band_sel:1;
>> + unsigned int pumpcur:2;
>> + unsigned int falock_en:1;
>> + unsigned int kvco:3;
>> + unsigned int regvol:2;
>> + unsigned int bypass:1;
>> + unsigned int lockdly:3;
>> + unsigned int folock_en:1;
>> + unsigned int mod_sel:1;
>> + unsigned int te_sel:2;
>> + unsigned int at_en:1;
>> + unsigned int dt_en:1;
>> + unsigned int div1_en:1;
>> + unsigned int div2_en:1;
>> + unsigned int div3_en:1;
>> + unsigned int div4_en:1;
>> + unsigned int div5_en:1;
>> + unsigned int pu:1;
>> + } b;
>> + unsigned int v;
>> +};
>> +
>> +/* pll SW control register2 for pll6 */
>> +union pllx_swcr2 {
>> + struct {
>> + unsigned int frcdiv:8;
>> + unsigned int ssd:4;
>> + unsigned int ssdx2:1;
>> + unsigned int folock_en:1;
>> + unsigned int ssmod:2;
>> + unsigned int reserved:15;
>> + unsigned int locked:1;
>> + } b;
>> + unsigned int v;
>> +};
>> +
>> +/* pll SW control register2 for pll7 */
>> +union pllx_swcr2_frac {
>> + struct {
>> + unsigned int frcdiv:24;
>> + unsigned int reserved:7;
>> + unsigned int locked:1;
>> + } b;
>> + unsigned int v;
>> +};
>> +
>> +static struct kvco_range kvco_rng_table[] = {
>> + /* High band */
>> + {2620, 2780, 0x7, 1},
>> + {2470, 2620, 0x6, 1},
>> + {2320, 2470, 0x5, 1},
>> + {2140, 2320, 0x4, 1},
>> + {1970, 2140, 0x3, 1},
>> + {1820, 1970, 0x2, 1},
>> + {1670, 1820, 0x1, 1},
>> + {1510, 1670, 0x0, 1},
>> + /* Low band - prefer high band */
>> + {1600, 1760, 0x7, 0},
>> + {1450, 1600, 0x6, 0},
>> + {1300, 1450, 0x5, 0},
>> + {1140, 1300, 0x4, 0},
>> + {970, 1140, 0x3, 0},
>> + {820, 970, 0x2, 0},
>> + {680, 820, 0x1, 0},
>> + {540, 680, 0x0, 0},
>> +};
>> +
>> +static int __pll_is_enabled(struct clk_hw *hw)
>> +{
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + union pllx_cr pllx_cr;
>> + union pllx_swcr_new pllx_swcr_new;
>> + unsigned int enabled;
>> +
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr_new.v = pll_readl_pll_swcr(vco);
>> + enabled = pllx_swcr_new.b.pu;
>> + } else {
>> + pllx_cr.v = pll_readl_cr(vco);
>> + enabled = pllx_cr.b.pu;
>> + }
>> +
>> + return enabled;
>> +}
>> +
>> +static void __clk_vco_rate2reg(struct clk_vco *vco, unsigned long rate,
>> + unsigned int *kvco, unsigned int *band)
>> +{
>> + int i, size;
>> +
>> + size = ARRAY_SIZE(kvco_rng_table);
> No need for the "size" variable. Use ARRAY_SIZE() directly.

OK.


>
>> +
>> + for (i = 0; i < size; i++) {
>> + if (rate >= kvco_rng_table[i].vco_min &&
>> + rate <= kvco_rng_table[i].vco_max) {
>> + *kvco = kvco_rng_table[i].kvco;
>> + *band = kvco_rng_table[i].band;
>> + return;
>> + }
>> + }
>> + if (i == size)
>> + panic("can't find correct vco\n");
> DON'T PANIC!!!!
>
> :P

I'll fix it.


>
>> +}
>> +
>> +/* frequency unit Mhz, return pll vco freq */
>> +static unsigned long __get_vco_freq(struct clk_hw *hw)
>> +{
>> + unsigned int pllx_vco, pllxfrcd, pllxfbd;
>> + unsigned long pllx_vco_l, rate;
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + union pllx_cr pllx_cr;
>> + union pllx_swcr_new pllx_swcr_new;
>> + union pllx_swcr pllx_swcr;
>> + union pllx_swcr2 pllx_swcr2;
>> + union pllx_swcr2_frac pllx_swcr2_frac;
>> + bool hiband;
>> +
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr_new.v = pll_readl_pll_swcr(vco);
>> + pllxfbd = pllx_swcr_new.b.fbdiv & 0x7f;
> ^^^^^^^^^^^^
> There is no need for this mask.

I'll fix all the mask issue.


>
>> + if (vco->flags & ASR_PLL_FRAC_AUDIO) {
>> + pllx_swcr2_frac.v = pll_readl_pll_swcr2(vco);
>> + pllxfrcd = pllx_swcr2_frac.b.frcdiv & 0x3fffff;
> ^^^^^^^^^^^^^^^^^
> Is this required?
>
>> + } else {
>> + pllx_swcr2.v = pll_readl_pll_swcr2(vco);
>> + pllxfrcd = pllx_swcr2.b.frcdiv & 0xff;
> ^^^^^^^^^^^^^
>
>> + }
>> + hiband = !!pllx_swcr_new.b.band_sel;
>> + } else {
>> + pllx_cr.v = pll_readl_cr(vco);
>> + pllxfrcd = pllx_cr.b.frcdiv & 0xff;
>> + pllxfbd = pllx_cr.b.fbdiv & 0x7f;
> Masks.
>
>> + pllx_swcr.v = pll_readl_pll_swcr(vco);
>> + hiband = !!pllx_swcr.b.band_sel;
> No need for the !!.

OK.


