Re: [PATCH v5 2/2] drivers/misc: Add Aspeed P2A control driver

From: Patrick Venture
Date: Mon Mar 04 2019 - 13:31:37 EST


On Mon, Mar 4, 2019 at 7:45 AM Patrick Venture <venture@xxxxxxxxxx> wrote:
>
> On Sun, Mar 3, 2019 at 4:04 PM Andrew Jeffery <andrew@xxxxxxxx> wrote:
> >
> > Hi Patrick.
> >
> > I've got some minor comments, otherwise it looks reasonable to me.
> >
> > On Thu, 28 Feb 2019, at 12:22, Patrick Venture wrote:
> > > The ASPEED AST2400, and AST2500 in some configurations include a
> > > PCI-to-AHB MMIO bridge. This bridge allows a server to read and write
> > > in the BMC's physical address space. This feature is especially useful
> > > when using this bridge to send large files to the BMC.
> > >
> > > The host may use this to send down a firmware image by staging data at a
> > > specific memory address, and in a coordinated effort with the BMC's
> > > software stack and kernel, transmit the bytes.
> > >
> > > This driver enables the BMC to unlock the PCI bridge on demand, and
> > > configure it via ioctl to allow the host to write bytes to an agreed
> > > upon location. In the primary use-case, the region to use is known
> > > apriori on the BMC, and the host requests this information. Once this
> > > request is received, the BMC's software stack will enable the bridge and
> > > the region and then using some software flow control (possibly via IPMI
> > > packets), copy the bytes down. Once the process is complete, the BMC
> > > will disable the bridge and unset any region involved.
> > >
> > > The default behavior of this bridge when present is: enabled and all
> > > regions marked read-write. This driver will fix the regions to be
> > > read-only and then disable the bridge entirely.
> > >
> > > The memory regions protected are:
> > > * BMC flash MMIO window
> > > * System flash MMIO windows
> > > * SOC IO (peripheral MMIO)
> > > * DRAM
> > >
> > > The DRAM region itself is all of DRAM and cannot be further specified.
> > > Once the PCI bridge is enabled, the host can read all of DRAM, and if
> > > the DRAM section is write-enabled, then it can write to all of it.
> > >
> > > Signed-off-by: Patrick Venture <venture@xxxxxxxxxx>
> > > ---
> > > Changes for v5:
> > > - Fixup missing exit condition and remove extra jump.
> > > Changes for v4:
> > > - Added ioctl for reading back the memory-region configuration.
> > > - Cleaned up some unused variables.
> > > Changes for v3:
> > > - Deleted unused read and write methods.
> > > Changes for v2:
> > > - Dropped unused reads.
> > > - Moved call to disable bridge to before registering device.
> > > - Switch from using regs to using a syscon regmap. <<< IN PROGRESS
> > > - Updated the commit message. <<< TODO
> > > - Updated the bit flipped for SCU180_ENP2A
> > > - Dropped boolean region_specified variable.
> > > - Renamed p2a_ctrl in _probe to misc_ctrl per suggestion.
> > > - Renamed aspeed_p2a_region_search to aspeed_p2a_region_acquire
> > > - Updated commit message.
> > > ---
> > > drivers/misc/Kconfig | 8 +
> > > drivers/misc/Makefile | 1 +
> > > drivers/misc/aspeed-p2a-ctrl.c | 456 +++++++++++++++++++++++++++
> > > include/uapi/linux/aspeed-p2a-ctrl.h | 59 ++++
> > > 4 files changed, 524 insertions(+)
> > > create mode 100644 drivers/misc/aspeed-p2a-ctrl.c
> > > create mode 100644 include/uapi/linux/aspeed-p2a-ctrl.h
> > >
> > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > > index f417b06e11c5..9de1bafe5606 100644
> > > --- a/drivers/misc/Kconfig
> > > +++ b/drivers/misc/Kconfig
> > > @@ -485,6 +485,14 @@ config VEXPRESS_SYSCFG
> > > bus. System Configuration interface is one of the possible means
> > > of generating transactions on this bus.
