[PATCH v2] EDAC, mellanox: Add ECC support for BlueField DDR4

From: Junhan Zhou
Date: Mon Mar 18 2019 - 14:39:23 EST


Add ECC support for Mellanox BlueField SoC DDR controller.
This requires SMC to the running Arm Trusted Firmware to report
what is the current memory configuration.

Signed-off-by: Junhan Zhou <Junhan@xxxxxxxxxxxx>
---
MAINTAINERS | 5 +
drivers/edac/Kconfig | 7 +
drivers/edac/Makefile | 1 +
drivers/edac/bluefield_edac.c | 396 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 409 insertions(+)
create mode 100644 drivers/edac/bluefield_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e17ebf7..394d6c9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5539,6 +5539,11 @@ S: Supported
F: drivers/edac/aspeed_edac.c
F: Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt

+EDAC-BLUEFIELD
+M: Junhan Zhou <Junhan@xxxxxxxxxxxx>
+S: Supported
+F: drivers/edac/bluefield_edac.c
+
EDAC-CALXEDA
M: Robert Richter <rric@xxxxxxxxxx>
L: linux-edac@xxxxxxxxxxxxxxx
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 47eb4d1..dfb36f2 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -504,4 +504,11 @@ config EDAC_ASPEED
First, ECC must be configured in the bootloader. Then, this driver
will expose error counters via the EDAC kernel framework.