>
>> + }
>> +
>> + if (pllxfrcd) {
>> + if (((vco->flags & ASR_PLL_REG_NEW) && (vco->flags & ASR_PLL_FRAC_AUDIO))) {
> Over 80 characters. Too many parens. Write it like this:
>
> if ((vco->flags & ASR_PLL_REG_NEW) &&
> (vco->flags & ASR_PLL_FRAC_AUDIO)) {
>
>
>> + if (pllxfrcd <= (1 << 20)) {
>> + pllx_vco_l = (unsigned long)pllxfbd * 26 * MHZ +
>> + DIV_ROUND_UP((unsigned long)pllxfrcd * 26 * MHZ, (1 << 20));
> Are these casts required? It looks like the code assumes long is 64
> bits, but even on 64 bit systems we can build a 32 bit kernel so it's
> not always true.
>
> My eyes get mixed up between pllxfbd and pllxfrcd... :( They say that
> people only use the first and last letters to read. Like you can jumble
> up all the middle letters and text is still readable.

Understood. will use more readable names.


>
> "It deosn't mttaer in waht oredr the ltteers in a wrod are, the olny
> iprmoetnt tihng is taht the frist and lsat ltteer be at the rghit
> pclae. The rset can be a toatl mses and you can sitll raed it wouthit
> porbelm. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by
> istlef, but the wrod as a wlohe."

:)


>
> Meanwhile, I understand that the names come directly from the hardware
> devs so they are terrible and there is nothing we can do to fix it...
> But I'm just complaining that it makes it very hard to read.

I'll fix it.


>
> We could make a function:
> static unsigned int pllx_rate(unsigned int pllx_val)
> {
> return pllxfbd * 26 * MHZ;
> }
>
> pllx_vco_l = pllx_rate(pllxfbd) +
> DIV_ROUND_UP(pllx_rate(pllxfrcd), (1 << 20));
>
> I don't know...
>
>> + } else if ((pllxfrcd >= (3 << 20)) && (pllxfbd >= 1)) {
>> + pllx_vco_l = (unsigned long)pllxfbd * 26 * MHZ -
>> + DIV_ROUND_UP(((1 << 22) - (unsigned long)pllxfrcd) * 26 * MHZ, (1 << 20));
>> + } else {
>> + pr_err("%s fraction divider %u is invalid\n", __clk_get_name(hw->clk), pllxfrcd);
>> + panic("invalid fraction divider\n");
> Remove the panic() please.

I'll fix it.


>
>> + }
>> + rate = DIV_ROUND_UP(pllx_vco_l, 50) * 50;
> rate = roundup(pllx_vco_l, 50);

OK.


>
>
>> + } else {
>> + if (pllxfrcd <= (1 << 6)) {
>> + pllx_vco = pllxfbd * 26 + DIV_ROUND_UP(pllxfrcd * 26, 64);
>> + } else if ((pllxfrcd >= (3 << 6)) && (pllxfbd >= 1)) {
>> + pllx_vco = pllxfbd * 26 + DIV_ROUND_UP(pllxfrcd * 26, 64) - 104;
>> + } else {
>> + pr_err("%s fraction divider %u is invalid\n", __clk_get_name(hw->clk), pllxfrcd);
>> + panic("invalid fraction divider\n");
> panic()

I'll fix it.


>
>> + }
>> + rate = pllx_vco * MHZ;
>> + }
>> + } else {
>> + rate = 26 * MHZ * pllxfbd;
>> + }
>> +
>> + if (hiband)
>> + rate = rate * 2;
>> +
>> + return rate;
>> +}
>> +
>> +static void __pll_vco_cfg(struct clk_vco *vco)
>> +{
>> + union pllx_swcr pllx_swcr;
>> + union pllx_swcr_new pllx_swcr_new;
>> +
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr_new.v = pll_readl_pll_swcr(vco);
>> + pllx_swcr_new.b.at_en = 0;
>> + pllx_swcr_new.b.dt_en = 0;
>> + pllx_swcr_new.b.te_sel = 0;
>> + pllx_swcr_new.b.mod_sel = (vco->flags & ASR_PLL_FRAC_FEAT) ? 0 : 1;
>> + pllx_swcr_new.b.folock_en = 0;
>> + pllx_swcr_new.b.lockdly = 1;
>> + pllx_swcr_new.b.bypass = 0;
>> + pllx_swcr_new.b.regvol = 1;
>> + pllx_swcr_new.b.falock_en = 1;
>> + pllx_swcr_new.b.pumpcur = 1;
>> + pll_writel_pll_swcr(pllx_swcr_new.v, vco);
>> + } else {
>> + pllx_swcr.v = pll_readl_pll_swcr(vco);
>> + pllx_swcr.b.at_en = 0;
>> + pllx_swcr.b.dt_en = 0;
>> + pllx_swcr.b.te_sel = 0;
>> + pllx_swcr.b.mod_sel = (vco->flags & ASR_PLL_FRAC_FEAT) ? 0 : 1;
>> + pllx_swcr.b.folock_en = 0;
>> + pllx_swcr.b.lockdly = 1;
>> + pllx_swcr.b.bypass = 0;
>> + pllx_swcr.b.regvol = 1;
>> + pllx_swcr.b.falock_en = 1;
>> + pllx_swcr.b.pumpcur = 1;
>> + pll_writel_pll_swcr(pllx_swcr.v, vco);
>> + }
>> +}
>> +
>> +/* FIXME: set preset parameters directly rather than compute from rate */
>> +static void enable_pll_ssc(struct clk_vco *vco)
>> +{
>> + struct asr_vco_params *vco_params = vco->params;
>> + union pllx_cr pllx_cr;
>> + unsigned long flags;
>> + union pllx_swcr2 pllx_swcr2;
>> +
>> + spin_lock_irqsave(vco->lock, flags);
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr2.v = pll_readl_pll_swcr2(vco);
>> + pllx_swcr2.b.ssd = vco_params->ssc_depth & 0xf;
> The mask isn't really required.

I'll fix it.


>
>> + pllx_swcr2.b.ssdx2 = vco_params->ssc_depx2_en ? 0x1 : 0x0;
> Could you use "vco_params->ssc_depx2_en ? 1 : 0". No need for hex.

OK.