> > >
> > > +config ASPEED_P2A_CTRL
> > > + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> > > + tristate "Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC bridge control"
> > > + help
> > > + Control Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC mappings
> > > through
> > > + ioctl()s, the driver also provides an interface for userspace
> > > mappings to
> > > + a pre-defined region.
> > > +
> > > config ASPEED_LPC_CTRL
> > > depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> > > tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
> > > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> > > index e39ccbbc1b3a..57577aee354f 100644
> > > --- a/drivers/misc/Makefile
> > > +++ b/drivers/misc/Makefile
> > > @@ -55,6 +55,7 @@ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
> > > obj-$(CONFIG_CXL_BASE) += cxl/
> > > obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> > > obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> > > +obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
> > > obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
> > > obj-$(CONFIG_OCXL) += ocxl/
> > > obj-y += cardreader/
> > > diff --git a/drivers/misc/aspeed-p2a-ctrl.c
> > > b/drivers/misc/aspeed-p2a-ctrl.c
> > > new file mode 100644
> > > index 000000000000..6bde4f64632d
> > > --- /dev/null
> > > +++ b/drivers/misc/aspeed-p2a-ctrl.c
> > > @@ -0,0 +1,456 @@
> > > +/*
> > > + * Copyright 2019 Google Inc
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License
> > > + * as published by the Free Software Foundation; either version
> > > + * 2 of the License, or (at your option) any later version.
> >
> > Should be a SPDX header instead.
>
> Ok, so delete the above and drop in:

Was set straight on this.

>
> """
> /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> """
>
> Or just add that to the top above the Google GNU copyright line? (I'm
> not a lawyer).
>
> >
> > > + *
> > > + * Provides a simple driver to control the ASPEED P2A interface which
> > > allows
> > > + * the host to read and write to various regions of the BMC's memory.
> > > + */
> > > +
> > > +#include <linux/fs.h>
> > > +#include <linux/io.h>
> > > +#include <linux/mfd/syscon.h>
> > > +#include <linux/miscdevice.h>
> > > +#include <linux/mm.h>
> > > +#include <linux/module.h>
> > > +#include <linux/mutex.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/uaccess.h>
> > > +
> > > +#include <linux/aspeed-p2a-ctrl.h>
> > > +
> > > +#define DEVICE_NAME "aspeed-p2a-ctrl"
> > > +
> > > +/* SCU2C is a Misc. Control Register. */
> > > +#define SCU2C 0x2c
> > > +/* SCU180 is the PCIe Configuration Setting Control Register. */
> > > +#define SCU180 0x180
> > > +/* Bit 1 controls the P2A bridge, while bit 0 controls the entire VGA
> > > device
> > > + * on the PCI bus. */
> >
> > As this wraps to multiple lines the trailing `*/` should be on a separate line.
> > There are a few instances of this throughout.
>
> Can do. I will also run checkpath -- I had done it initially, but I
> forgot on later editions.
>
> >
> > > +#define SCU180_ENP2A BIT(1)
> > > +
> > > +/* The ast2400/2500 both have six ranges. */
> > > +#define P2A_REGION_COUNT 6
> > > +
> > > +struct region {
> > > + u32 min;
> > > + u32 max;
> > > + u32 bit;
> > > +};
> > > +
> > > +struct aspeed_p2a_model_data {
> > > + /* min, max, bit */
> > > + struct region regions[P2A_REGION_COUNT];
> > > +};
> > > +
> > > +struct aspeed_p2a_ctrl {
> > > + struct miscdevice miscdev;
> > > + struct regmap *regmap;
> > > +
> > > + const struct aspeed_p2a_model_data *config;
> > > +
> > > + /* Access to these needs to be locked, held via probe, mapping ioctl,
> > > + * and release, remove.