+config EDAC_BLUEFIELD
+ tristate "Mellanox BlueField Memory ECC"
+ depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || COMPILE_TEST
+ help
+ Support for error detection and correction on the
+ Mellanox BlueField SoCs.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 89ad4a84..0294a67 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -84,3 +84,4 @@ obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o
obj-$(CONFIG_EDAC_TI) += ti_edac.o
obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o
obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o
+obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o
diff --git a/drivers/edac/bluefield_edac.c b/drivers/edac/bluefield_edac.c
new file mode 100644
index 0000000..981f419
--- /dev/null
+++ b/drivers/edac/bluefield_edac.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Bluefield-specific EDAC driver.
+ *
+ * Copyright (c) 2019 Mellanox Technologies.
+ */
+
+#include <linux/acpi.h>
+#include <linux/arm-smccc.h>
+#include <linux/edac.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "edac_module.h"
+
+#define DRIVER_NAME "bluefield-edac"
+
+/*
+ * Mellanox BlueField EMI (External Memory Interface) register definitions.
+ * Registers which have individual bitfields have a union defining the
+ * bitfields following the address define.
+ */
+
+#define MLXBF_EMI_DRAM_ECC_COUNT 0x340
+
+union mlxbf_emi_dram_ecc_count {
+ struct {
+ u32 single_error_count : 16;
+ u32 double_error_count : 16;
+ };
+
+ u32 word;
+};
+
+#define MLXBF_EMI_DRAM_ECC_ERROR 0x348
+
+union mlxbf_emi_dram_ecc_error {
+ struct {
+ u32 dram_ecc_single : 1;
+ u32 __reserved_0 : 15;
+ u32 dram_ecc_double : 1;
+ u32 __reserved_1 : 15;
+ };
+
+ u32 word;
+};
+
+#define MLXBF_EMI_DRAM_ECC_LATCH_SELECT 0x354
+
+union mlxbf_emi_dram_ecc_latch_select {
+ struct {
+ u32 dram_ecc_first : 1;
+ u32 __reserved_0 : 15;
+ u32 edge_sel : 4;
+ u32 __reserved_1 : 4;
+ u32 start : 1;
+ u32 __reserved_2 : 7;
+ };
+
+ u32 word;
+};
+
+#define MLXBF_EMI_DRAM_ERR_ADDR_0 0x358
+
+#define MLXBF_EMI_DRAM_ERR_ADDR_1 0x37c
+
+#define MLXBF_EMI_DRAM_SYNDROM 0x35c
+
+union mlxbf_emi_dram_syndrom {
+ struct {
+ u32 derr : 1;
+ u32 serr : 1;
+ u32 __reserved_0 : 14;
+ /* ECC syndrome (error bit according to the Hamming code). */
+ u32 syndrom : 10;
+ u32 __reserved_1 : 6;
+ };
+
+ u32 word;
+};
+
+#define MLXBF_EMI_DRAM_ADDITIONAL_INFO_0 0x364
+
+union mlxbf_emi_dram_additional_info_0 {
+ struct {
+ u32 err_bank : 4;
+ u32 err_lrank : 2;
+ u32 __reserved_0 : 2;
+ u32 err_prank : 2;
+ u32 __reserved_1 : 6;
+ u32 err_edge : 8;
+ u32 __reserved_2 : 8;
+ };
+
+ u32 word;
+};
+
+#define MLXBF_EDAC_DIMM_PER_MC 2
+#define MLXBF_EDAC_ERROR_GRAIN 8
+
+/*
+ * Request MLNX_SIP_GET_DIMM_INFO
+ *
+ * Retrieve information about DIMM on a certain slot.
+ *
+ * Call register usage:
+ * a0: MLNX_SIP_GET_DIMM_INFO
+ * a1: (Memory controller index) << 16 | (Dimm index in memory controller)
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: dimm_info_smc union defined below describing the DIMM.
+ * a1-3: not used.
+ */
+#define MLNX_SIP_GET_DIMM_INFO 0x82000008
+
+/* Format for the SMC response about the memory information */
+union dimm_info_smc {
+ struct {
+ unsigned long size_GB : 16;
+ unsigned long is_rdimm : 1;
+ unsigned long is_lrdimm : 1;
+ unsigned long is_nvdimm : 1;
+ unsigned long __reserved0 : 2;
+ unsigned long ranks : 3;
+ unsigned long package_X : 8; /* Bits per memory package */
+ unsigned long __reserved1 : 32;
+ };
+ unsigned long val;
+};
+
+struct bluefield_edac_priv {
+ int dimm_ranks[MLXBF_EDAC_DIMM_PER_MC];
+ void __iomem *emi_base;
+};
+
+static unsigned long smc_call1(unsigned long smc_op, unsigned long smc_arg)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(smc_op, smc_arg, 0, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+/*
+ * Gather the ECC information from the External Memory Interface registers
+ * and report it to the edac handler.
+ */
+static void bluefield_gather_report_ecc(struct mem_ctl_info *mci,
+ int error_cnt,
+ int is_single_ecc)
+{
+ struct bluefield_edac_priv *priv = mci->pvt_info;
+ union mlxbf_emi_dram_additional_info_0 edai0;
+ union mlxbf_emi_dram_ecc_latch_select edels;
+ union mlxbf_emi_dram_syndrom eds;
+ enum hw_event_mc_err_type ecc_type;
+ unsigned long ecc_dimm_addr;
+ int ecc_dimm;
+ u32 edea0;
+ u32 edea1;
+
+ ecc_type = is_single_ecc ? HW_EVENT_ERR_CORRECTED :
+ HW_EVENT_ERR_UNCORRECTED;
+
+ /*
+ * Tell the External Memory Interface to populate the relevant
+ * registers with information about the last ECC error occurrence.
+ */
+ edels.word = 0;
+ edels.start = 1;
+ writel(edels.word, priv->emi_base + MLXBF_EMI_DRAM_ECC_LATCH_SELECT);
+
+ /*
+ * Verify that the ECC reported info in the registers is of the
+ * same type as the one asked to report. If not, just report the
+ * error without the detailed information.
+ */
+ eds.word = readl(priv->emi_base + MLXBF_EMI_DRAM_SYNDROM);
+
+ if ((is_single_ecc && !eds.serr) || (!is_single_ecc && !eds.derr)) {
+ edac_mc_handle_error(ecc_type, mci, error_cnt, 0, 0, 0,
+ 0, 0, -1, mci->ctl_name, "");
+ return;
+ }
+