>
>> + pllx_swcr2.b.folock_en = vco_params->ssc_folock_en ? 0x1 : 0x0;
>> + pllx_swcr2.b.ssmod = vco_params->ssc_mode & 0x3;
>> + pll_writel_pll_swcr2(pllx_swcr2.v, vco);
>> + } else {
>> + pllx_cr.v = pll_readl_cr(vco);
>> + /* SSC will be enabled if scc depth is not 0 */
>> + pllx_cr.b.ssd = vco_params->ssc_depth & 0xf;
>> + pllx_cr.b.ssdx2 = vco_params->ssc_depx2_en ? 0x1 : 0x0;
>> + pllx_cr.b.folock_en = vco_params->ssc_folock_en ? 0x1 : 0x0;
>> + pllx_cr.b.ssmod = vco_params->ssc_mode & 0x3;
>> + pll_writel_cr(pllx_cr.v, vco);
>> + }
>> + spin_unlock_irqrestore(vco->lock, flags);
>> +}
>> +
>> +static void disable_pll_ssc(struct clk_vco *vco)
>> +{
>> + struct asr_vco_params *vco_params = vco->params;
>> + union pllx_cr pllx_cr;
>> + unsigned long flags;
>> + union pllx_swcr2 pllx_swcr2;
>> +
>> + spin_lock_irqsave(vco->lock, flags);
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr2.v = pll_readl_pll_swcr2(vco);
>> + pllx_swcr2.b.ssd = 0x0;
>> + pllx_swcr2.b.ssdx2 = 0x0;
>> + pllx_swcr2.b.folock_en = 0x0;
>> + pllx_swcr2.b.ssmod = vco_params->ssc_mode & 0x3;
>> + pll_writel_pll_swcr2(pllx_swcr2.v, vco);
>> + } else {
>> + pllx_cr.v = pll_readl_cr(vco);
>> + /* SSC will be disabled if scc depth is 0 */
>> + pllx_cr.b.ssd = 0x0;
>> + pllx_cr.b.ssdx2 = 0x0;
>> + pllx_cr.b.folock_en = 0x0;
>> + pllx_cr.b.ssmod = 0x0;
>> + pll_writel_cr(pllx_cr.v, vco);
>> + }
>> + spin_unlock_irqrestore(vco->lock, flags);
>> +}
>> +
>> +static void clk_pll_vco_init(struct clk_hw *hw)
>> +{
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + unsigned long vco_rate;
>> + unsigned int vco_rngl, vco_rngh, tmp;
>> + struct asr_vco_params *params = vco->params;
>> +
>> + if (!__pll_is_enabled(hw)) {
>> + __pll_vco_cfg(vco);
> return here.
>
>> + } else {
> Then pull the else statement in one indent level.

OK.


>
>> + vco_rate = __get_vco_freq(hw) / MHZ;
>> + if (!(vco->flags & ASR_PLL_SKIP_DEF_RATE)) {
>> + /* check whether vco is in the range of 2% our expectation */
>> + tmp = params->default_rate / MHZ;
>> + if (tmp != vco_rate) {
>> + vco_rngh = tmp + tmp * 2 / 100;
>> + vco_rngl = tmp - tmp * 2 / 100;
>> + if (!((vco_rngl <= vco_rate) &&
>> + (vco_rate <= vco_rngh)))
>> + panic("wrong vco_rate\n");
> panic.

I'll fix it.


>
>> + }
>> + }
>> + /* Make sure SSC is enabled if pll is on */
>> + if (vco->flags & ASR_PLL_SSC_FEAT) {
>> + enable_pll_ssc(vco);
>> + params->ssc_enabled = true;
>> + }
>> + pr_debug("%s is enabled @ %lu\n", __clk_get_name(hw->clk), vco_rate * MHZ);
>> + }
>> +}
>> +
>> +static int clk_pll_vco_enable(struct clk_hw *hw)
>> +{
>> + unsigned int delaytime = 50;
>> + unsigned long flags;
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + struct asr_vco_params *params = vco->params;
>> + union pllx_cr pllx_cr;
>> + union pllx_swcr_new pllx_swcr_new;
>> +
>> + if (__pll_is_enabled(hw))
>> + return 0;
>> +
>> + spin_lock_irqsave(vco->lock, flags);
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr_new.v = pll_readl_pll_swcr(vco);
>> + pllx_swcr_new.b.pu = 1;
>> + pll_writel_pll_swcr(pllx_swcr_new.v, vco);
>> + } else {
>> + pllx_cr.v = pll_readl_cr(vco);
>> + pllx_cr.b.pu = 1;
>> + pll_writel_cr(pllx_cr.v, vco);
>> + }
>> + spin_unlock_irqrestore(vco->lock, flags);
>> +
>> + /* check lock status */
>> + udelay(50);
>> + while ((!(__raw_readl(params->lock_reg) & params->lock_enable_bit))
>> + && delaytime) {
> Remove extra parens. Move the && to the line before. "delaytime" is
> not really "time" it's the number of iteration. "time" would be
> iterations multiplied by five.
>
> while (!(__raw_readl(params->lock_reg) & params->lock_enable_bit) &&
> delay) {
OK.
>> + udelay(5);
>> + delaytime--;
>> + }
>> +
>> + /* PLL can't get to stable status in time on emulators or FPGA */
>> + if (unlikely(!delaytime)) {
> Remove the unlikely().

OK.


>
>> + pr_err("%s enabling didn't get stable within 300us!!!\n", __clk_get_name(hw->clk));
>> + return -EBUSY;
>> + }
>> +
>> + if (vco->flags & ASR_PLL_SSC_FEAT)
>> + if (((vco->flags & ASR_PLL_SSC_AON) && !params->ssc_enabled)
>> + || !(vco->flags & ASR_PLL_SSC_AON)) {
> Move the || to the line before. But actually this is testing
> ASR_PLL_SSC_AON twice. It can fit on one line:
>
> if (!(vco->flags & ASR_PLL_SSC_AON) || !params->ssc_enabled) {

OK.