> > > + */
> > > + struct mutex tracking;
> > > + u32 readers;
> > > + u32 readerwriters[P2A_REGION_COUNT];
> > > +
> > > + phys_addr_t mem_base;
> > > + resource_size_t mem_size;
> > > +};
> > > +
> > > +struct aspeed_p2a_user {
> > > + struct file *file;
> > > + struct aspeed_p2a_ctrl *parent;
> > > +
> > > + /** The entire memory space is opened for reading once the bridge is
> > > + * enabled, therefore this needs only to be tracked once per user.
> > > + * If any user has it open for read, the bridge must stay enabled.
> > > + */
> >
> > Generally the descriptions for the members are described in a kerneldoc
> > comment above the struct definition. Also you're mixing the kernel-doc
> > comment opener (`/**`) with non-kernel-doc comments (`/*` on the
> > tracking` mutex in `struct aspeed_p2a_ctrl` above).
>
> Ok, so anything that isn't really detailing the members, or functions,
> shouldn't be kerneldoc style. Will fix throughout.
>
> >
> > > + u32 read;
> > > +
> > > + /** Each entry of the array corresponds to a P2A Region. If the user
> > > + * opens for read or readwrite, the reference goes up here. On
> > > release,
> > > + * this array is walked and references adjusted accordingly.
> > > + */
> > > + u32 readwrite[P2A_REGION_COUNT];
> > > +};
> > > +
> > > +static void aspeed_p2a_enable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
> > > +{
> > > + regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A,
> > > SCU180_ENP2A);
> >
> > Wrap this at 80 chars.
>
> Roger.
>
> >
> > > +}
> > > +
> > > +static void aspeed_p2a_disable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
> > > +{
> > > + regmap_update_bits(p2witha_ctrl->regmap, SCU180, SCU180_ENP2A, 0);
> > > +}
> > > +
> > > +static int aspeed_p2a_mmap(struct file *file, struct vm_area_struct
> > > *vma)
> > > +{
> > > + struct aspeed_p2a_user *priv = file->private_data;
> > > + struct aspeed_p2a_ctrl *ctrl = priv->parent;
> > > +
> > > + if (ctrl->mem_base == 0 && ctrl->mem_size == 0)
> > > + return -EINVAL;
> > > +
> > > + unsigned long vsize = vma->vm_end - vma->vm_start;
> > > + pgprot_t prot = vma->vm_page_prot;
> > > +
> > > + if (vma->vm_pgoff + vsize > ctrl->mem_base + ctrl->mem_size)
> > > + return -EINVAL;
> > > +
> > > + /* ast2400/2500 AHB accesses are not cache coherent */
> > > + prot = pgprot_noncached(prot);
> > > +
> > > + if (remap_pfn_range(vma, vma->vm_start,
> > > + (ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
> > > + vsize, prot))
> > > + return -EAGAIN;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void aspeed_p2a_region_acquire(struct aspeed_p2a_user *priv,
> > > + struct aspeed_p2a_ctrl *ctrl,
> > > + struct aspeed_p2a_ctrl_mapping *map)
> > > +{
> > > + int i;
> > > + u32 base, end;
> > > +
> > > + base = map->addr;
> > > + end = map->addr + (map->length - 1);
> > > +
> > > + /* If the value is a legal u32, it will find a match. */
> > > + for (i = 0; i < P2A_REGION_COUNT; i++) {
> > > + const struct region *curr = &ctrl->config->regions[i];
> > > +
> > > + /* If the top of this region is lower than your base, skip it.
> > > + */
> > > + if (curr->max < base)
> > > + continue;
> > > +
> > > + /* If the bottom of this region is higher than your end, bail.
> > > + */
> > > + if (curr->min > end)
> > > + break;
> > > + /* Lock this and update it, therefore it someone else is
> > > + * closing their file out, this'll preserve the increment.
