[PATCH 0/8] add power management support for SAM9X60

[Claudiu.Beznea]

From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Hi,

This series add power management support for SAM9X60. The following
platform specific power management modes were enabled for it:
Idle, ULP0 and ULP1.

Thank you,
Claudiu Beznea

Claudiu Beznea (8):
  ARM: at91: pm: introduce at91_soc_pm structure
  dt-bindings: arm: atmel: add binding for SAM9X60 SoC
  ARM: at91: pm: initial PM support for SAM9X60
  ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
  ARM: at91: pm: add support for per SoC wakeup source configuration
  ARM: at91: pm: add ULP1 support for SAM9X60
  ARM: at91: pm: disable RC oscillator in ULP0
  ARM: at91: pm: do not disable/enable PLLA for ULP modes

 .../devicetree/bindings/arm/atmel-at91.txt         |   1 +
 arch/arm/mach-at91/at91sam9.c                      |  18 ++
 arch/arm/mach-at91/generic.h                       |   2 +
 arch/arm/mach-at91/pm.c                            | 193 ++++++++++++++-------
 arch/arm/mach-at91/pm_suspend.S                    | 111 ++++++++----
 include/linux/clk/at91_pmc.h                       |   1 +
 6 files changed, 232 insertions(+), 94 deletions(-)

-- 
2.7.4