>
>
>> + enable_pll_ssc(vco);
>> + params->ssc_enabled = true;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void clk_pll_vco_disable(struct clk_hw *hw)
>> +{
>> + unsigned long flags;
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + struct asr_vco_params *params = vco->params;
>> + union pllx_cr pllx_cr;
>> + union pllx_swcr_new pllx_swcr_new;
>> +
>> + spin_lock_irqsave(vco->lock, flags);
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr_new.v = pll_readl_pll_swcr(vco);
>> + pllx_swcr_new.b.pu = 0;
>> + pll_writel_pll_swcr(pllx_swcr_new.v, vco);
>> + } else {
>> + pllx_cr.v = pll_readl_cr(vco);
>> + pllx_cr.b.pu = 0;
>> + pll_writel_cr(pllx_cr.v, vco);
>> + }
>> + spin_unlock_irqrestore(vco->lock, flags);
>> +
>> + if ((vco->flags & ASR_PLL_SSC_FEAT) &&
>> + !(vco->flags & ASR_PLL_SSC_AON)) {
>> + disable_pll_ssc(vco);
>> + params->ssc_enabled = false;
>> + }
>> +}
>> +
>> +/*
>> + * pll rate change requires sequence:
>> + * clock off -> change rate setting -> clock on
>> + * This function doesn't really change rate, but cache the config
>> + */
>> +static int clk_pll_vco_setrate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + unsigned int i, kvco = 0, band, fbd, frcd;
>> + unsigned long flags;
>> + unsigned long new_rate = rate, old_rate;
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + struct asr_vco_params *params = vco->params;
>> + union pllx_swcr pllx_swcr;
>> + union pllx_swcr_new pllx_swcr_new;
>> + union pllx_swcr2 pllx_swcr2;
>> + union pllx_swcr2_frac pllx_swcr2_frac;
>> + union pllx_cr pllx_cr;
>> +
>> + old_rate = __get_vco_freq(hw);
>> + /* setp 1: calculate fbd frcd kvco and band */
>> + if (params->freq_table) {
>> + for (i = 0; i < params->freq_table_size; i++) {
>> + if (rate == params->freq_table[i].output_rate) {
>> + kvco = params->freq_table[i].kvco;
>> + band = params->freq_table[i].band;
>> + frcd = params->freq_table[i].frcd;
>> + fbd = params->freq_table[i].fbd;
>> + break;
>> + }
>> + }
>> + if (i == params->freq_table_size)
>> + panic("can't find correct vco\n");
> panic

I'll fix it.


>
>> + } else {
>> + __clk_vco_rate2reg(vco, rate / MHZ, &kvco, &band);
>> + if (band)
>> + rate = rate / 2;
>> + if (vco->flags & ASR_PLL_FRAC_AUDIO) {
>> + /* Fraction audio PLL diviation is within 24Hz so round the rate by 50Hz */
>> + if (rate % 50) {
>> + rate = rate / 50 * 50;
> rate = roundown(rate, 50);

I'll fix it.


>
>> + pr_debug("%s Truncate the rate set for %s from %luHz to %luHz\n",
>> + __func__, __clk_get_name(hw->clk), new_rate, band ? rate * 2 : rate);
>> + new_rate = band ? (rate * 2) : rate;
>> + }
>> + fbd = rate / (26 * MHZ);
>> + frcd = rate % (26 * MHZ);
>> + if (frcd > 13 * MHZ) {
>> + fbd++;
>> + frcd = (3 << 20) + (unsigned long)frcd * (1 << 20) / (26 * MHZ);
>> + } else {
>> + frcd = (unsigned long)frcd * (1 << 20) / (26 * MHZ);
>> + }
>> + } else {
>> + /* The other PLL diviation is within 1Mhz so round the rate by 1Mhz */
>> + if (rate % MHZ) {
>> + rate = rate / MHZ * MHZ;
>> + pr_debug("%s Truncate the rate set for %s from %luHz to %luHz\n",
>> + __func__, __clk_get_name(hw->clk), new_rate, band ? rate * 2 : rate);
>> + new_rate = band ? (rate * 2) : rate;
>> + }
>> + rate /= MHZ;
>> + fbd = rate / 26;
>> + frcd = rate % 26;
>> + if (frcd > 13) {
>> + fbd++;
>> + frcd = 192 + (frcd * 64 / 26);
>> + } else {
>> + frcd = frcd * 64 / 26;
>> + }
>> + }
>> + }
>> +
>> + spin_lock_irqsave(vco->lock, flags);
>> + /* setp 2: set pll kvco/band and fbd/frcd setting */
>> + if (vco->flags & ASR_PLL_REG_NEW) {
>> + pllx_swcr_new.v = pll_readl_pll_swcr(vco);
>> + pllx_swcr_new.b.kvco = kvco & 0x7;
>> + pllx_swcr_new.b.band_sel = band & 0x1;
>> + pllx_swcr_new.b.fbdiv = fbd & 0x7f;
> Check these masks.

I'll fix all the mask issues.