> > > + */
> > > + mutex_lock(&ctrl->tracking);
> > > + ctrl->readerwriters[i] += 1;
> > > + mutex_unlock(&ctrl->tracking);
> > > +
> > > + /* Track with the user, so when they close their file, we can
> > > + * decrement properly.
> > > + */
> >
> > The comments about tracking for decrement-on-release purposes is
> > useful, but I think the other comments in this loop are probably
> > unnecessary. Up to you though.
>
> I've often found drivers under-documented, so I went in the other direction.
>
> >
> > > + priv->readwrite[i] += 1;
> > > +
> > > + /* Enable the region as read-write. */
> > > + regmap_update_bits(ctrl->regmap, SCU2C, curr->bit, 0);
> > > + }
> > > +}
> > > +
> > > +static long aspeed_p2a_ioctl(struct file *file, unsigned int cmd,
> > > + unsigned long data)
> > > +{
> > > + struct aspeed_p2a_user *priv = file->private_data;
> > > + struct aspeed_p2a_ctrl *ctrl = priv->parent;
> > > + void __user *arg = (void __user *)data;
> > > + struct aspeed_p2a_ctrl_mapping map;
> > > +
> > > + if (copy_from_user(&map, arg, sizeof(map)))
> > > + return -EFAULT;
> > > +
> > > + switch (cmd) {
> > > + case ASPEED_P2A_CTRL_IOCTL_SET_WINDOW:
> > > + /* If they want a region to be read-only, since the entire
> > > + * region is read-only once enabled, we just need to track this
> > > + * user wants to read from the bridge, and if it's not enabled.
> > > + * Enable it.
> > > + */
> > > + if (map.flags == ASPEED_P2A_CTRL_READ_ONLY) {
> > > + mutex_lock(&ctrl->tracking);
> > > + ctrl->readers += 1;
> > > + mutex_unlock(&ctrl->tracking);
> > > +
> > > + /* Track with the user, so when they close their file,
> > > + * we can decrement properly.
> > > + */
> > > + priv->read += 1;
> > > + } else if (map.flags == ASPEED_P2A_CTRL_READWRITE) {
> > > + aspeed_p2a_region_acquire(priv, ctrl, &map);
> > > + } else {
> > > + /* Invalid map flags. */
> > > + return -EINVAL;
> > > + }
> > > +
> > > + aspeed_p2a_enable_bridge(ctrl);
> > > + return 0;
> > > + case ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG:
> > > + /* This is a request for the memory-region and corresponding
> > > + * length that is used by the driver for mmap. */
> > > +
> > > + map.flags = 0;
> > > + map.addr = ctrl->mem_base;
> > > + map.length = ctrl->mem_size;
> >
> > Thinking out loud here - do we want to allow ourselves an escape hatch
> > for supporting multiple reserved memory locations? Otherwise we might
> > need a new ioctl() for it. On the flip-side, not actually having this use-case
> > means we might break the implementation anyway, so it could be a
> > double-edged sword. Thoughts?
>
> How about this, I use a different structure that has an index -- so
> you pass in the structure with the index set, requesting the region
> information, and it returns the details for that memory-region until
> the index exceeds the number of regions and returns -ENODEV.
>
> However, to avoid extra complexity today, the dts will only support
> one memory region... The complexity of dealing with checking what
> region they want to use in mmap by checking what region has been
> enabled by that specific user may be too much of a pain though for the
> probable life of this driver. So yeah, a bit of a double-edged sword
> of complexity to approach the extra complexity even partially. I
> think having one memory-region is fine for now, and I can't see the
> future. Perhaps having the ioctl structure change and no other
> changes is sufficient while being extendable in the future if
> someone's need should arise. That way there won't be an obsolete
> ioctl or ambiguous ioctl (code that calls the old one and its result
> is quasi-incorrect).
