[PATCH v2 2/2] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute

[Beniamin Bia]

The custom phase and scale attributes were moved to standard iio types.

Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
---
Changes in v2:
	-the personal email address was replaced by the work email
	-separate define for every phase channel
	-enum used for write_phase functions
	-phase variables were replaced by an array

 drivers/staging/iio/frequency/ad9834.c | 53 ++++++++++++++++----------
 1 file changed, 32 insertions(+), 21 deletions(-)

diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 561617046c20..4366b6121154 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -82,6 +82,7 @@ struct ad9834_state {
 	struct mutex                    lock;   /* protect sensor state */
 
 	unsigned long			frequency[2];
+	unsigned long			phase[2];
 
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
@@ -113,6 +114,8 @@ enum ad9834_supported_device_ids {
 		.output = 1,						\
 		.channel = (chan),					\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY)	\
+						| BIT(IIO_CHAN_INFO_PHASE),\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
 }
 
 static const struct iio_chan_spec ad9833_channels[] = {
@@ -172,13 +175,26 @@ static int ad9834_write_frequency(struct ad9834_state *st,
 }
 
 static int ad9834_write_phase(struct ad9834_state *st,
-			      unsigned long addr, unsigned long phase)
+			      enum ad9834_ch_addr addr,
+			      unsigned long phase)
 {
+	int ret;
+
 	if (phase > BIT(AD9834_PHASE_BITS))
 		return -EINVAL;
-	st->data = cpu_to_be16(addr | phase);
 
-	return spi_sync(st->spi, &st->msg);
+	if (addr == AD9834_CHANNEL_ADDRESS0)
+		st->data = cpu_to_be16(AD9834_REG_PHASE0 | phase);
+	else
+		st->data = cpu_to_be16(AD9834_REG_PHASE1 | phase);
+
+	ret = spi_sync(st->spi, &st->msg);
+	if (ret)
+		return ret;
+
+	st->phase[(int)addr] = phase;
+
+	return 0;
 }
 
 static int ad9834_read_raw(struct iio_dev *indio_dev,
@@ -191,6 +207,13 @@ static int ad9834_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_FREQUENCY:
 		*val = st->frequency[chan->channel];
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_PHASE:
+		*val = st->phase[chan->channel];
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/*1 hz */
+		*val = 1;
+		return IIO_VAL_INT;
 	}
 
 	return -EINVAL;
@@ -207,6 +230,10 @@ static int ad9834_write_raw(struct iio_dev *indio_dev,
 		return ad9834_write_frequency(st,
 					      (enum ad9834_ch_addr)chan->channel,
 					      val);
+	case IIO_CHAN_INFO_PHASE:
+		return ad9834_write_phase(st,
+					  (enum ad9834_ch_addr)chan->channel,
+					  val);
 	default:
 		return  -EINVAL;
 	}
@@ -231,10 +258,6 @@ static ssize_t ad9834_write(struct device *dev,
 
 	mutex_lock(&st->lock);
 	switch ((u32)this_attr->address) {
-	case AD9834_REG_PHASE0:
-	case AD9834_REG_PHASE1:
-		ret = ad9834_write_phase(st, this_attr->address, val);
-		break;
 	case AD9834_OPBITEN:
 		if (st->control & AD9834_MODE) {
 			ret = -EINVAL;  /* AD9843 reserved mode */
@@ -394,12 +417,8 @@ static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, 0444,
  */
 
 static IIO_DEV_ATTR_FREQSYMBOL(0, 0200, NULL, ad9834_write, AD9834_FSEL);
-static IIO_CONST_ATTR_FREQ_SCALE(0, "1"); /* 1Hz */
 
-static IIO_DEV_ATTR_PHASE(0, 0, 0200, NULL, ad9834_write, AD9834_REG_PHASE0);
-static IIO_DEV_ATTR_PHASE(0, 1, 0200, NULL, ad9834_write, AD9834_REG_PHASE1);
 static IIO_DEV_ATTR_PHASESYMBOL(0, 0200, NULL, ad9834_write, AD9834_PSEL);
-static IIO_CONST_ATTR_PHASE_SCALE(0, "0.0015339808"); /* 2PI/2^12 rad*/
 
 static IIO_DEV_ATTR_PINCONTROL_EN(0, 0200, NULL,
 	ad9834_write, AD9834_PIN_SW);
@@ -410,10 +429,6 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
 static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
 
 static struct attribute *ad9834_attributes[] = {
-	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
-	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
-	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
-	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
 	&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
 	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
 	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
@@ -427,10 +442,6 @@ static struct attribute *ad9834_attributes[] = {
 };
 
 static struct attribute *ad9833_attributes[] = {
-	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
-	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
-	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
-	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
 	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
 	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
 	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
@@ -554,11 +565,11 @@ static int ad9834_probe(struct spi_device *spi)
 	if (ret)
 		goto error_clock_unprepare;
 
-	ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
+	ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS0, 512);
 	if (ret)
 		goto error_clock_unprepare;
 
-	ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
+	ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS1, 1024);
 	if (ret)
 		goto error_clock_unprepare;
 
-- 
2.17.1