>
>> + pll_writel_pll_swcr(pllx_swcr_new.v, vco);
>> + if (vco->flags & ASR_PLL_FRAC_AUDIO) {
>> + pllx_swcr2_frac.v = pll_readl_pll_swcr2(vco);
>> + pllx_swcr2_frac.b.frcdiv = frcd & 0x3fffff;
>> + pll_writel_pll_swcr2(pllx_swcr2_frac.v, vco);
>> + } else {
>> + pllx_swcr2.v = pll_readl_pll_swcr2(vco);
>> + pllx_swcr2.b.frcdiv = frcd & 0xff;
>> + pll_writel_pll_swcr2(pllx_swcr2.v, vco);
>> + }
>> + } else {
>> + pllx_swcr.v = pll_readl_pll_swcr(vco);
>> + pllx_swcr.b.kvco = kvco & 0x7;
>> + pllx_swcr.b.band_sel = band & 0x1;
>> + pll_writel_pll_swcr(pllx_swcr.v, vco);
>> + pllx_cr.v = pll_readl_cr(vco);
>> + pllx_cr.b.frcdiv = frcd & 0xff;
>> + pllx_cr.b.fbdiv = fbd & 0x7f;
>> + pll_writel_cr(pllx_cr.v, vco);
>> + }
>> + spin_unlock_irqrestore(vco->lock, flags);
>> +
>> + pr_debug("%s %s rate %lu->%lu!\n", __func__,
>> + __clk_get_name(hw->clk), old_rate, new_rate);
>> + return 0;
>> +}
>> +
>> +static unsigned long clk_vco_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + return __get_vco_freq(hw);
>> +}
>> +
>> +static long clk_vco_round_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long *prate)
>> +{
>> + struct clk_vco *vco = to_clk_vco(hw);
>> + unsigned long max_rate = 0, new_rate = rate;
>> + unsigned int i, band, kvco;
>> + struct asr_vco_params *params = vco->params;
>> +
>> + if (rate > params->vco_max || rate < params->vco_min) {
>> + pr_err("%lu rate out of range!\n", rate);
>> + return -EINVAL;
>> + }
>> +
>> + if (params->freq_table) {
>> + for (i = 0; i < params->freq_table_size; i++) {
>> + if (params->freq_table[i].output_rate <= rate) {
> Reverse this if statement.
>
> if (params->freq_table[i].output_rate > rate)
> continue;
>
>> + if (max_rate <
>> + params->freq_table[i].output_rate)
>> + max_rate =
>> + params->freq_table[i].output_rate;
> Then fits in 80 characters.
>
> if (max_rate < params->freq_table[i].output_rate)
> max_rate = params->freq_table[i].output_rate;
>
> Better yet, do that but also introduce a temporary variable:
>
> output_rate = params->freq_table[i].output_rate;
>
> if (output_rate > rate)
> continue;
> if (max_rate < output_rate)
> max_rate = output_rate;

OK. Thanks for the tips.


>
>
>> + }
>> + }
>> + } else {
>> + __clk_vco_rate2reg(vco, rate / MHZ, &kvco, &band);
>> + if (band)
>> + rate = rate / 2;
>> + if (vco->flags & ASR_PLL_FRAC_AUDIO) {
>> + /* Fraction audio PLL diviation is within 24Hz so round the rate by 50Hz */
>> + if (rate % 50) {
>> + rate = rate / 50 * 50;
> rounddown()

OK.


>
>> + pr_debug("%s Truncate the rate set for %s from %luHz to %luHz\n",
>> + __func__, __clk_get_name(hw->clk), new_rate, band ? rate * 2 : rate);
>> + }
>> + } else {
>> + /* The other PLL diviation is within 1Mhz so round the rate by 1Mhz */
>> + if (rate % MHZ) {
>> + rate = rate / MHZ * MHZ;
>> + pr_debug("%s Truncate the rate set for %s from %luHz to %luHz\n",
>> + __func__, __clk_get_name(hw->clk), new_rate, band ? rate * 2 : rate);
>> + }
>> + }
>> + if (band)
>> + max_rate = rate * 2;
>> + else
>> + max_rate = rate;
>> + }
>> + return max_rate;
>> +}
>> +
>> +static const struct clk_ops clk_vco_ops = {
>> + .init = clk_pll_vco_init,
>> + .enable = clk_pll_vco_enable,
>> + .disable = clk_pll_vco_disable,
>> + .set_rate = clk_pll_vco_setrate,
>> + .recalc_rate = clk_vco_recalc_rate,
>> + .round_rate = clk_vco_round_rate,
>> + .is_enabled = __pll_is_enabled,
>> +};
>> +
>> +struct clk *asr_clk_register_vco(const char *name,
>> + const char *parent_name,
>> + unsigned long flags, u32 vco_flags,
>> + spinlock_t *lock,
>> + struct asr_vco_params *params)
>> +{
>> + struct clk_vco *vco;
>> + struct clk *clk;
>> + struct clk_init_data init;
>> +
>> + vco = kzalloc(sizeof(*vco), GFP_KERNEL);
>> + if (!vco)
>> + return NULL;
>> +
>> + init.name = name;
>> + init.ops = &clk_vco_ops;
>> + init.flags = flags | CLK_SET_RATE_GATE;
>> + init.parent_names = (parent_name ? &parent_name : NULL);
>> + init.num_parents = (parent_name ? 1 : 0);
>> +
>> + vco->flags = vco_flags;
>> + vco->lock = lock;
>> + vco->hw.init = &init;
>> + vco->params = params;
>> +
>> + clk = clk_register(NULL, &vco->hw);
>> + if (IS_ERR(clk))
>> + kfree(vco);
>> +
>> + return clk;
> This returns a mix of error pointers and NULLs on error. When code
> returns a mix of error pointers and NULL that means that NULL is *not*
> an error but just a special kind of success. For example if you
> call return_some_subsystem() and it fails then it returns an error, but
> if it returns NULL that means the user disabled that subsystem off. So
> it's not error, but you still don't get a valid pointer.

Understood. I'll fix it.