>
> >
> > > +
> > > + return copy_to_user(arg, &map, sizeof(map)) ? -EFAULT : 0;
> > > + }
> > > +
> > > + return -EINVAL;
> > > +}
> > > +
> > > +
> > > +/**
> > > + * When a user opens this file, we create a structure to track their
> > > mappings.
> > > + *
> > > + * A user can map a region as read-only (bridge enabled), or
> > > read-write (bit
> > > + * flipped, and bridge enabled). Either way, this tracking is used,
> > > s.t. when
> > > + * they release the device references are handled.
> > > + *
> > > + * The bridge is not enabled until a user calls an ioctl to map a
> > > region,
> > > + * simply opening the device does not enable it.
> > > + */
> > > +static int aspeed_p2a_open(struct inode *inode, struct file *file)
> > > +{
> > > + struct aspeed_p2a_user *priv;
> > > +
> > > + priv = kmalloc(sizeof(*priv), GFP_KERNEL);
> > > + if (!priv)
> > > + return -ENOMEM;
> > > +
> > > + priv->file = file;
> > > + priv->read = 0;
> > > + memset(priv->readwrite, 0, sizeof(priv->readwrite));
> > > +
> > > + /* The file's private_data is initialized to the p2a_ctrl. */
> > > + priv->parent = file->private_data;
> > > +
> > > + /* Set the file's private_data to the user's data. */
> > > + file->private_data = priv;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/**
> > > + * This will close the users mappings. It will go through what they
> > > had opened
> > > + * for readwrite, and decrement those counts. If at the end, this is
> > > the last
> > > + * user, it'll close the bridge.
> > > + */
> > > +static int aspeed_p2a_release(struct inode *inode, struct file *file)
> > > +{
> > > + int i;
> > > + u32 value;
> > > + u32 bits = 0;
> > > + bool open_regions = false;
> > > + struct aspeed_p2a_user *priv = file->private_data;
> > > +
> > > + /* Lock others from changing these values until everything is updated
> > > + * in one pass */
> > > + mutex_lock(&priv->parent->tracking);
> > > +
> > > + priv->parent->readers -= priv->read;;
> > > +
> > > + for (i = 0; i < P2A_REGION_COUNT; i++) {
> > > + priv->parent->readerwriters[i] -= priv->readwrite[i];
> > > +
> > > + if (priv->parent->readerwriters[i] > 0)
> > > + open_regions = true;
> > > + else
> > > + bits |= priv->parent->config->regions[i].bit;
> > > + }
> > > +
> > > + /* Setting a bit to 1 disables the region, so let's just OR with the
> > > + * above to disable any.
> > > + */
> > > +
> > > + /* Note, if another user is trying to ioctl, they can't grab tracking,
> > > + * and therefore can't grab either register mutex.
> > > + * If another user is trying to close, they can't grab tracking
> > > either.
> > > + */
> > > + regmap_update_bits(priv->parent->regmap, SCU2C, bits, bits);
> > > +
> > > + /* If parent->readers is zero and open windows is 0, disable the
> > > + * bridge.
