Re: [PATCH 7/9] drm/bridge: tc358767: Introduce tc_set_syspllparam()

From: Laurent Pinchart
Date: Mon Mar 04 2019 - 07:34:46 EST


Hi Andrey,

Thank you for the patch.

On Tue, Feb 26, 2019 at 11:36:07AM -0800, Andrey Smirnov wrote:
> Move common code converting clock rate to an appropriate constant and
> configuring SYS_PLLPARAM register into a separate routine and convert
> the rest of the code to use it. No functional change intended.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Chris Healy <cphealy@xxxxxxxxx>
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> drivers/gpu/drm/bridge/tc358767.c | 50 +++++++++++++------------------
> 1 file changed, 20 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 54ff95f66e30..227f14cd2d3d 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -522,35 +522,42 @@ static int tc_stream_clock_calc(struct tc_data *tc)
> return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
> }
>
> -static int tc_aux_link_setup(struct tc_data *tc)
> +static int tc_set_syspllparam(struct tc_data *tc)
> {
> unsigned long rate;
> - u32 value;
> - int ret;
> - u32 dp_phy_ctrl;
> + u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
>
> rate = clk_get_rate(tc->refclk);
> switch (rate) {
> case 38400000:
> - value = REF_FREQ_38M4;
> + pllparam |= REF_FREQ_38M4;
> break;
> case 26000000:
> - value = REF_FREQ_26M;
> + pllparam |= REF_FREQ_26M;
> break;
> case 19200000:
> - value = REF_FREQ_19M2;
> + pllparam |= REF_FREQ_19M2;
> break;
> case 13000000:
> - value = REF_FREQ_13M;
> + pllparam |= REF_FREQ_13M;
> break;
> default:
> dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
> return -EINVAL;
> }
>
> + return regmap_write(tc->regmap, SYS_PLLPARAM, pllparam);
> +}
> +
> +static int tc_aux_link_setup(struct tc_data *tc)
> +{
> + int ret;
> + u32 dp_phy_ctrl;
> +
> /* Setup DP-PHY / PLL */
> - value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
> - tc_write(SYS_PLLPARAM, value);
> + ret = tc_set_syspllparam(tc);
> + if (ret)
> + return ret;
>
> dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
> if (tc->link.base.num_lanes == 2)
> @@ -811,7 +818,6 @@ static int tc_main_link_setup(struct tc_data *tc)
> {
> struct drm_dp_aux *aux = &tc->aux;
> struct device *dev = tc->dev;
> - unsigned int rate;
> u32 dp_phy_ctrl;
> int timeout;
> u32 value;
> @@ -828,25 +834,9 @@ static int tc_main_link_setup(struct tc_data *tc)
> (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
> ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
>
> - rate = clk_get_rate(tc->refclk);
> - switch (rate) {
> - case 38400000:
> - value = REF_FREQ_38M4;
> - break;
> - case 26000000:
> - value = REF_FREQ_26M;
> - break;
> - case 19200000:
> - value = REF_FREQ_19M2;
> - break;
> - case 13000000:
> - value = REF_FREQ_13M;
> - break;
> - default:
> - return -EINVAL;
> - }
> - value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
> - tc_write(SYS_PLLPARAM, value);
> + ret = tc_set_syspllparam(tc);
> + if (ret)
> + return ret;
>
> /* Setup Main Link */
> dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
> --
> 2.20.1
>

--
Regards,

Laurent Pinchart