>
>
>> +}
>> diff --git a/drivers/clk/asr/clk-pll.h b/drivers/clk/asr/clk-pll.h
>> new file mode 100644
>> index 0000000..6c66540
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk-pll.h
>> @@ -0,0 +1,91 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef __ASR_CLK_PLL_H
>> +#define __ASR_CLK_PLL_H
>> +
>> +/*
>> + * struct kvco_range -store kvco and vrng for different frequency range
>> + * @vco_min: min frequency of vco
>> + * @vco_max: max frequency of vco
>> + * @kvco: kvco val for relevant frequency range
>> + * @band: high band or low band
>> + */
>> +struct kvco_range {
>> + int vco_min;
>> + int vco_max;
>> + u8 kvco;
>> + u8 band;
>> +};
>> +
>> +struct asr_vco_freq_table {
>> + unsigned long output_rate;
>> + u16 frcd;
>> + u16 fbd;
>> + u8 kvco;
>> + u8 band;
>> +};
>> +
>> +enum ssc_mode {
>> + CENTER_SPREAD = 0x0,
>> + UP_SPREAD = 0x1,
>> + DOWN_SPREAD = 0x2,
>> +};
>> +
>> +struct asr_vco_params {
>> + unsigned long vco_min;
>> + unsigned long vco_max;
>> + void __iomem *cr_reg;
>> + void __iomem *pll_swcr;
>> + void __iomem *pll_swcr2;
>> + void __iomem *dpll_swcr;
>> + void __iomem *dpll_swcr2;
>> + void __iomem *dpll_ctrl;
>> + void __iomem *lock_reg;
>> + u32 cr_off;
>> + u32 swcr_off;
>> + u32 swcr2_off;
>> + u32 lock_off;
>> + u32 lock_enable_bit;
>> + unsigned long default_rate;
>> +
>> + struct asr_vco_freq_table *freq_table;
>> + int freq_table_size;
>> +
>> + /* SSC setting */
>> + bool ssc_enabled;
>> + enum ssc_mode ssc_mode;
>> + unsigned int ssc_folock_en;
>> + unsigned int ssc_depx2_en;
>> + unsigned int ssc_depth;
>> +};
>> +
>> +struct clk_vco {
>> + struct clk_hw hw;
>> + spinlock_t *lock;
>> + u32 flags;
>> + struct asr_vco_params *params;
>> +};
>> +
>> +#define to_clk_vco(vco_hw) container_of(vco_hw, struct clk_vco, hw)
>> +
>> +/**
>> + * VCO Flags:
>> + */
>> +#define ASR_PLL_SSC_FEAT BIT(0)
>> +#define ASR_PLL_SSC_AON BIT(1)
>> +/*
>> + * For specific pll such as pll3p, don't check default rate to support
>> + * more boot up op.
>> + */
>> +#define ASR_PLL_SKIP_DEF_RATE BIT(2)
>> +#define ASR_PLL_FRAC_FEAT BIT(3)
>> +#define ASR_PLL_REG_NEW BIT(4)
>> +#define ASR_PLL_FRAC_AUDIO BIT(5)
>> +#define ASR_PLL_REG_DDR BIT(6)
>> +
>> +extern struct clk *asr_clk_register_vco(const char *name,
>> + const char *parent_name,
>> + unsigned long flags, u32 vco_flags,
>> + spinlock_t *lock,
>> + struct asr_vco_params *params);
>> +
>> +#endif
>> diff --git a/drivers/clk/asr/clk.c b/drivers/clk/asr/clk.c
>> new file mode 100644
>> index 0000000..6948fc2
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk.c
>> @@ -0,0 +1,222 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * asr clock operation source file
>> + *
>> + * Copyright (C) 2019 ASR Microelectronics(Shanghai) Co., Ltd.
>> + * Gang Wu <gangwu@xxxxxxxxxxxx>
>> + * Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/clk.h>
>> +#include <linux/of_address.h>
>> +
>> +#include "clk.h"
>> +
>> +void asr_clks_enable(char **clk_table, int clk_table_size)
>> +{
>> + int i;
>> + struct clk *clk;
>> +
>> + for (i = 0; i < clk_table_size; i++) {
>> + clk = __clk_lookup(clk_table[i]);
>> + if (!IS_ERR_OR_NULL(clk))
> __clk_lookup() never returns error pointers.

OK. I'll fix it.


>
>> + clk_prepare_enable(clk);
>> + else
>> + pr_err("%s : can't find clk %s\n", __func__,
>> + clk_table[i]);
>> + }
>> +}
>> +
>> +int asr_clk_init(struct device_node *np, struct asr_clk_unit *unit,
>> + int nr_clks)
>> +{
>> + static struct clk **clk_table;
>> +
>> + clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
>> + if (!clk_table)
>> + return -ENOMEM;
>> +
>> + unit->clk_table = clk_table;
>> + unit->nr_clks = nr_clks;
>> + unit->clk_data.clks = clk_table;
>> + unit->clk_data.clk_num = nr_clks;
>> + of_clk_add_provider(np, of_clk_src_onecell_get, &unit->clk_data);
>> +
>> + return 0;
>> +}
>> +
>> +void asr_register_fixed_rate_clks(struct asr_clk_unit *unit,
>> + struct asr_param_fixed_rate_clk *clks,
>> + int size)
>> +{
>> + int i;
>> + struct clk *clk;
>> +
>> + for (i = 0; i < size; i++) {
>> + clk = clk_register_fixed_rate(NULL, clks[i].name,
>> + clks[i].parent_name,
>> + clks[i].flags,
>> + clks[i].fixed_rate);
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: failed to register clock %s\n",
>> + __func__, clks[i].name);
>> + continue;
>> + }
>> + if (clks[i].id)
>> + unit->clk_table[clks[i].id] = clk;
> What's the "clks[i].id" check for? We do it *almost* everywhere but
> it doesn't seem required.

clks[i].id is always valid. no need to check here. I'll remove all
related check.