> > > + */
> > > + if (!open_regions && priv->parent->readers == 0)
> > > + aspeed_p2a_disable_bridge(priv->parent);
> > > +
> > > + mutex_unlock(&priv->parent->tracking);
> > > +
> > > + kfree(priv);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct file_operations aspeed_p2a_ctrl_fops = {
> > > + .owner = THIS_MODULE,
> > > + .mmap = aspeed_p2a_mmap,
> > > + .unlocked_ioctl = aspeed_p2a_ioctl,
> > > + .open = aspeed_p2a_open,
> > > + .release = aspeed_p2a_release,
> > > +};
> > > +
> > > +/** The regions are controlled by SCU2C */
> > > +static void aspeed_p2a_disable_all(struct aspeed_p2a_ctrl *p2a_ctrl)
> > > +{
> > > + int i;
> > > + u32 value = 0;
> > > +
> > > + for (i = 0; i < P2A_REGION_COUNT; i++)
> > > + value |= p2a_ctrl->config->regions[i].bit;
> > > +
> > > + regmap_update_bits(p2a_ctrl->regmap, SCU2C, value, value);
> > > +
> > > + /* Disable the bridge. */
> > > + aspeed_p2a_disable_bridge(p2a_ctrl);
> > > +}
> > > +
> > > +static int aspeed_p2a_ctrl_probe(struct platform_device *pdev)
> > > +{
> > > + struct aspeed_p2a_ctrl *misc_ctrl;
> > > + struct device *dev;
> > > + struct resource *res, resm;
> > > + struct device_node *node;
> > > + int rc = 0;
> > > +
> > > + dev = &pdev->dev;
> > > +
> > > + misc_ctrl = devm_kzalloc(dev, sizeof(*misc_ctrl), GFP_KERNEL);
> > > + if (!misc_ctrl)
> > > + return -ENOMEM;
> > > +
> > > + mutex_init(&misc_ctrl->tracking);
> > > + misc_ctrl->readers = 0;
> > > + memset(misc_ctrl->readerwriters, 0, sizeof(misc_ctrl->readerwriters));
> > > +
> > > + misc_ctrl->mem_size = 0;
> > > + misc_ctrl->mem_base = 0;
> > > +
> > > + /* optional. */
> > > + node = of_parse_phandle(dev->of_node, "memory-region", 0);
> > > + if (node) {
> > > + rc = of_address_to_resource(node, 0, &resm);
> > > + of_node_put(node);
> > > + if (rc) {
> > > + dev_err(dev, "Couldn't address to resource for reserved memory\n");
> >
> > I think the message could be improved, something like "No reserved memory
> > specified". Having said that, I don't think it should be an error condition either;
> > our experience with aspeed-lpc-ctrl was that it was useful for the memory-region
> > property to be optional. You already have:
>
> Ok.

Ok, when I read this, I see it as an error condition. In this case
the node was specified but was invalid.

>
> >
> > > +
> > > + if (ctrl->mem_base == 0 && ctrl->mem_size == 0)
> > > + return -EINVAL;
> >
> > in the mmap() callback, but we don't get that far unless someone has specified a
> > zero-sized reserved-memory node. I think supporting memory-region as optional
> > is just a matter of adding the same check to the GET_MEMORY_CONFIG ioctl().
> >
> > > + return -ENOMEM;
> >
> > The system isn't out of memory so this isn't an ENOMEM condition. I think ENODEV
> > is more appropriate, but if we make the memory region optional then this goes
> > away anyway.
>
> Roger.
>
> >
> > > + }
> > > +
> > > + misc_ctrl->mem_size = resource_size(&resm);
> > > + misc_ctrl->mem_base = resm.start;
> > > + }
> > > +
> > > + node = of_parse_phandle(dev->of_node, "syscon", 0);
> > > + if (!node) {
> > > + dev_err(dev, "Couldn't find syscon property\n");
> > > + return -ENODEV;
> > > + }
> > > +