+ edai0.word = readl(priv->emi_base + MLXBF_EMI_DRAM_ADDITIONAL_INFO_0);
+
+ ecc_dimm = edai0.err_prank >= 2 && priv->dimm_ranks[0] <= 2;
+
+ edea0 = readl(priv->emi_base + MLXBF_EMI_DRAM_ERR_ADDR_0);
+ edea1 = readl(priv->emi_base + MLXBF_EMI_DRAM_ERR_ADDR_1);
+
+ ecc_dimm_addr = ((unsigned long)edea1 << 32) | edea0;
+
+ edac_mc_handle_error(ecc_type, mci, error_cnt,
+ ecc_dimm_addr / 0x1000, ecc_dimm_addr & 0xfff,
+ eds.syndrom, ecc_dimm, 0, 0, mci->ctl_name, "");
+}
+
+static void bluefield_edac_check(struct mem_ctl_info *mci)
+{
+ union mlxbf_emi_dram_ecc_error edee = { .word = 0 };
+ struct bluefield_edac_priv *priv = mci->pvt_info;
+ union mlxbf_emi_dram_ecc_count edec;
+
+ /*
+ * The memory controller might not be initialized by the firmware
+ * when there isn't memory, which may lead to bad register readings.
+ */
+ if (mci->edac_cap == EDAC_FLAG_NONE)
+ return;
+
+ edec.word = readl(priv->emi_base + MLXBF_EMI_DRAM_ECC_COUNT);
+
+ if (edec.single_error_count) {
+ edee.dram_ecc_single = 1;
+
+ bluefield_gather_report_ecc(mci, edec.single_error_count, 1);
+ }
+
+ if (edec.double_error_count) {
+ edee.dram_ecc_double = 1;
+
+ bluefield_gather_report_ecc(mci, edec.double_error_count, 0);
+ }
+
+ /* Write to clear reported errors. */
+ if (edec.word)
+ writel(edee.word, priv->emi_base + MLXBF_EMI_DRAM_ECC_ERROR);
+}
+
+/* Initialize the DIMMs information for the given memory controller. */
+static void bluefield_edac_init_dimms(struct mem_ctl_info *mci)
+{
+ struct bluefield_edac_priv *priv = mci->pvt_info;
+ int mem_ctrl_idx = mci->mc_idx;
+ union dimm_info_smc smc_info;
+ struct dimm_info *dimm;
+ unsigned long smc_arg;
+ int is_empty = 1;
+ int i;
+
+ for (i = 0; i < MLXBF_EDAC_DIMM_PER_MC; i++) {
+ dimm = mci->dimms[i];
+
+ smc_arg = mem_ctrl_idx << 16 | i;
+ smc_info = (union dimm_info_smc) {
+ .val = smc_call1(MLNX_SIP_GET_DIMM_INFO, smc_arg),
+ };
+
+ if (!smc_info.size_GB) {
+ dimm->mtype = MEM_EMPTY;
+ continue;
+ }
+
+ is_empty = 0;
+
+ dimm->edac_mode = EDAC_SECDED;
+
+ if (smc_info.is_nvdimm)
+ dimm->mtype = MEM_NVDIMM;
+ else if (smc_info.is_lrdimm)
+ dimm->mtype = MEM_LRDDR4;
+ else if (smc_info.is_rdimm)
+ dimm->mtype = MEM_RDDR4;
+ else
+ dimm->mtype = MEM_DDR4;
+
+ dimm->nr_pages = smc_info.size_GB * 256 * 1024;
+ dimm->grain = MLXBF_EDAC_ERROR_GRAIN;
+
+ /* Mem controller for BlueField only supports x4, x8 and x16 */
+ if (smc_info.package_X == 4)
+ dimm->dtype = DEV_X4;
+ else if (smc_info.package_X == 8)
+ dimm->dtype = DEV_X8;
+ else if (smc_info.package_X == 16)
+ dimm->dtype = DEV_X16;
+ else
+ dimm->dtype = DEV_UNKNOWN;
+
+ priv->dimm_ranks[i] = smc_info.ranks;
+ }
+
+ if (is_empty)
+ mci->edac_cap = EDAC_FLAG_NONE;
+ else
+ mci->edac_cap = EDAC_FLAG_SECDED;
+}
+
+static int bluefield_edac_mc_probe(struct platform_device *pdev)
+{
+ struct bluefield_edac_priv *priv;
+ struct device *dev = &pdev->dev;
+ struct edac_mc_layer layers[1];
+ struct mem_ctl_info *mci;
+ struct resource *emi_res;
+ unsigned int mc_idx;
+ int rc, ret;
+
+ /* Read the MSS (Memory SubSystem) index from ACPI table. */
+ if (device_property_read_u32(dev, "mss_number", &mc_idx)) {
+ dev_warn(dev, "bf_edac: MSS number unknown\n");
+ return -EINVAL;
+ }
+
+ emi_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!emi_res)
+ return -EINVAL;
+
+ layers[0].type = EDAC_MC_LAYER_SLOT;
+ layers[0].size = MLXBF_EDAC_DIMM_PER_MC;
+ layers[0].is_virt_csrow = true;
+
+ mci = edac_mc_alloc(mc_idx, ARRAY_SIZE(layers), layers, sizeof(*priv));
+ if (!mci)
+ return -ENOMEM;
+
+ priv = mci->pvt_info;
+
+ priv->emi_base = devm_ioremap_resource(dev, emi_res);
+ if (IS_ERR(priv->emi_base)) {
+ dev_err(dev, "failed to map EMI IO resource\n");
+ ret = PTR_ERR(priv->emi_base);
+ goto err;
+ }
+
+ mci->pdev = dev;
+ mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_RDDR4 |
+ MEM_FLAG_LRDDR4 | MEM_FLAG_NVDIMM;
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+
+ mci->mod_name = DRIVER_NAME;
+ mci->ctl_name = "BlueField_Memory_Controller";
+ mci->dev_name = dev_name(dev);
+ mci->edac_check = bluefield_edac_check;
+
+ /* Initialize mci with the actual populated DIMM information. */
+ bluefield_edac_init_dimms(mci);
+
+ platform_set_drvdata(pdev, mci);
+
+ /* Register with EDAC core */
+ rc = edac_mc_add_mc(mci);
+ if (rc) {
+ dev_err(dev, "failed to register with EDAC core\n");
+ ret = rc;
+ goto err;
+ }
+
+ /* Only POLL mode supported so far. */
+ edac_op_state = EDAC_OPSTATE_POLL;
+
+ return 0;
+
+err:
+ edac_mc_free(mci);
+
+ return ret;
+
+}
+
+static int bluefield_edac_mc_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static const struct acpi_device_id bluefield_mc_acpi_ids[] = {
+ {"MLNXBF08", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, bluefield_mc_acpi_ids);
+
+static struct platform_driver bluefield_edac_mc_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .acpi_match_table = bluefield_mc_acpi_ids,
+ },
+ .probe = bluefield_edac_mc_probe,
+ .remove = bluefield_edac_mc_remove,
+};
+
+module_platform_driver(bluefield_edac_mc_driver);
+
+MODULE_DESCRIPTION("Mellanox BlueField memory edac driver");
+MODULE_AUTHOR("Mellanox Technologies");
+MODULE_LICENSE("GPL v2");
--
2.1.2