>
>> + }
>> +}
>> +
>> +void asr_register_fixed_factor_clks(struct asr_clk_unit *unit,
>> + struct asr_param_fixed_factor_clk *clks,
>> + int size)
>> +{
>> + struct clk *clk;
>> + int i;
>> +
>> + for (i = 0; i < size; i++) {
>> + clk = clk_register_fixed_factor(NULL, clks[i].name,
>> + clks[i].parent_name,
>> + clks[i].flags, clks[i].mult,
>> + clks[i].div);
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: failed to register clock %s\n",
>> + __func__, clks[i].name);
>> + continue;
>> + }
>> + if (clks[i].id)
>> + unit->clk_table[clks[i].id] = clk;
>> + }
>> +}
>> +
>> +void asr_register_general_gate_clks(struct asr_clk_unit *unit,
>> + struct asr_param_general_gate_clk *clks,
>> + void __iomem *base, int size)
>> +{
>> + struct clk *clk;
>> + int i;
>> +
>> + for (i = 0; i < size; i++) {
>> + clk = clk_register_gate(NULL, clks[i].name,
>> + clks[i].parent_name,
>> + clks[i].flags,
>> + base + clks[i].offset,
>> + clks[i].bit_idx,
>> + clks[i].gate_flags,
>> + clks[i].lock);
>> +
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: failed to register clock %s\n",
>> + __func__, clks[i].name);
>> + continue;
>> + }
>> + if (clks[i].id)
>> + unit->clk_table[clks[i].id] = clk;
>> + }
>> +}
>> +
>> +void asr_register_gate_clks(struct asr_clk_unit *unit,
>> + struct asr_param_gate_clk *clks,
>> + void __iomem *base, int size)
>> +{
>> + struct clk *clk;
>> + int i;
>> +
>> + for (i = 0; i < size; i++) {
>> + clk = asr_clk_register_gate(NULL, clks[i].name,
>> + clks[i].parent_name,
>> + clks[i].flags,
>> + base + clks[i].offset,
>> + clks[i].mask,
>> + clks[i].val_enable,
>> + clks[i].val_disable,
>> + clks[i].gate_flags,
>> + clks[i].lock);
>> +
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: failed to register clock %s\n",
>> + __func__, clks[i].name);
>> + continue;
>> + }
>> + if (clks[i].id)
>> + unit->clk_table[clks[i].id] = clk;
>> + }
>> +}
>> +
>> +void asr_register_mux_clks(struct asr_clk_unit *unit,
>> + struct asr_param_mux_clk *clks,
>> + void __iomem *base, int size)
>> +{
>> + struct clk *clk;
>> + int i;
>> +
>> + for (i = 0; i < size; i++) {
>> + clk = clk_register_mux(NULL, clks[i].name,
>> + clks[i].parent_name,
>> + clks[i].num_parents,
>> + clks[i].flags,
>> + base + clks[i].offset,
>> + clks[i].shift,
>> + clks[i].width,
>> + clks[i].mux_flags,
>> + clks[i].lock);
>> +
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: failed to register clock %s\n",
>> + __func__, clks[i].name);
>> + continue;
>> + }
>> + if (clks[i].id)
>> + unit->clk_table[clks[i].id] = clk;
>> + }
>> +}
>> +
>> +void asr_register_div_clks(struct asr_clk_unit *unit,
>> + struct asr_param_div_clk *clks,
>> + void __iomem *base, int size)
>> +{
>> + struct clk *clk;
>> + int i;
>> +
>> + for (i = 0; i < size; i++) {
>> + clk = clk_register_divider(NULL, clks[i].name,
>> + clks[i].parent_name,
>> + clks[i].flags,
>> + base + clks[i].offset,
>> + clks[i].shift,
>> + clks[i].width,
>> + clks[i].div_flags,
>> + clks[i].lock);
>> +
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: failed to register clock %s\n",
>> + __func__, clks[i].name);
>> + continue;
>> + }
>> + if (clks[i].id)
>> + unit->clk_table[clks[i].id] = clk;
>> + }
>> +}
>> +
>> +void asr_clk_add(struct asr_clk_unit *unit, unsigned int id,
>> + struct clk *clk)
>> +{
>> + if (IS_ERR_OR_NULL(clk)) {
> Better to fix the error handling in aquilac_general_clk_init() so you
> can remove this check.

I'll refine it.


>
>> + pr_err("CLK %d has invalid pointer %p\n", id, clk);
>> + return;
>> + }
>> + if (id > unit->nr_clks) {
> This test is off by one because if "id == unit->nr_clks" we write one
> element beyond the end of the array.

It makes sense. I'll fix it.


