[PATCH v2 4/7] fbdev: sm712fb: add 32-bit color modes, drops some other modes.

From: Yifeng Li
Date: Fri Mar 22 2019 - 01:18:39 EST


The modesetting in sm712fb is an ugly hack. First, all the registers
are programmed by hardcoded register arrays, which makes it difficult
to support different variations of color depths, refresh rates, CRT/LCD
panel, etc of the same resolution. Second, it means the standard
fb_find_mode() cannot be used and a confusing non-standard "vga="
parameter is needed. Third, there's only minimum differences between
some modes, yet around 70 lines of code and 100 registers are needed to
be indepentently specified for each mode. Fourth, the register between
some modes are inconsistent: the register configuration of different
color depths in 640 x 480 modes are identical, but for 800 x 600 modes
it's completely different. Also, some modes can drive the LCD panel
properly yet some other modes will only show a white screen of death on
the LCD panel. Fifth, some modes, such as 32-bit color modes, are
supported but never listed, and some modes are listed, such as 1280x1024
modes, but never supported by the register configuration arrays. And
some modes are partially implemented but neither listed nor supported,
i.e. the 8-bit color modes.

Fixing these problems requires a complete rewrite of modesetting code,
which is well-beyond my motivation. This commit only perform a minimum
cleanup:

1. Remove the 320 x 240 register settings, since there are never listed
and never actually being used. This resolution is not even supported by
vesafb, so it's safe to assume that no one is using such hardware. Future
developers who needs them can simply recover them from the git history.

2. Remove 1280x1024 modes and 8-bit color modes. They are listed but never
supported by the register array. So it doesn't work in the beginning, and
only gives a black screen.

3. Add 32-bit color modes. They are supported but never listed, and are
useful to some users.

Signed-off-by: Yifeng Li <tomli@xxxxxxxx>
---
drivers/video/fbdev/sm712fb.c | 158 +++++++---------------------------
1 file changed, 31 insertions(+), 127 deletions(-)

diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c
index 75d60ea63883..5e887653ef5d 100644
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -118,25 +118,48 @@ struct vesa_mode {
};

static const struct vesa_mode vesa_mode_table[] = {
- {"0x301", 640, 480, 8},
- {"0x303", 800, 600, 8},
- {"0x305", 1024, 768, 8},
- {"0x307", 1280, 1024, 8},
-
{"0x311", 640, 480, 16},
{"0x314", 800, 600, 16},
{"0x317", 1024, 768, 16},
- {"0x31A", 1280, 1024, 16},

{"0x312", 640, 480, 24},
{"0x315", 800, 600, 24},
{"0x318", 1024, 768, 24},
- {"0x31B", 1280, 1024, 24},
+
+ {"0x329", 640, 480, 32},
+ {"0x32e", 800, 600, 32},
+ {"0x338", 1024, 768, 32},
};

/**********************************************************************
SM712 Mode table.
- **********************************************************************/
+
+ The modesetting in sm712fb is an ugly hack. First, all the registers
+ are programmed by hardcoded register arrays, which makes it difficult
+ to support different variations of color depths, refresh rates, CRT/LCD
+ panel, etc of the same resolution. Second, it means the standard
+ fb_find_mode() cannot be used and a confusing non-standard "vga="
+ parameter is needed. Third, there's only minimum differences between
+ some modes, yet around 70 lines of code and 100 registers are needed to
+ be indepentently specified for each mode. Fourth, the register between
+ some modes are inconsistent: the register configuration of different
+ color depths in 640 x 480 modes are identical, but for 800 x 600 modes
+ it's completely different. Also, some modes can drive the LCD panel
+ properly yet some other modes will only show a white screen of death on
+ the LCD panel. Fifth, there is a specific hack for Lemote Loongson 8089D
+ laptop, the 1024x768, 16-bit color mode was modified to drive its LCD panel
+ and changed to 1024x600, but the original mode was not preserved, so
+ 1024x768 16-bit color mode is completely unsupported. And previously,
+ some modes are listed, such as 1280x1024 modes, but never supported by
+ the register configuration arrays, so they are now removed. And some modes
+ are partially implemented but neither listed nor supported, i.e. the 8-bit
+ color modes, so they have been removed from vesa_mode_table, too.
+
+ I'm not the original author of the code, fixing these problems requires a
+ complete rewrite of modesetting code, which is well-beyond my motivation.
+
+ See Documentation/fb/sm712fb.txt for more information.
+**********************************************************************/
static const struct modeinit vgamode[] = {
{
/* mode#0: 640 x 480 16Bpp 60Hz */
@@ -732,125 +755,6 @@ static const struct modeinit vgamode[] = {
0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
},
},
- { /* mode#6: 320 x 240 16Bpp 60Hz */
- 320, 240, 16, 60,
- /* Init_MISC */
- 0xEB,
- { /* Init_SR0_SR4 */
- 0x03, 0x01, 0x0F, 0x03, 0x0E,
- },
- { /* Init_SR10_SR24 */
- 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
- 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0xC4, 0x32, 0x02, 0x01, 0x01,
- },
- { /* Init_SR30_SR75 */
- 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
- 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
- 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
- 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
- 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
- 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
- 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
- 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43,
- 0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
- },
- { /* Init_SR80_SR93 */
- 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
- 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
- 0x00, 0x00, 0x00, 0x00,
- },
- { /* Init_SRA0_SRAF */
- 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
- 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
- },
- { /* Init_GR00_GR08 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
- 0xFF,
- },
- { /* Init_AR00_AR14 */
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
- 0x41, 0x00, 0x0F, 0x00, 0x00,
- },
- { /* Init_CR00_CR18 */
- 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
- 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
- 0xFF,
- },
- { /* Init_CR30_CR4D */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
- 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
- 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00,
- 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF,
- },
- { /* Init_CR90_CRA7 */
- 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
- 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
- 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
- },
- },
-
- { /* mode#8: 320 x 240 32Bpp 60Hz */
- 320, 240, 32, 60,
- /* Init_MISC */
- 0xEB,
- { /* Init_SR0_SR4 */
- 0x03, 0x01, 0x0F, 0x03, 0x0E,
- },
- { /* Init_SR10_SR24 */
- 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
- 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0xC4, 0x32, 0x02, 0x01, 0x01,
- },
- { /* Init_SR30_SR75 */
- 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
- 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
- 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
- 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
- 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
- 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
- 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
- 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43,
- 0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
- },
- { /* Init_SR80_SR93 */
- 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
- 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
- 0x00, 0x00, 0x00, 0x00,
- },
- { /* Init_SRA0_SRAF */
- 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
- 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
- },
- { /* Init_GR00_GR08 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
- 0xFF,
- },
- { /* Init_AR00_AR14 */
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
- 0x41, 0x00, 0x0F, 0x00, 0x00,
- },
- { /* Init_CR00_CR18 */
- 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
- 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
- 0xFF,
- },
- { /* Init_CR30_CR4D */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
- 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
- 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00,
- 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF,
- },
- { /* Init_CR90_CRA7 */
- 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
- 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
- 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
- },
- },
};


--
2.20.1