> > > + misc_ctrl->regmap = syscon_node_to_regmap(node);
> > > + if (IS_ERR(misc_ctrl->regmap)) {
> > > + dev_err(dev, "Couldn't get regmap\n");
> > > + return -ENODEV;
> > > + }
> > > + of_node_put(node);
> > > +
> > > + misc_ctrl->config = of_device_get_match_data(dev);
> > > +
> > > + dev_set_drvdata(&pdev->dev, misc_ctrl);
> > > +
> > > + aspeed_p2a_disable_all(misc_ctrl);
> > > +
> > > + misc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
> > > + misc_ctrl->miscdev.name = DEVICE_NAME;
> > > + misc_ctrl->miscdev.fops = &aspeed_p2a_ctrl_fops;
> > > + misc_ctrl->miscdev.parent = dev;
> > > +
> > > + rc = misc_register(&misc_ctrl->miscdev);
> > > + if (rc)
> > > + dev_err(dev, "Unable to register device\n");
> > > +
> > > + return rc;
> > > +}
> > > +
> > > +static int aspeed_p2a_ctrl_remove(struct platform_device *pdev)
> > > +{
> > > + struct aspeed_p2a_ctrl *p2a_ctrl = dev_get_drvdata(&pdev->dev);
> > > +
> > > + misc_deregister(&p2a_ctrl->miscdev);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/*
> > > + * bit | SCU2C | ast2400
> > > + * 25 | DRAM | 0x40000000 - 0x5FFFFFFF
> > > + * 24 | SPI | 0x30000000 - 0x3FFFFFFF
> > > + * 23 | SOC | 0x18000000 - 0x1FFFFFFF, 0x60000000 - 0xFFFFFFFF
> > > + * 22 | FLASH | 0x00000000 - 0x17FFFFFF, 0x20000000 - 0x2FFFFFFF
> > > + *
> > > + * bit | SCU2C | ast2500
> > > + * 25 | DRAM | 0x80000000 - 0xFFFFFFFF
> > > + * 24 | SPI | 0x60000000 - 0x7FFFFFFF
> > > + * 23 | SOC | 0x10000000 - 0x1FFFFFFF, 0x40000000 - 0x5FFFFFFF
> > > + * 22 | FLASH | 0x00000000 - 0x0FFFFFFF, 0x20000000 - 0x3FFFFFFF
> > > + */
> >
> > The comment is probably unnecessary given the structure declarations
> > below.
>
> Fair enough, will drop it.
>
> >
> > > +
> > > +#define SCU2C_DRAM BIT(25)
> > > +#define SCU2C_SPI BIT(24)
> > > +#define SCU2C_SOC BIT(23)
> > > +#define SCU2C_FLASH BIT(22)
> > > +
> > > +static const struct aspeed_p2a_model_data ast2400_model_data = {
> > > + .regions = {
> > > + {0x00000000, 0x17FFFFFF, SCU2C_FLASH},
> > > + {0x18000000, 0x1FFFFFFF, SCU2C_SOC},
> > > + {0x20000000, 0x2FFFFFFF, SCU2C_FLASH},
> > > + {0x30000000, 0x3FFFFFFF, SCU2C_SPI},
> > > + {0x40000000, 0x5FFFFFFF, SCU2C_DRAM},
> > > + {0x60000000, 0xFFFFFFFF, SCU2C_SOC},
> > > + }
> > > +};
> > > +
> > > +static const struct aspeed_p2a_model_data ast2500_model_data = {
> > > + .regions = {
> > > + {0x00000000, 0x0FFFFFFF, SCU2C_FLASH},
> > > + {0x10000000, 0x1FFFFFFF, SCU2C_SOC},
> > > + {0x20000000, 0x3FFFFFFF, SCU2C_FLASH},
> > > + {0x40000000, 0x5FFFFFFF, SCU2C_SOC},
> > > + {0x60000000, 0x7FFFFFFF, SCU2C_SPI},
> > > + {0x80000000, 0xFFFFFFFF, SCU2C_DRAM},
> > > + }
> > > +};
> > > +
> > > +static const struct of_device_id aspeed_p2a_ctrl_match[] = {
> > > + { .compatible = "aspeed,ast2400-p2a-ctrl",
> > > + .data = &ast2400_model_data },
> > > + { .compatible = "aspeed,ast2500-p2a-ctrl",
> > > + .data = &ast2500_model_data },
> > > + { },
> > > +};
> > > +
> > > +static struct platform_driver aspeed_p2a_ctrl_driver = {
> > > + .driver = {
> > > + .name = DEVICE_NAME,
> > > + .of_match_table = aspeed_p2a_ctrl_match,
> > > + },
> > > + .probe = aspeed_p2a_ctrl_probe,
> > > + .remove = aspeed_p2a_ctrl_remove,
> > > +};