>
>> + pr_err("CLK %d is invalid\n", id);
>> + return;
>> + }
>> +
>> + unit->clk_table[id] = clk;
>> +}
>> diff --git a/drivers/clk/asr/clk.h b/drivers/clk/asr/clk.h
>> new file mode 100644
>> index 0000000..abe39cc
>> --- /dev/null
>> +++ b/drivers/clk/asr/clk.h
>> @@ -0,0 +1,235 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * asr clock source file
>> + *
>> + * Copyright (C) 2019 ASR Microelectronics(Shanghai) Co., Ltd.
>> + * Gang Wu <gangwu@xxxxxxxxxxxx>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#ifndef __ASR_CLK_H__
>> +#define __ASR_CLK_H__
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +
>> +#define APBC_NO_BUS_CTRL BIT(0)
>> +#define APBC_POWER_CTRL BIT(1)
>> +
>> +#define MHZ (1000000UL)
>> +#define KHZ_TO_HZ (1000)
>> +#define MHZ_TO_KHZ (1000)
>> +
>> +/* Clock type "gate". ASR private gate */
>> +#define ASR_CLK_GATE_NEED_DELAY BIT(0)
>> +
>> +/* Clock type "mix" */
>> +#define ASR_CLK_BITS_MASK(width, shift) \
>> + (((1 << (width)) - 1) << (shift))
>> +#define ASR_CLK_BITS_GET_VAL(data, width, shift) \
>> + ((data & ASR_CLK_BITS_MASK(width, shift)) >> (shift))
>> +#define ASR_CLK_BITS_SET_VAL(val, width, shift) \
>> + (((val) << (shift)) & ASR_CLK_BITS_MASK(width, shift))
>> +
>> +enum {
>> + ASR_CLK_MIX_TYPE_1REG_NOFC_V1,
>> + ASR_CLK_MIX_TYPE_1REG_FC_V2,
>> + ASR_CLK_MIX_TYPE_2REG_NOFC_V3,
>> + ASR_CLK_MIX_TYPE_2REG_FC_V4,
>> +};
>> +
>> +/* The register layout */
>> +struct asr_clk_mix_reg_info {
>> + void __iomem *reg_clk_ctrl;
>> + void __iomem *reg_clk_sel;
>> + void __iomem *reg_clk_xtc;
>> + u8 width_div;
>> + u8 shift_div;
>> + u8 width_mux;
>> + u8 shift_mux;
>> + u32 bit_fc;
>> +};
>> +
>> +/* The suggested clock table from user. */
>> +struct asr_clk_mix_clk_table {
>> + unsigned long rate;
>> + u8 parent_index;
>> + unsigned int divisor;
>> + unsigned int valid;
>> + unsigned int xtc;
>> +};
>> +
>> +struct asr_clk_mix_config {
>> + struct asr_clk_mix_reg_info reg_info;
>> + struct asr_clk_mix_clk_table *table;
>> + unsigned int table_size;
>> + struct clk_div_table *div_table;
>> + unsigned long div_flags;
>> + unsigned long mux_flags;
>> +};
>> +
>> +struct asr_clk_mix {
>> + struct clk_hw hw;
>> + struct asr_clk_mix_reg_info reg_info;
>> + struct asr_clk_mix_clk_table *table;
>> + struct clk_div_table *div_table;
>> + unsigned int table_size;
>> + unsigned long div_flags;
>> + unsigned long mux_flags;
>> + spinlock_t *lock;
>> +};
>> +
>> +extern struct clk *asr_clk_register_mix(struct device *dev,
>> + const char *name,
>> + const char **parent_names,
>> + u8 num_parents,
>> + unsigned long flags,
>> + struct asr_clk_mix_config *config,
>> + spinlock_t *lock);
>> +
>> +struct asr_clk_gate {
>> + struct clk_hw hw;
>> + void __iomem *reg;
>> + u32 mask;
>> + u32 val_enable;
>> + u32 val_disable;
>> + unsigned long flags;
>> + spinlock_t *lock;
>> +};
>> +
>> +extern const struct clk_ops asr_clk_gate_ops;
>> +extern struct clk *asr_clk_register_gate(struct device *dev, const char *name,
>> + const char *parent_name, unsigned long flags,
>> + void __iomem *reg, u32 mask, u32 val_enable,
>> + u32 val_disable, unsigned long gate_flags,
>> + spinlock_t *lock);
>> +
>> +
>> +extern struct clk *asr_clk_register_pll2(const char *name,
>> + const char *parent_name, unsigned long flags);
>> +extern struct clk *asr_clk_register_apbc(const char *name,
>> + const char *parent_name, void __iomem *base,
>> + unsigned int delay, unsigned long apbc_flags, spinlock_t *lock);
>> +extern struct clk *asr_clk_register_apmu(const char *name,
>> + const char *parent_name, void __iomem *base, u32 enable_mask,
>> + spinlock_t *lock);
>> +
>> +struct asr_clk_unit {
>> + unsigned int nr_clks;
>> + struct clk **clk_table;
>> + struct clk_onecell_data clk_data;
>> +};
>> +
>> +struct asr_clk_data {
>> + struct asr_clk_unit unit;
>> + void __iomem *mpmu_base;
>> + void __iomem *apmu_base;
>> + void __iomem *apbc_base;
>> + void __iomem *apbs_base;
>> + void __iomem *ciu_base;
>> + void __iomem *dciu_base;
>> + void __iomem *ddrc_base;
>> +};
>> +
>> +struct asr_param_fixed_rate_clk {
>> + unsigned int id;
>> + char *name;
>> + const char *parent_name;
>> + unsigned long flags;
>> + unsigned long fixed_rate;
>> +};
>> +void asr_register_fixed_rate_clks(struct asr_clk_unit *unit,
>> + struct asr_param_fixed_rate_clk *clks,
>> + int size);
>> +
>> +struct asr_param_fixed_factor_clk {
>> + unsigned int id;
>> + char *name;
>> + const char *parent_name;
>> + unsigned long mult;
>> + unsigned long div;
>> + unsigned long flags;
>> +};
>> +void asr_register_fixed_factor_clks(struct asr_clk_unit *unit,
>> + struct asr_param_fixed_factor_clk *clks,
>> + int size);
>> +
>> +struct asr_param_general_gate_clk {
>> + unsigned int id;
>> + const char *name;
>> + const char *parent_name;
>> + unsigned long offset;
>> + u8 bit_idx;
>> + unsigned long gate_flags;
>> + spinlock_t *lock;
>> + unsigned long flags;
>> +};
>> +void asr_register_general_gate_clks(struct asr_clk_unit *unit,
>> + struct asr_param_general_gate_clk *clks,
>> + void __iomem *base, int size);
>> +
>> +struct asr_param_gate_clk {
>> + unsigned int id;
>> + char *name;
>> + const char *parent_name;
>> + unsigned long flags;
>> + unsigned long offset;
>> + u32 mask;
>> + u32 val_enable;
>> + u32 val_disable;
>> + unsigned long gate_flags;
>> + spinlock_t *lock;
>> +};
>> +void asr_register_gate_clks(struct asr_clk_unit *unit,
>> + struct asr_param_gate_clk *clks,
>> + void __iomem *base, int size);
>> +
>> +struct asr_param_mux_clk {
>> + unsigned int id;
>> + char *name;
>> + const char * const *parent_name;
>> + u8 num_parents;
>> + unsigned long flags;
>> + unsigned long offset;
>> + u8 shift;
>> + u8 width;
>> + unsigned long mux_flags;
>> + spinlock_t *lock;
>> +};
>> +void asr_register_mux_clks(struct asr_clk_unit *unit,
>> + struct asr_param_mux_clk *clks,
>> + void __iomem *base, int size);
>> +
>> +struct asr_param_div_clk {
>> + unsigned int id;
>> + char *name;
>> + const char *parent_name;
>> + unsigned long flags;
>> + unsigned long offset;
>> + u8 shift;
>> + u8 width;
>> + unsigned long div_flags;
>> + spinlock_t *lock;
>> +};
>> +void asr_register_div_clks(struct asr_clk_unit *unit,
>> + struct asr_param_div_clk *clks,
>> + void __iomem *base, int size);
>> +
>> +#define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc) \
>> +{ \
>> + .width_div = (w_d), \
>> + .shift_div = (s_d), \
>> + .width_mux = (w_m), \
>> + .shift_mux = (s_m), \
>> + .bit_fc = (fc), \
>> +}
>> +
>> +int asr_clk_init(struct device_node *np, struct asr_clk_unit *unit,
>> + int nr_clks);
>> +void asr_clk_add(struct asr_clk_unit *unit, unsigned int id,
>> + struct clk *clk);
>> +void asr_clks_enable(char **clk_table, int clk_table_size);
>> +#endif
>> --
>> 2.7.4
Thanks a lot for the comments and suggestions.