Re: [PATCH v3 5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver

From: Neil Armstrong
Date: Mon Mar 18 2019 - 07:28:19 EST


On 18/03/2019 11:18, Kishon Vijay Abraham I wrote:
> Hi,
>
> On 18/03/19 3:41 PM, Neil Armstrong wrote:
>> This adds support for the USB2 PHY found in the Amlogic G12A SoC Family.
>>
>> It supports Host and/or Peripheral mode, depending on it's position.
>> The first PHY is only used as Host, but the second supports Dual modes
>> defined by the USB Control Glue HW in front of the USB Controllers.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
>> ---
>> drivers/phy/amlogic/Kconfig | 11 ++
>> drivers/phy/amlogic/Makefile | 1 +
>> drivers/phy/amlogic/phy-meson-g12a-usb2.c | 189 ++++++++++++++++++++++
>> 3 files changed, 201 insertions(+)
>> create mode 100644 drivers/phy/amlogic/phy-meson-g12a-usb2.c
>>
>> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
>> index 23fe1cda2f70..560ff0f1ed4c 100644
>> --- a/drivers/phy/amlogic/Kconfig
>> +++ b/drivers/phy/amlogic/Kconfig
>> @@ -36,3 +36,14 @@ config PHY_MESON_GXL_USB3
>> Enable this to support the Meson USB3 PHY and OTG detection
>> IP block found in Meson GXL and GXM SoCs.
>> If unsure, say N.
>> +
>> +config PHY_MESON_G12A_USB2
>> + tristate "Meson G12A USB2 PHY driver"
>> + default ARCH_MESON
>> + depends on OF && (ARCH_MESON || COMPILE_TEST)
>> + select GENERIC_PHY
>> + select REGMAP_MMIO
>> + help
>> + Enable this to support the Meson USB2 PHYs found in Meson
>> + G12A SoCs.
>> + If unsure, say N.
>> diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
>> index 4fd8848c194d..7d4d10f5a6b3 100644
>> --- a/drivers/phy/amlogic/Makefile
>> +++ b/drivers/phy/amlogic/Makefile
>> @@ -1,3 +1,4 @@
>> obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
>> obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
>> +obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
>> obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o
>> diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
>> new file mode 100644
>> index 000000000000..9f35259f237f
>> --- /dev/null
>> +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
>> @@ -0,0 +1,189 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Meson G12A USB2 PHY driver
>> + *
>> + * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
>> + * Copyright (C) 2017 Amlogic, Inc. All rights reserved
>> + * Copyright (C) 2019 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define PHY_CTRL_R0 0x0
>> +#define PHY_CTRL_R1 0x4
>> +#define PHY_CTRL_R2 0x8
>> +#define PHY_CTRL_R3 0xc
>> +#define PHY_CTRL_R4 0x10
>> +#define PHY_CTRL_R5 0x14
>> +#define PHY_CTRL_R6 0x18
>> +#define PHY_CTRL_R7 0x1c
>> +#define PHY_CTRL_R8 0x20
>> +#define PHY_CTRL_R9 0x24
>> +#define PHY_CTRL_R10 0x28
>> +#define PHY_CTRL_R11 0x2c
>> +#define PHY_CTRL_R12 0x30
>> +#define PHY_CTRL_R13 0x34
>> +#define PHY_CTRL_R14 0x38
>> +#define PHY_CTRL_R15 0x3c
>> +#define PHY_CTRL_R16 0x40
>> +#define PHY_CTRL_R17 0x44
>> +#define PHY_CTRL_R18 0x48
>> +#define PHY_CTRL_R19 0x4c
>> +#define PHY_CTRL_R20 0x50
>> +#define PHY_CTRL_R21 0x54
>> +#define PHY_CTRL_R22 0x58
>> +#define PHY_CTRL_R23 0x5c
>> +
>> +#define RESET_COMPLETE_TIME 1000
>> +#define PLL_RESET_COMPLETE_TIME 100
>> +
>> +struct phy_meson_g12a_usb2_priv {
>> + struct device *dev;
>> + struct regmap *regmap;
>> + struct clk *clk;
>> + struct reset_control *reset;
>> +};
>> +
>> +static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
>> + .reg_bits = 8,
>> + .val_bits = 32,
>> + .reg_stride = 4,
>> + .max_register = PHY_CTRL_R23,
>> +};
>> +
>> +static int phy_meson_g12a_usb2_init(struct phy *phy)
>> +{
>> + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
>> + int ret;
>> +
>> + ret = reset_control_reset(priv->reset);
>> + if (ret)
>> + return ret;
>> +
>> + udelay(RESET_COMPLETE_TIME);
>> +
>> + /* usb2_otg_aca_en == 0 */
>> + regmap_update_bits(priv->regmap, PHY_CTRL_R21, BIT(2), 0);
>> +
>> + /* PLL Setup : 24MHz * 20 / 1 = 480MHz */
>> + regmap_write(priv->regmap, PHY_CTRL_R16, 0x39400414);
>> + regmap_write(priv->regmap, PHY_CTRL_R17, 0x927e0000);
>> + regmap_write(priv->regmap, PHY_CTRL_R18, 0xac5f49e5);
>
> Please add macros for each of the individual bit-fields.

Will resent with this added.

Neil

>> +
>> + udelay(PLL_RESET_COMPLETE_TIME);
>> +
>> + /* UnReset PLL */
>> + regmap_write(priv->regmap, PHY_CTRL_R16, 0x19400414);
>
> Here too..
>
> Thanks
> Kishon
>