> > > +
> > > +module_platform_driver(aspeed_p2a_ctrl_driver);
> > > +
> > > +MODULE_DEVICE_TABLE(of, aspeed_p2a_ctrl_match);
> > > +MODULE_LICENSE("GPL");
> > > +MODULE_AUTHOR("Patrick Venture <venture@xxxxxxxxxx>");
> > > +MODULE_DESCRIPTION("Control for aspeed 2400/2500 P2A VGA HOST to BMC
> > > mappings");
> > > diff --git a/include/uapi/linux/aspeed-p2a-ctrl.h
> > > b/include/uapi/linux/aspeed-p2a-ctrl.h
> > > new file mode 100644
> > > index 000000000000..e839cdc31db9
> > > --- /dev/null
> > > +++ b/include/uapi/linux/aspeed-p2a-ctrl.h
> > > @@ -0,0 +1,59 @@
> > > +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> > > +/*
> > > + * Copyright 2019 Google Inc
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License
> > > + * as published by the Free Software Foundation; either version
> > > + * 2 of the License, or (at your option) any later version.
> >
> > SPDX again.
>
> So, only SPDX? I'm not super on the ball with this type of thing. I
> just mirrored what I saw in other recent aspeed drivers.
>
> >
> > > + *
> > > + * Provides a simple driver to control the ASPEED P2A interface which
> > > allows
> > > + * the host to read and write to various regions of the BMC's memory.
> > > + */
> > > +
> > > +#ifndef _UAPI_LINUX_ASPEED_P2A_CTRL_H
> > > +#define _UAPI_LINUX_ASPEED_P2A_CTRL_H
> > > +
> > > +#include <linux/ioctl.h>
> > > +#include <linux/types.h>
> > > +
> > > +#define ASPEED_P2A_CTRL_READ_ONLY 0
> > > +#define ASPEED_P2A_CTRL_READWRITE 1
> > > +
> > > +/*
> > > + * This driver provides a mechanism for enabling or disabling the
> > > read-write
> > > + * property of specific windows into the ASPEED BMC's memory.
> > > + *
> > > + * A user can map a region of the BMC's memory as read-only or
> > > read-write, with
> > > + * the caveat that once any region is mapped, all regions are unlocked
> > > for
> > > + * reading.
> > > + */
> > > +
> > > +/**
> > > + * Unlock a region of BMC physical memory for access from the host.
> > > + *
> > > + * Also used to read back the optional memory-region configuration for
> > > the
> > > + * driver.
> > > + */
> > > +struct aspeed_p2a_ctrl_mapping {
> > > + __u32 addr;
> > > + __u32 length;
> > > + __u32 flags;
> > > +};
> > > +
> > > +#define __ASPEED_P2A_CTRL_IOCTL_MAGIC 0xb3
> > > +
> > > +/**
> > > + * This IOCTL is meant to configure a region or regions of memory
> > > given a
> > > + * starting address and length to be readable by the host, or
> > > + * readable-writeable. */
> > > +#define ASPEED_P2A_CTRL_IOCTL_SET_WINDOW
> > > _IOW(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \
> > > + 0x00, struct aspeed_p2a_ctrl_mapping)
> > > +
> > > +/**
> > > + * This IOCTL is meant to read back to the user the base address and
> > > length of
> > > + * the memory-region specified to the driver for use with mmap. */
> > > +#define ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG
> > > _IOWR(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \
> >
> > Wrap this at 80?
> >
> > Cheers,
> >
> > Andrew
> >
> > > + 0x01, struct aspeed_p2a_ctrl_mapping)
> > > +
> > > +#endif /* _UAPI_LINUX_ASPEED_P2A_CTRL_H */
> > > --
> > > 2.21.0.rc2.261.ga7da99ff1b-goog
> > >
> > >